Ghost 2 Immobiliser Problems

The autowatch ghost 2 immobiliser 2 immobiliser, designed to guard cars against key cloning or hacking is a discreet device which can be installed without damaging your vehicle. It stops you from starting your car unless you have entered the correct sequence of keys in your vehicle. It is similar to a mobile password.

Stop/Start

Ghost immobilisers stop vehicles from being stolen by stopping the engine from running until it has received the correct PIN code. This is done without modifying the vehicle, and is largely undetectable by thieves. The unit communicates directly with the ECU through the CAN databus in order to disable the vehicle. This is the same system the one used by car makers for a long time. However, thieves cannot overcome it using a brand new key or key relay technology, like they can with factory fitted systems.

Ghost Ghost can be fitted to any vehicle, van, motorhome, caravan or bike with an engine. It is compatible with all major brands of vehicles. The same system can also be used on electric cars. It's an excellent alternative to wheel clamps and steering wheel locks.

When the Ghost is armed it will block all the buttons in your vehicle and stop the ignition from starting without a PIN code having been entered first. You can enter the code manually or via the Android or Apple app. If the incorrect code is entered, the app will display an indicator light. The Ghost will then refuse to let the vehicle to start again. This is a great deterrent and if the vehicle can't be started, the burglar will then move on to a different area of.

The Ghost is a small, weatherproof device that is able to be hidden away in the most difficult to access areas of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also easy to take off if you decide to change vehicles, or give it to the valet or service center parking. It is a TASSA (Tracking and Aftermarket Security Systems Association), insurance approved system, which is recognized by certain insurance companies. It also features an emergency security feature that is secured by Pin Code Override, and a Service/Valet mode that can be activated by pressing a button in the app or by using your key fob.

Disarm

Contrary to the mechanical devices, which are able to be removed Ghost immobilisers are hidden and integrated into the vehicle. They are nearly impossible to bypass or hack and, even if they are found, a thief is unable to start the engine. This how much is a ghost immobiliser because a ghost immobiliser prevents key hacking, signal jamming and device spoofing, all of which are methods that are used frequently by thieves to gain entry into cars fitted with standard immobilisers.

An immobiliser operates by sending an instruction to the ECU (electronic control unit). If a wrong code is sent the vehicle will not be launched as the engine will not start up. While it is possible to disable the ghost immobiliser using a software tool it is lengthy and complicated. The software can only be installed and used by a authorized installer.

The Ghost immobiliser is a small system that sits within the wiring loom of the vehicle and is invisible to the naked eye after it has been installed. It will not show up on diagnostic systems, it does not have LED indicators and it does not communicate with the engine through the OBD port. It communicates silently through the CAN data loop.

The system won't allow the vehicle to start unless it receives an input PIN number that is specified by the user. This can be entered using buttons on the steering wheel and door panels as well as the central console. This is a more secure method to safeguard your car because it doesn't need the use of a remote or key fob.

In addition, Ghost also has the option of a service mode that can be activated by using the application on your mobile phone. This lets you hand over your keys to someone else for valet parking or service, without the need to enter an arm-disarm sequence.

No matter if your Ghost is in service mode or not, you should not attempt to remove the system on your own since it could impact the engine and cause damage. It is recommended to speak with an installer certified by TASSA who will safely and effectively remove the system. Our latest GHOST immobilisers have a specific fingerprint QR sticker that is hidden in various areas of your vehicle. These are linked to our security register. If the system is removed and later is sold on the blackmarket, this will allow you to trace the original owner.

Anti-Hijack

The anti-hijack feature is an essential feature of the Ghost Immobiliser 2. This system works like smart keys and is among the most secure ways to ensure your car is safe from theft. The Ghost system will automatically switch on the hazard lights and stop the car's engine when the ignition is switched on and the vehicle is in a stationary position. This allows the driver and passengers enough time to press the secure button before the system can be activated.

In contrast to other systems that simply stall the engine whenever the ignition is switched to on and on, the Ghost system has a unique controller and timer that will close the fuel cut-off valve 14 in the event that it is activated within an agreed-upon time even when the ignition is turned on! This delay period must be sufficient to allow the person who was hijacked to get away, and be a sufficient distance from the stalled car before the system is reactivated.

In addition to the standard CANbus immobiliser blocking features of the Ghost system, it comes with an additional security feature that blocks common methods of hacking used to gain access to modern vehicles like relay attacks key range extending, key range hacking and ECU swapping. This is because the Ghost system communicates in a quiet manner and doesn't emit any signals that could be picked up by thieves using codes or RF scanning technology.

The Ghost system features the valet or service mode that allows your vehicle to be temporarily started and driven without the need for PIN code. This is perfect when you park your vehicle and have to leave it for a brief amount of time, for example to put items in the boot, open a garage door. The system will end service mode depending on the speed and time or through the simple PIN code entry procedure, giving you complete security knowing that only YOU are able to utilize your vehicle!

Keyless Entry

With the rise of contactless car theft Many customers are seeking out additional security options. This is especially relevant for those who have invested time and money to customise their vehicle or own rare/expensive cars. Immobilisers with add-ons can be an effective way to prevent this type of theft since they prevent your vehicle from starting until correct pin code has been entered, along with your key fob.

Immobilisers are made to block the various circuits in a vehicle, including those that control the starter motor and fuel pump. They also can shut down the car alarm to draw attention and scare off any potential thieves.

These devices connect directly to the engine control unit using the CAN data network. They stop the thief from gaining access to it by installing a new ECU or using key programmers. These immobilisers are installed discreetly in your vehicle, leaving no trace and are totally invisible to the tools high-tech thieves employ.

The ghost immobiliser installer immobiliser is different from other systems that require drivers to carry a tag or an app. Instead, you can choose your personal pin sequence by pressing the pattern on your steering, door panel, and centre console. The pin can easily be changed to make the device as secure as a credit card. It is also more difficult to break since it requires as many as 20 presses.

Ghost also offers a Valet/Service mode that allows you to disable the system when your vehicle is to be turned over for valet parking or for service which allows it to operate within set parameters such as 30mph speed limits which means you don't need to worry about your vehicle being driven at a reckless speed. It is then reactivated with the original key or corresponding entry code.

This makes it the most efficient and secure aftermarket CAN-based immobiliser on the market and is fully insurance approved by Thatcham as an accessory to your vehicle when installed by one of our authorised installers. The Ghost 2 immobiliser is also provided with six QR fingerprint labels and an ISR contact card that contains your unique QR code and a secure emergency code, all of which are kept in your purse or wallet of your car.