Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to protect cars from hacking or key cloning, is a small device that can be installed without damaging your vehicle. It will not allow you to start your vehicle unless you press the correct sequence of buttons in your vehicle. It is similar to the mobile password.

Stop/Start

Ghost Immobilisers stop vehicles being stolen by preventing the engine from starting until it has the correct PIN code. This is done without modifications to the vehicle and is totally undetectable to thieves. The unit communicates with the ECU on the CAN data bus, which allows it to lock the vehicle. This system is like the one automobile manufacturers have used in their vehicles for a long time However, thieves can't add a new key or use key relay technology to bypass it, as they could with factory-installed systems.

Ghost is compatible with all vehicles with an engine, which includes motorhomes, vans, cars, caravans, and bikes. The same system can also be used on electric vehicles. It is an excellent alternative to steering wheel locks and wheel clamps and can be installed with little effort.

When the Ghost is armed it will block all buttons in your vehicle and prevent the ignition from being started until a PIN code has been entered first. This can be done using the Android or Apple mobile apps or by manually entering the code via your key fob. If a code that is incorrectly entered, the app will show an indicator light and the ghost immobiliser car will not allow the vehicle to start again. This is a great deterrent, and if the vehicle can't be started, the burglar will continue to pursue a new target.

The Ghost is small weatherproof device that is able to be hidden in the most difficult to access areas of your car. Installation takes between 20-30 minutes for each vehicle. It is also easy to remove if you choose to switch vehicles, or to give it to a service center or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) an insurance-approved system, which is recognized by some insurers. It also comes with an emergency lock that is secure Pin Code Override, and the Service/Valet feature that can be activated by pressing a button in the app, or by using your key fob.

Disarm

Ghost immobilisers, unlike mechanical anti-theft devices that are able to be removed, are concealed within the car. They are virtually impossible to bypass or hack and even if discovered, a burglar will not be able to start the engine. A ghost immobiliser is protected from key cloning, as well as signal jamming and devices spoofing. These are methods that thieves employ to gain entry into vehicles equipped that have standard immobilisers.

An immobiliser operates by sending a code to the ECU (electronic control unit). If a wrong code is received, the vehicle will not start since the engine won't fire up. It is possible to disable a ghost immobiliser using an application program, but it's extremely difficult and time-consuming to do so. Only an authorised installer can install and use the software.

The Ghost immobiliser is a small system that sits within the wiring loom of the vehicle and is inaccessible to the naked eye once installed. It is not visible on diagnostic systems, there are no LED indicators and it does not communicate with the engine through the OBD port. It communicates without sound through the CAN data circuit.

The system will stop the vehicle from starting unless it is given a specific PIN code sequence. This is entered through buttons on the steering wheel and door panels as well as the central console. This is a better way to safeguard your car as it doesn't require a remote control or key fob.

Ghost also has a service mode that can be activated via the mobile application. This allows you to give your keys to someone else to use for valet parking or service, without needing to enter an arm-disarm sequence.

If your Ghost is in service mode or not, you should not attempt to remove the system yourself because it could affect the engine and cause damage. It is recommended to speak with an installer certified by TASSA who will safely and effectively remove the system. Our newest GHOST II immobilisers also come with an exclusive QR fingerprint sticker that is hidden in different areas of your vehicle, which are linked to our international security register - in the event that the system is removed and sold on the black market this will link it back to the original owner.

Anti-Hijack

Ghost Immobiliser 2 has a very useful anti-hijack feature. This system works like a smart key and is among the most secure ways to keep your car safe from theft. If the ignition switch is turned to on and the vehicle is stationary for a period of 30 seconds then the Ghost system will automatically stall the engine and turn the warning lights on. This allows the driver or passenger time to press a security button (depending on the vehicle) before the system reactivates and the engine is once again allowed to begin.

The Ghost system, unlike other competitors, has a timer and controller unit that will close the fuel shut-off valve 14 after a set period of time. This happens even if the ignition remains on. This delay period must be sufficient to allow the person who was hijacked to drive away and a distance sufficient from the car that it is stuck before the system is reactivated.

The Ghost comes with an additional level of security that blocks common hacking methods used to gain entry to modern vehicles, such as relay attacks and key range extension. This is due to the fact that the Ghost system communicates in a quiet manner and does not emit signals that can be detected by thieves using codes or RF scanning technology.

The Ghost system also has a Service / Valet mode that allows your vehicle to be temporarily started and driven without the requirement of PIN codes. This is perfect if you are parking your vehicle and have to be away for a short period of time, such as for example to put groceries in the boot, or open a garage door, etc. The system will be able to exit service mode based on speed and time or via the simple PIN code entry procedure and give you assurance that only YOU can use your vehicle!

Keyless Entry

Many consumers are now seeking out additional security measures due to the rising trend of thefts from cars using contactless. This is particularly relevant for those who have invested time and money to customise their vehicle or own rare/expensive automobiles. An immobiliser add-on can be an effective way to avoid this type of theft as it can stop your vehicle from starting until the correct pin code is entered on your key fob.

Immobilisers are made to work with different vehicle circuits, including those that control starter motors and fuel pumps. They also can shut the car alarm to draw attention and scare off any potential thieves.

These devices communicate with the engine control unit (ECU) via the CAN data circuit and they stop thieves from trying to get around it by installing a brand new ECU or using an engine key programmer. These immobilisers are installed discreetly in your vehicle, leaving no marks and are totally invisible to the tools hi-tech thieves use.

The Ghost immobiliser differs from other systems that require the driver to carry tags or an app. Instead, you are able to select your personal pin sequence by pressing an image on your door, steering panel, and centre console. The pin can be changed as often as you want, which means it is as secure as a credit card. It can be more difficult to hack due to the fact that it requires up to 20 presses.

Ghost also comes with a Valet/Service mode, which allows you to disable it if you intend to hand over your vehicle for valet parking, or service. This allows the system to function within certain parameters, such as a 30-mph speed limit. The system can be activated using the original key or entry code.

Installed by our certified installers and certified installers, it is the most secure and efficient aftermarket CAN-immobiliser that is available. It is also fully accepted by Thatcham for insurance purposes. The Ghost 2 immobiliser is also equipped with six QR fingerprint labels as well as an ISR contact card with your unique QR code and an emergency code that is secure which can be kept in the purse or wallet of your car.