Replacement Handles For UPVC Windows

UPVC window handles are available in different designs, but they all have the same locking mechanism. To replace a uPVC handle, first remove the top screw from the base of the window handle which will reveal two more screws.

Then, take a measurement of the spindle length to ensure that the new handle is a suitable replacement. It's crucial to know the type of handle you have since there are numerous sizes.

Inline Espagnolette Handles

The majority of double-glazed windows feature Espagnolette handles which operate multi-point locks to increase security. The handle is controlled by a 7mm square spindle that connects to a gearbox within the window frame. The gearbox rotates the multi-lock mushroom when the handle is turned. They are available in a variety of designs including cranked, inline, key locking and cockspur handles and they can also be provided as sets to replace the handle that has been broken or worn out.

Our uPVC replacement handle kits are designed to make it simple to replace a damaged or faulty window handle made of espagnolette. These uPVC handles include all the fixing screws and a variety of spindle sizes that will work for the majority of applications. These handles also come with key-plugs that allow them to be switched from standard open/closed handles to fire escape or egress locking handles (if when used with the correct key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another alternative is our Yale Sparta 2 Inline Espag Handle that has been designed to be minimally intrusive with a reduced base height. It is part of the suited range of hardware. It is available in a range of finishes, all of which conform to the specifications of BS EN 1670:2007 Grade 5 corrosion resistance. They have also been tested for endurance and are suitable for use in coastal areas and with acidic timbers. They can be used with cylinder-immobiliser inserts to lock keys when required.

Cockspur Handles

Cockspur handles, which are commonly found on older uPVC or replacement handles for upvc windows aluminium windows and doors, are a simple latch-and-catch arrangement. The handle's nose is connected to or placed into the catch, which is a wedge block made of plastic, which is attached to the window replacements frame. The wedges are available in different sizes, so it is crucial to determine the step height you need before buying a replacement handle. As a general rule windows made of uPVC tend to utilize a 21mm step and aluminium frames usually have a 9mm handle step.

The handle of the cockspur is lockable with a key, adding security to your home. The lock is installed into the handle with an appropriate spindle that fits in the hole in the handle (also known as a backset). The spindle is 7mm square and can be used to open or close the window.

It is crucial to ensure that the new cockspur handle is the same height as the original. Usually, this measurement is taken from the base of the spur on the handle to the underside of the nose of the handle. This measurement can be referred to as the stack height or the backset. It is crucial to know this information before ordering any handle.

Cockspur handles are available as straight/universal, cranked or leftor right-handed models. This allows the handles to be placed on the right or left opening windows and gives the operator more ease of use.

Make sure your window has a restrictor. This is designed to stop the handle from being opened beyond a certain level. These are usually required for high-rise flats or commercial structures for safety reasons. Most domestic homes don't require these.

There are many different styles and shades of cockspur handles including stainless steel and white uPVC steel. The best cockspur handle for your windows depends on your style and preference and how you want your window to work.

Tilt and Turn Handles

Tilt and turn handles are a very popular type of handle, which is typically seen on double-glazed windows in the UK. They are found on both timber and upvc windows. The handle can be turned at any angle, even 180 degrees. This lets the window be opened fully into the room and can also be lowered for ventilation. The handle is locked in this position, and requires keys to unlock the handle when it is required to open it.

This type of handle is very simple to replace, having just one handle instead of a number of smaller ones. This improves the appearance of the handle, and is more in line with modern minimalistic design trends. In addition to this they are also much easier to clean than casement windows, because the window opens up inwards and can be cleaned on both sides.

Another advantage of tilt and turn windows is that they are between 4 and 8 times stronger than casement windows. This makes them ideal for larger windows and doors. The frames also have a steel core which adds durability and strength.

The tilt and turn mechanism is safer than a casement window, as the handle can be locked at any angle. This is especially crucial in areas where children may reside, as it will keep them from accidentally opening the window.

Tilt and turn windows are a common option for a lot of homes, as they can be utilized in various ways. They can be opened horizontally like a regular window, dropped down in a hopper-style for ventilation or tilted inwards to allow for cleaning and maintenance. This is an excellent option for those who want to increase airflow and reduce the sound in their home. Glass is easily removed and easy to clean and maintain. They are available in various sizes and colors. These windows are ideal for any home, and complement both modern and traditional styles.

Crank Handles

Crank handles are easy to operate and offer an excellent view of the outside, without obscuring the glass. These handles are commonly used on casement windows that are hinged on the side or awning windows. They feature an mechanism similar to a window bar and linkage arm, that is used to support the window sash. The window sash opens or closes when you crank the handle clockwise. Unlike other types of handles that are geared towards windows, a crank window's mechanism and handle are often subjected to significant wear and tear that can cause the gears to strip and the handle to cease functioning or fall off the operator shaft. Inspecting both the crank handle and the operator mechanism regularly will ensure that they remain in good condition for many years to come.

A crank handle is an arm made of metal that is attached to a rotating shaft that is perpendicular. The arm is operated manually by gripping it and turning it in a circular direction, much like you would use a pencil sharpener. In certain instances, the handle may be leg-operated.

The base of the crank handle is hollow. It's this hollow that allows it to connect to machinery and equipment. The handle's arm also has a connecting rod, Replacement Handles For UPVC Windows which converts the circular motion the handle into a rotary or reciprocating motion, which is used to operate equipment and machines.

Boats are typically transported on trailers using crank handles, as well as adjusting equipment and machinery. They are typically made of stainless steel that is resistant to corrosion in marine environments. Due to this, the majority of boat crank handles are powder coated to protect them from damage and to make them easier to clean.

If your crank handle isn't functioning or isn't opening the window, it may be time to replace it. Before doing so, look for the trim mounting screws within the window frame's screen track. If there aren't any, you can use a rigid putty blade to open the cover by sliding it between the window jambs and the frame. If this doesn't work, then you can remove the cover and open the crank mechanism by unscrewing the screws on the window frame.