5kW Multi Fuel Stove

This is a fantastic stove with its clean lines and modern design. This model is Defra-exempt, Eco Design-2022-compliant, and has a great efficiency rating for the season. It will require fewer logs to produce the same heat output.

This multi fuel stove made of steel offers a generous view of the fire and has an airwash system that keeps it clean. It is rated as high of efficiency and is exempt from smoke control zones.

Heat output

A 5kW stove is the best choice for a small or medium sized living space. It can burn wood and smokeless fuels, and provide enough warmth to keep you warm in the colder months. Our range of multi-fuel stoves are DEFRA approved. They are available in a variety of styles from contemporary to traditional with cast iron or steel. If you're looking for a huge view window or an airwash system that will stop soot accumulation, we have the stove for you.

The efficiency of stoves is determined by the size of the firebox and the amount of wood that can be burned within it at one time. It is also influenced by how dry the wood is since moisture can reduce its efficiency. Therefore, it is essential to select only dried and well-seasoned cheap wood burning stoves.

It is important to think about the degree to which your home is insulated and aerated before choosing the best wood-burning stove for your home. If you choose an appliance with a heating output that is too high for your space it could cause the room to overheat and cause damage to its internal components. If you select one that generates less heat than required, your home will not be warm enough and may require additional heat sources such as electric heaters and radiators.

Our team of experienced installers will provide advice on the spot on the heating capacity of a stove to suit your needs and the best kind of fuel to use to maximize efficiency. This is based upon industry calculations, and an educated opinion we have accumulated over a long period of experience and thousands of installations.

A good rule of thumb is to try and ensure that your stove can maintain a temperature of 21degC during a cold winter day. This means that the stove should be able to generate five kW when it is functioning at its full capacity. This is a rough guideline and there are a myriad of factors to consider when choosing the ideal stove for your home, such as:

Materials for burning

Logs are a great place to begin. Dry, well-seasoned wood is recommended for the most out of your stove and prevent dampness and staining of the glass window.

A multi-fuel stove can be used with a range of different fuels including peat, logs, and anthracite. You will need to check with your stove fitter that the particular stove you are buying is compatible with the fuel you wish to use it for. Certain regions of the UK are designated as smoke control zones in which it is unlawful to use wood-burning stoves unless they are fitted with an authorised smokeless fuel burner.

You can also add more fuel to your fire with a multi-fuel fireplace. This is a great option for those who don't want to dedicate the time or space to collect firewood. Add a few pieces anthracite or other fuels that are smokeless to the embers of your log burner to help reignite and maintain the flames.

When using a wood burner, it's important to keep the grate spotless and clean out the ash pan on a regular basis. This will ensure that your stove runs at its maximum efficiency.

Burn only quality fuels that are appropriate for your stove. Wood that is not of high quality can create smoky air, unhealthy air and damage your stove. Only burn well-seasoned wood, not a fresh or newly cut logs.

You can also buy a multi-fuel stove that is designed to be used with gas. These stoves are often referred to as balanced flue stoves and are suitable for new-build properties which have been sealed and do not have traditional chimneys made of masonry. These stoves use twin flue pipes. One pipe ejects hot gases from the stove, while another pipe pulls fresh air in to ensure that the flow is balanced.

Installation

If you're seeking a stove that can be put in a smaller room you should consider a stove with 5kw of heat output. This size stove is cheaper than the larger ones, but still has enough heat to most rooms. It's important that you buy a stove that's the right size for your room. The stoves that are too big can be too hot, or they may not be able to achieve their maximum heat potential.

A wood stove must be fitted by a HETAS-registered installer, as this guarantees that all of the work is done in accordance with building codes. This includes the installation of the hearth, creating a chimney, and constructing a flue or liner. The installer will ensure that the space around the stove is sufficient to comply with all building regulations. These include 150mm clearance to the sides and the rear of the stove as well as 225mm in the front of the firebox. Check the manufacturer's brochure for more information about these requirements.

The Stovax Stockton Widescreen stove is a beautiful stove which will look great in any home. It has a simple, classic design and is suitable for most kinds of interiors. Its cast iron door gives it a timeless look and the large viewing window provides spectacular views of the flames. It features an air-washing system that is powerful to keep the windows clean.

If you have a larger room, then you may be interested in a twin wall flue system. This allows you to build a fireplace through an exterior wall. It is a great option to a traditional one. It can be used with a variety of different appliances and is easy to put in.

If you are installing a brand new stove, it will also be necessary to install the chimney's new breast unless you intend to keep the opening that is already in place. The cost of installation will depend on the materials and the size of the hearth and the amount of work needed to construct a chimney. Hiring an HETAS registered engineer will save you money in the long-term.

Safety

It is important to follow the basic safety precautions when installing a multi-fuel stove or log burner at home. These are essential to ensure the smooth operation of your log burner and that it doesn't become an fire hazard. It is recommended to install a fireguard on the stove, particularly when you have children. You should never operate a gas stove while under the influence of. These substances can hinder your coordination and concentration which could lead to an accident.

When you light a new fire in your multi fuel stove, it is crucial to open the air vents to their full extent to allow the most oxygen possible into the flames. This will allow the fire catch fire quicker, and will also increase the output of heat from the stove. The vents for air must be shut once the fire is lit to cut down the flow of oxygen and stop the flames burning through materials that are combustible in the fireplace.

Based on the type of fuel you are using, it may be necessary to alter the air vents over the duration of the fire. Wood requires a constant supply of air to be able to burn effectively and coal requires less. The temperature of the stove should also be controlled, as high temperatures can harm the stove's structure by releasing creosote. It is important to follow the instructions in the user manual of your stove, and to keep it within its operating temperature.

You can also install heat shields to reduce the clearance required from burning combustibles in the vicinity of your stove. They are readily available at many hardware stores, and are typically made of thick galvanised metal to provide the greatest security. They can be installed behind your stove, and reduce the minimum distance from combustible materials to 150mm on the sides and rear and 225mm at the front. This will ensure that your stove is safe to use and also conforms to specifications of the manufacturer and building regulations.