Sliding Patio Doors Repairs

Your sliding patio doors will let sunlight into your home and increase the efficiency of your home's energy usage. However, as time passes, they can show signs of wear and tear that require some attention.

Luckily, the majority of issues with sliding patio doors are fairly easy to fix. Find out how you can keep your sliding patio doors looking and working like new.

Tracks that are damaged or dirty Tracks

One of the most common causes of sliding patio doors that don't open is dirty or blocked tracks. Over time, the dust and grime of everyday usage accumulates on the tracks and can cause the door to become jammed or even collapse completely.

Regularly cleaning sliding doors and their tracks in your household chores can help minimize this build-up. Begin by brushing or vacuuming any big debris from the tracks, and then wiping them down with warm water and a non-abrasive cleaner, such as dish soap. Adding a bit of vinegar to your cleaning solution may also help remove stubborn grease and dirt staining.

If you notice that your sliding door still won't move smoothly after completing these steps, it could be the sign of more severe damage and requires a professional repair or replacement. But, there are easy fixes you can try before calling in the professionals to prevent costly repairs or replacements.

It is essential to put a doormat at the bottom of your sliding doors in order to catch dirt before it can get to the tracks. Also, you should cut back any bushes or plants near your sliding doors to reduce the amount of debris trapped in the tracks. Close the door correctly to avoid damaging the rollers and wheels. By keeping your doors clean and lubricated you can extend their lifespan significantly.

Misaligned Rollers

Occasionally the sliding patio door becomes unbalanced or becomes stuck. This usually happens due to dirt, or other obstructions that can be easily removed. However, it could also be due to a bent track or roller. In the latter case, you may be able to re-align the roller by extracting them with the adjustment screws and cleaning them using rubbing alcohol. Be cautious because these parts are fragile.

If your doors are stuck, you can apply lubrication to the rollers. This will reduce friction and allow them to slide more easily. It is recommended to apply a silicone-based lubricant since petroleum-based ones tend to draw dirt more quickly. It is important to clean the tracks and rollers prior to lubricating.

After cleaning the rollers, you can put them back in place using their adjustment screws. Make use of the same lubricant you used to clean them. Make sure you push the rollers completely into their channels before reinstalling them. Then, you can test your door to determine if it now slides smoothly.

If the issue persists, it may be necessary to remove the door and inspect the tracks and rollers. If the rollers or tracks are badly bent they might need to be replaced. It is best to engage a professional to install the rollers or tracks in this case.

Warped Glass

sliding patio door repair service glass door are great to bring the outdoors into a room and letting in natural light but they could also be vulnerable to damage that requires repair or replacement. Cracks, warping, and fading are some of the most frequently encountered issues. Warping happens when the materials which make up your sliding glass patio door start to degrade as a result of exposure to sun, heat and other environmental factors. Cracks are usually caused by impacts, such as a lawnmower or ball smacking into the door. Fading typically occurs due to repeated exposure to sunlight and other elements.

If you have sliding glass patio doors that are hard to open and close it could be an indication that the tracks and rollers aren't working correctly. This issue could be caused by the accumulation of dirt or rust in the track or wheels or a lack or lubrication. Cleaning the tracks and rollers by removing obstructions, and then applying silicone spray may help solve this issue.

Another reason that sliding patio doors might be difficult to open or close is because the locking mechanism is no longer working. It could be caused by misalignment, wear and tear, or the combination of both. To fix this, simply adjust the locking mechanism by turning the hidden adjustment screws located at the bottom.

Drafts or air leaks around your sliding patio doors are a typical issue that can greatly decrease their energy efficiency. These issues are typically caused by weather stripping that has worn out or poor door alignment. This can be easily fixed by replacing the weather stripping and realigning your doors.

Loose Handle

It can be quite frustrating when the handle of a sliding door becomes loose. It makes it difficult to open. The reason for this is an improperly aligned lock mechanism. It can be fixed by loosening and tightening the screws that hold it in the correct position.

A loose handle may result from the handle breaking off from the spindle connecting it to the interior or handles on the outside. This can be due to a variety of factors including excessive use, wear and tear, or simply general ageing. If the problem is not resolved promptly, it may eventually result in the whole handle becoming loose and eventually falling off completely.

To fix this problem it is necessary to locate the screws that connect the handles' exterior and interior. They are typically hidden by tabs made of plastic that can be removed with a flathead screwdriver (or in the case of some handle styles, a Phillips-head screwdriver). It's a good idea to store these screws somewhere safe so that you don't lose them.

After removing the old handles, the next step will be to take off the spindle. You can do this by pounding the ends of the spindle using a hammer until it is removed from its place within the door. The new handle is fitted by placing the spindle into the hole for the handle inside and the other end through the hole in the handle on the outside. After the handle is installed then tighten it by screwing back the screws and then check to ensure that the lock and unlock mechanism functions properly.

Afflicted Weatherstripping

Weatherstripping that is damaged or cracked may allow water and air to be able to seep into your repairing patio doors door, compromising your home's comfort and energy efficiency. It can allow moisture in and create drafts that will increase the cost of cooling and heating. The good news is that replacing the weatherstripping is a simple fix that doesn't require any professional help. First, you need to take off the old stripping by loosing its staples with the help of a screwdriver or by pinning it gently with the help of a putty knife before taking it away from the door. Clean the area, and apply a layer of weatherstripping that is backed with a foam seal. This will prevent leaks and improve the comfort.

If your sliding patio doors aren't working as they should, it's important to fix the issue as soon as possible to avoid any further damage and ensure they remain functional for a long time to come. Depending on how severe the problem is and the severity of the issue, an DIY solution or a repair/replacement by a professional may be the best choice.

The most frequent issues that arise with sliding patio door glass repair near me doors are dirty rollers from debris in the tracks, wheels that are not aligned and a loose handle. In the majority of cases, these issues can be fixed with regular maintenance and cleaning, including fluidizing the track and rollers, as well as adjusting them and tightening the hardware. However, if these measures aren't working, it's best consult a professional for advice to ensure that your patio door is functioning exactly as it should. Check the warranty information before you decide to replace or repair your patio door. This will save you money in the future on repairs and replacements.