Door Handle Replacement

Door handles appear to be something minor however, if you don't like the way they look or are finding them difficult to use then it's time to replace them. With some patience, you can put in an entirely new handle in a short time.

Modern door handles are equipped with cover plates that conceal the screws for an attractive appearance. If the new handle doesn't already have them connected, you'll need to attach them separately.

Removing the Old Handle

The door handle is not just a decorative feature for your home It's also an element of security that allows you to lock and unlock your door. As time passes, the door handle may begin to lose its grip or feel loose. It could also appear aged and worn. This is an indication that it's time for a replacement.

One of the first signs that your door handle is in need of replacing is the fact that it is becoming difficult to operate. This is a serious issue because you won't be able to lock or unlock the door, which could put you and your family at risk.

It's also an excellent idea to replace the handle on your door when it's damaged or broken. A damaged or broken door handle can be extremely dangerous, particularly if your children or elderly family members are unable to open it and end up trapped inside. It's easy to replace a damaged handle on doors.

Most modern door handles are standard size and so they should fit any door. If you're not sure if the new door handle you are buying will work, take out the old one and measure its housing holes. This will help you buy the right aluminium door handles, visit the next post, handle.

The most straightforward method to take off the handle from your door is to unscrew it from the door. Usually you'll need a screwdriver. Some door handles have the cover plate, which conceals the mounting screws. You'll need to remove it to get to the screws. After removing the old handle, make a note of the way the spindle is attached. This will aid in aligning the new handle.

Alternately, you can take off the door handle by removing it from the latch mechanism. You can use a screwdriver for removing the door handle. However, you'll have to locate the tiny latch that is located on the edge cut piece. Once you've removed the latch, remove the handle from the strike plate and then remove the latch from the door edge.

The Strike Plate

When you replace the handle, you'll want to replace the latch plate that holds the hole that the door's latch is inserted into when it closes. The packaging that the new handles arrive in will have two different latch plates: either a rectangular or a circular one (see the above diagram that outlines the parts of the door handle). If your current latch plate is a rectangular shape, switch it out for the round one, so that the latch is able to hook into the strike plate in a manner that makes the handle more comfortable to operate.

The first step is to take off the screw holding the latch plate. The screws are often quite tight and require a bit of force to loosen them. If you can, it might be helpful to have another person assist with this part.

After the screws are removed the latch should slide out of the door with ease. If it's stuck or won't move using a nail file to scrape around the edges of the latch plate. This can sometimes free up the plate.

Now you can move on to preparing the new door strike plate to be installed. Screw the latch plate into the door jamb using the screws that came with your new window handles. Be careful not to over-tighten the screws, as this can damage the strike plate.

If you're unsure whether the latch plate is in its correct position, close and open the door to see if it latches and closes correctly. If not you'll have to adjust the strikeplate up or down, forward or back until the door closes correctly.

If the door still moves or jiggles, you might need to increase the size of your latch hole on the strike plate. This is more frequent for older doors, but can happen due to wear and tear hinge mortises that are too shallow or are not sized correctly for the latch, or due to a broken or damaged strike plate that is damaged or broken. If this is the case, use a metal filing instead of a chisel or hammer to adjust the strike plate.

Eliminating the Latch

The latch is the angled metal piece that slides through the hole on the inside edge of your door. The latch moves forward when you turn the handle. It also catches the door frame to ensure that the door is closed. If your double glazed door handles wobbles when you close it, an upgrade to the latch could be all you need to correct the issue.

The screws that secure the door latch are hard to spot however, you can put a screwdriver in an insignificant hole on the trim plate, and then pull the latch off. Once you've removed the trim plate, it should be easy to remove the latch as well as the bolts that keep the latch and spindle in place.

If the latch cannot be easily removed, use a paperclip or tool to take it off the handle mechanism. Place the item into the slot for the latch that is recessed, and gently twist it or jiggle until the that the latch and handle begin to split. You may have to do this several times before the latch is loose enough to allow it to be pulled out.

You should be able slide the new latch into its slot without problems after you have removed the old one. Make sure that the latch is positioned correctly in the slot and aligned with the screw chambers and then use the new screws to secure it to the strike plate and door frame.

Measure the existing backset (the distance between the center of the large hole in the door's front and the edge) before installing the new handle. Check that the latch size of the new double glazing handle matches the measurement.

If you are replacing the handle or latch or handle, or if the old lock cylinder has been damaged, then you'll need an entirely new one. If you're not replacing the locks however, a new latch will fit in your existing recess, and work with your current keys. Pick a latch that has rectangular cover plates that match your existing handles.

Removal of the Cover Plate

You can replace your old door handles with a new lever and rose design to improve the look of your house. You can purchase complete sets that include escutcheons, privacy adaptors and escutcheons.

To replace the door handle inside, remove the cover plate (or rose) that covers the screws and mechanism. Use a flathead to remove the plate. It may have an opening along one side or be held in place by a pin.

Once the cover plate is off, remove the screw that holds the interior double glazing handle in place and set it aside. You'll also want to remove the screws that are holding the latch and the plates inside and the latch plate, which can be done by loosening them with a Philips screwdriver. Remove the inner plates and latch from the door. Put them away.

Some doors don't have this gap. If yours isn't have a handle, you'll need to make a hole into the door. It's the same procedure for opening a locked door however you'll have to be extra careful not to harm the door's frame or frame.

After the holes are drilled after which you'll have to put in new screws for the door knob. Make sure you purchase the same size as the old ones, so that you do not end up with a handle that's too tight or too loose. Installing a new latch and strike rod is also necessary. These are not included in all door handle sets.

If you're looking for a quality replacement set of interior door handles look no further than the Amazon's Choice FAERSI two-piece chrome-finished handle set. It's a factory-fit product and has received hundreds of 5-star reviews. It's an excellent option to replace worn or damaged interior door hardware on your Chevy.