What is a Ghost Immobiliser and Tracker?

An immobiliser is a device that stops your car from starting without the right key or fob. It can reduce your car insurance premium and also.

The ghost system makes use of the buttons in your vehicle's steering wheel, centre console or door panels to create a unique pin code sequence that you can change by thinking of it as being like the PIN for credit cards but more secure (up to 20 button presses). It is undetectable and works quietly on the CAN data network.

Easy to install

Ghost immobilisers is also known as a PIN code blocker, is a device installed on the engine of your car which stops it from being started if the PIN code is not entered correctly. It is not only easy-to-install but also tamper-proof and therefore a good choice for car owners in Bolton Rochdale.

The Ghost is an immobiliser for the CAN bus that protects your car better than anything else on the market today. It safeguards your vehicle from key-cloning and hacking (relay attacks) and also the theft of keys from your home. By blocking the engine it protects your vehicle from being targeted by hackers.

It is not detectable by sophisticated scanners and can't be deactivated with simple wire cutting. It is also inaccessible to professional thieves employing these methods, as it does not transmit signals that could easily be detected by diagnostic tools.

It utilizes the original buttons in your car (steering wheel, door panels or centre console) to generate a unique, changeable PIN code sequence that is only known to you. The code is entered using your smartphone, or a secret button on the Ghost device. It is impossible for anyone else to use this sequence except for you. This is why it works so well to deter criminals, as they are unable to escape without noticing them and alerting to their presence.

If you change your vehicle during the course of ownership, you can transfer the Ghost from one vehicle to another so provided that it is connected to a CAN bus that's compatible. It's a simple process that won't void your warranty, as it works on the CAN data network. You don't have to change your steering wheel or status indicators. The Ghost is a lot less expensive and simpler to install than wheel locks, tracking systems, or trackers.

No key-fobs or LED indications to give away the location of the vehicle.

Many of us consider our cars to be a source of pride and joy in our lives. With this in mind, it is not surprising that some will spend a considerable amount of money to keep it clean. It is important to keep our cars safe.

Unfortunately the criminals have become more bold and can hack into keyless entry systems that allow them to gain access to your vehicle even when the keys are in the ignition or even inside your home. These criminals can then utilize a relay device in order to clone your car's unique signal and start the engine without you knowing. While these vehicles are typically fitted with a tracker, it is possible to disable with a few tricks.

Autowatch have developed a ground-breaking solution to stop this, dubbed Ghost, the world's first aftermarket CAN bus immobiliser, which protects your car unlike any other available. It is TASSA (Tracker and Aftermarket Security Systems Association) certified, tested and insurance approved – meaning you could save money on your auto insurance.

This unique device has been designed in a way to be inaccessible to thieves. It uses the existing buttons in your dashboard and steering wheel to create a unique pin sequence that can be up to 20 digits long which is required to enter in order to start the engine. The system is not able to be detected by codes-grabbing or RF scanning. It can only be disarmed with a smartphone app or your key fob or two smartphones.

It is also silent and a burglar would not be able to tell that it was in your car. And, because it is connected to the CAN network, it can't be disconnected from the ECU.

Other features include a valet function that allows your vehicle to be started up temporarily to clean or service purposes, a PIN change function in the event that you forget your PIN and the maintenance and service mode to allow you to drive your car whenever you need it. The device can be installed in different locations in your vehicle. Our certified Ghost installers will install it so that there aren't any permanent marks on the interior of your car.

No RFID scanning or code-grabbing technology

The Ghost Immobiliser does not use codes-grabbing or RF scanning technology which is the primary method used by thieves to steal the key fobs and gain access to your car's computer to create an unlocked key for your car. Instead, it utilizes the buttons you already have in your steering wheel as well as dashboard to communicate with your car. It's therefore completely hidden and hardly noticeable, since it isn't visible. The Ghost works with the CAN data network in your vehicle, therefore there is no need for additional wiring.

It blocks anyone from getting your car started without a unique pin or smartphone authorization and you will never be left with an empty vehicle. This means that thieves who take your vehicle using relay theft, key cloning, or ECU swapping will not be able to start it and are more likely to leave your car alone.

A secret 'password' for buttons is created by combining the buttons already present on your steering wheel and dashboard that only you can identify (as using a PIN code on a bank card). The system will start the engine in service valet mode when you press. This mode will require a different PIN code, or you can use the Autowatch App to unlock it from your phone. The app can be used to lock or unlock your car. This lets you leave your car to be cleaned, or leave it without fearing that it will be stolen or that the wrong keys are inside it.

The Ghost is a discrete and cost-effective option to safeguard your vehicle from theft via contactless. It is TASSA approved and may reduce your insurance costs, so you can drive confidently knowing that your car's pride and joy is secure. The Ghost is suitable for a variety of different types of vehicles, including motorhomes and vans, so you can feel safe wherever you are. To request a free quote and installation of the Autowatch ghost immobiliser and tracker, call us today.

No extra wiring

The ghost immobiliser is placed directly in the vehicle, and is connected to the CAN data network. This is the reason it is so effective. The device doesn't need key fobs that are sold in the market however, instead it uses the buttons of your car steering wheel and dashboard to create an individual PIN sequence that is entered before the motor is able to begin. This sequence can be created as long or as short as you'd like and can contain numbers or letters. It's as secure as a standard credit card. It is also possible to change it at anytime.

It is important to note that unlike a wheel lock or other after - market tracker devices, ghost immobiliser tracker isn't thatcham-approved. However, due to how the device functions, it is TASSA acknowledged and accepted by many insurance companies as a security measure that helps lower the cost of your insurance.

It is a great option for those looking to keep their cars safe and secure while traveling abroad or for valet parking and service companies. The device can be set to Valet mode, which permits the driver to start the car and drive with parameters like a 30mph speed limit without needing to enter the pin code. The device can be deactivated and then fully reactivated upon returning to the car.

This feature is particularly beneficial for those who make use of their vehicles, such as valet or taxi drivers. This feature can be used by family members or friends to start your car while it's in the garage or is being cleaned. The Ghost can be activated by entering the PIN code once you're back in control of your car.

The Ghost is a tiny and fully sealed device that can be concealed in any part of your vehicle. Its small size also means there is no evidence of the device and it will not harm your vehicle in any way.