Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If windows with double panes are held together by internal beading, it will be harder to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor, where they could be trampled.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and repair the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is large, Repairs to uPVC Windows you may think about a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, with time, they are susceptible to a range of problems including sagging. A sagging window in upvc windows repair could cause issues with light, draughts, and even security. It's important to take action when you realize that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window which is sagging. To accomplish this, you'll have to open the window to access the frame. Then, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and check for fit. If you're satisfied with the fit, tighten the screws to ensure that they remain in the right place.

If you cannot reposition the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity over time, which causes them to lose their tightness. If this happens, it's essential to replace the seal as quickly as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles may also become loose. The majority of the time this is due to screws that have become loose over time. However, it can also happen because the handle mechanism has worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need to shut the window and perform a test fitting. The corner joints of the sash must align with the casing joint. If it does not, you can use the screwdriver to loosen the handle. Then turn the mechanism to position.

3. Water Leaks

It is important to take action if you wake up every morning to discover mouldy walls and wet floors. The leaks of water from windows do can not only cause degradation of your home's structure but also hamper your efforts to regulate the temperature inside your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or not present.

This is a fairly simple fix that can be done by any DIY expert. Based on the severity of the problem the caulking used previously may require removal before a new layer is applied. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you might have to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. It is also possible to be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze It could be the hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is essentially a very simple process, but it's easier if you have someone to assist in holding the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a certain manner or Repairs to uPVC Windows because of improper installation in the factory. Sending us a picture via our website will often resolve the problem. We are always happy to give advice.

It is also important to grease the hinges regularly. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also decreases the risk of a window sticking and help prevent corrosion. This should be done at least every year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges can also be misaligned due to wear, causing a gap between the frame and sash. These can be easily repaired by giving them a good clean, but if they are beyond repair it may be necessary to have them realigned or replaced. In addition, the interlock could be misaligned. This is located on the hinge's side and may need to be cleaned. In certain instances it might be necessary to replace them.

The seals may wear out or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the risk of draughts.

Another, and most effective methods to reduce draughts is by using an draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be positioned on the top of your windowsill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is crucial to recognize that windows last for a certain period of time and there may come an point at which it is more economical to replace them than repair them. So, if you're experiencing problems with your upvc windows, it's recommended to seek help from a professional immediately.