Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home and even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. If you have double-paned windows which are held together by internal beading, it will be more difficult to remove and replace the old panes. In this situation, you will need to source some plastic spacers that will aid the new pane in being able to fit perfectly into the frame of the window.

If you are going to try to remove the window panes by yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric and not on the floor which could cause them to be trampled.

Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap between the door and the window is significant, you may prefer a security screen that also includes an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. Over time, they can be affected by a variety of issues such as sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need to open the window to access the frame. After that, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you are happy with the size of the window, tighten the screws to secure them in the right position.

If you are unable to reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen. This is usually due to screws that have become undone over time, but it can be caused by the handle mechanism wears out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and perform an initial test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue is, old caulking might need to be removed. When it comes to uPVC repair, you must avoid 'over-caulking'. This will make your window more difficult to clean and decrease its energy efficiency.

Make sure that the drainage holes do not have debris in them, and also that the sill pan is angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to remember that if the leak is coming from between the glass in your double glazing windows repairs glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily corrected by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it opens with an ease. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's very simple to change the hinges on a window, but it's easier if someone else helps you hold the frame.

Make sure that the upvc windows repairs near me hinges are closed and open in the correct direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should be opened.

The issue could be caused by opening the window improperly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be pleased to offer you advice.

It is also important to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. This should be done at least once a year. WD40 and other solvent based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. First, the hinges because of wear and Repairs to uPVC Windows tear, may become displaced, which will cause an opening to appear where the sash meets the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. Secondly the interlock, this is located on the hinge side of the window, can be misaligned. Again, it may be possible to just give them a thorough clean, however in certain cases, it may be necessary to have these replaced.

The next common reason for draughts is window seals. These are susceptible to being worn out or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and again will lessen draughts.

Lastly, one of the most effective ways to reduce draughts is by using an draught excluder. These are usually fabric tubes filled with some type of filler. They can be put on the windowsill on top. They can keep your home warm by blocking cold air.

Your windows made of upvc will keep providing excellent insulation and security in your home with a little regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and there may come a point where it is more economical to replace them than fix them. If you encounter any issues with your window made of upvc it is recommended to speak with an expert immediately.