Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to safeguard cars from hacking or key cloning, is a small device that can be put in place without causing any damage to your vehicle. It stops you from starting your car unless you enter the correct sequence of buttons in your vehicle. It is similar to the mobile password.

Stop/Start

Ghost immobilisers prevent vehicles from being stolen by preventing the engine from running until it is issued the correct PIN code. This is done without altering the vehicle, and is undetectable by thieves. The unit is directly connected to the ECU via the CAN databus to lock a vehicle. This system is very similar to the one car manufacturers have been using in their cars for years However, thieves isn't able to add a key or utilize key relay technology to bypass it like they could with factory-installed systems.

A ghost immobiliser range rover can be fitted to any van, car motorhome, caravan, or bicycle that has an engine. It's compatible with all the popular brands of vehicles. The same system can also be used on electric vehicles. It is an excellent alternative to wheel clamps and steering wheel locks.

When the Ghost is activated it will stop all buttons in your car and prevent the ignition being started without a PIN code. You can enter the code by hand or using the Android or Apple app. If the wrong code is entered the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great deterrent, and when the vehicle isn't started the thief will move on to another area of.

The Ghost is a small, weatherproof device that can be hidden in the most difficult to access areas of your car. It is extremely easy to install with an average of 20-30 minutes per vehicle. It is also very easy to remove should you decide to switch your vehicle or give it away for service or valet parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognized by a number of insurance companies. It also features a secure emergency Pin Code Override, and a Service/Valet mode which can be activated by pressing a button in the app, or by using your key fob.

Disarm

Contrary to the mechanical devices, which are able to be removed and reinstalled, ghost immobilisers are concealed and integrated into the vehicle. They are virtually impossible to bypass or hack and, even if they are discovered, thieves cannot start the engine. Ghost immobilisers are able to prevent key cloning as well as devices spoofing signals and signal jamming. These are methods that thieves employ to gain access to vehicles that have standard immobilisers.

An immobiliser operates by sending a code to the ECU (electronic control unit). If a wrong code is received and the vehicle is not launched as the engine will not start up. Although it is possible to disable the ghost immobiliser with an application program, it is time-consuming and difficult. The software must be installed and used by an authorized installer.

The Ghost immobiliser, a tiny system, is hidden within the vehicle's wiring loom. It is not visible to the naked eye once installed. It will not show up on diagnostic systems, it does not have LED indicators, and it does not connect to the engine through the OBD port. It communicates in silence through the CAN data loop.

The system will prevent the vehicle from starting until it receives a user defined PIN code sequence. The PIN code is entered via buttons on the steering wheel or door panels, or on the centre console. This is a safer way to protect your car as it does not require the use of keys or a remote control.

In addition to this Ghost offers an option for service that can be activated using the application on your mobile phone. This allows you to give your keys to someone for servicing or valet parking without entering the disarm sequence.

You should not remove the system on your Ghost by yourself, regardless of whether it's in service mode. This could cause damage to the engine. It is recommended that you contact an TASSA certified installer who will be able to remove the system safely and correctly. Our latest GHOST II immobilisers also include the QR fingerprint stickers that is hidden in various locations of your vehicle. these are linked to our international security register - in the event that the system is removed and is sold on the black market, this will link it back to its original owner.

Anti-Hijack

The anti-hijack function is a very important feature of the Ghost Immobiliser 2. This system is a smart key that guards your car from thieves. If the ignition switch is turned to on and the vehicle remains stationary for a period of 30 seconds then the Ghost system will stop the engine and turn the warning lights on. This gives the driver or passengers time to press a secret security button (depending on the vehicle) before the system reactivates and the engine is once again allowed to begin.

The ghost immobiliser reviews system, unlike many competitors, uses a timer and controller unit which shuts down the valve that shuts off fuel after a set period of time. This happens even if the ignition remains on. The delay time interval must be long enough to allow the hijacked owner of the vehicle to drive away from the location of the robbery and sufficient distance from the vehicle that is stalled before the system can be activated.

The Ghost offers an additional level of security to prevent common hacking methods used to gain entry to modern vehicles like relay attacks and key range expanding. This is because the Ghost system communicates silently and doesn't emit any signals that could be detected by a thief using code grabbing or RF scanning technology.

The Ghost system also features the option of a Service/Valet mode that allows your vehicle to be temporarily started and driven without the need for an PIN code. This is a great option if you park your car and only need to leave it briefly for a few minutes, like to open the garage door or put groceries in the boot. The system will exit service mode depending on the speed and time or via the simple PIN code input process that gives you total peace of mind that only YOU are able to utilize your vehicle!

Keyless Entry

Many customers are looking for extra security measures due to the rising trend of car thefts using contactless technology. This is especially true for those who have put in time or money to personalize their vehicles and own expensive or rare vehicles. A supplementary immobiliser is an affordable method to stop this kind of theft because it will stop your vehicle from starting until the proper pin code is entered on your key fob.

Immobilisers are made to block various vehicle circuits such as those that control the starter motor and the fuel pump. They also have the capability of shutting off the car alarm in order to draw attention to and frighten away any potential thieves.

These devices communicate directly with the engine control unit through the CAN data network. They prevent the thief from bypassing it by installing a new ECU or by using key programmers. These immobilisers are installed discreetly in your vehicle, leaving no traces and are totally inaccessible to the tools high-tech thieves employ.

The Ghost immobiliser is unlike other systems that require drivers to carry a tag or an app. Instead, you can select your own pin sequence by pressing the pattern on your steering, door panel, and centre console. The pin can be changed as often as you like, meaning it's as secure as a credit card, and is even more difficult to hack due to the fact that it requires up to 20 press.

Ghost also has the option of a valet/service mode that allows you to deactivate the system when your vehicle will be handed over to valet parking or service and allows it to operate within set guidelines, such as 30mph speed limits, so you don't have to worry about your vehicle being driven recklessly. The system can be activated with the original key or corresponding entry code.

This makes it the most effective and secure aftermarket CAN-based immobiliser on the market, and is insurance-approved by Thatcham as an add-on to your vehicle when installed by one of our authorised installers. The Ghost 2 immobiliser comes with six QR fingerprint labels, as well as an ISR contact card that contains your unique QR codes, as well as an emergency code that is safe. They are all stored in your wallet or purse.