Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to rust or rot.

It is essential to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. You should take the time to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace, and they typically fit into frames of the past easily. However, if you have double glazed window repair pane windows that are secured by internal beading it will be more difficult to take out the existing panes and install new ones. In this situation it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window repair near me frame.

If you plan to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you start working on the glass to ensure that any shards fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the distance between the window and the door is large, you might prefer a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sliding. A sagging uPVC window can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to stop the issue from worsening.

Repositioning the hinges could aid in fixing a window which is sliding. You'll first need to open the windows so you can access the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you have repositioned your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it can also be due to the mechanism of the handle wearing out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. You'll first need to close the window and perform an experiment fitting. The corner joints of the sash need to be aligned with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then turn the mechanism back into its original position.

3. Water Leaks

It is important to take action if you wake up every morning to find a smoky wall and floors that are wet. The leaks of water through windows could cause structural damage to your home and hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any DIY expert. Based on the severity of the issue the old caulking might need to be removed before a new layer of caulk can be applied. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens in an ease. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and Repairs to uPVC Windows tear over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier to do with someone else to help you hold the frame up.

Check that the uPVC hinges are closed and open in the proper direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The issue can be caused by opening the window incorrectly or a faulty installation in the factory. This issue can be fixed by sending us a photograph via our website and we will be more than happy to give you suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. The ideal time to do this at least once a year. WD40 and other solvent-based oils are not recommended because they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different causes. The hinges can also be unbalanced due to wear, Repairs to uPVC Windows causing a gap where the sash meets frame. If they're beyond repair, it could be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, can be misaligned. Again, it may be possible to give them a thorough clean, however in some cases it might be necessary to get them replaced.

These seals can wear down or be damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures, and also reduce the risk of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are usually fabric tubes which are filled with a kind of filler. They can be put on top of your windowsill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repair windows made of upvc will continue to provide a great level of security and insulation for your home. It is essential to remember that all windows eventually get worn out and it may be cheaper to replace them than to repair them. If you encounter any issues with your window made of upvc you should consult an expert as soon as you can.