Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance, it is necessary to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any shards fall onto the fabric instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will stop drafts and water from getting into your property until a professional arrives to fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is large, you might be interested in a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. Over time, they can be affected by a variety of issues that include sliding. A sagging window in upvc window repairs near me can cause problems with light, draughts and even security. It's important to take action immediately if you notice your uPVC windows are sagging.

Repositioning the hinges can help fix a window repairs near me that is sliding. You'll first need to open the windows so you can access the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in place.

If you are unable to reposition the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and dry out, which causes them to loosen. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows are waterproof and draught-proof.

uPVC handles could also become loose. This is usually due to screws that have become undone over time, but it could also be caused by the handle mechanism wearing out. It's relatively easy to fix a loose uPVC handle. First, you'll need close the window and then perform an initial test fit. The joint at the corner of the sash should be aligned with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains, it's important to take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or is missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on how severe the issue is, the old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them, and also that the sill pan is properly angled to allow the water to drain from the window. In more severe situations, you may have to replace the window.

Mold spots and rotted sills are other signs of water leakage. This mold thrives in damp environments and can quickly spread across the house.

If the leakage occurs between the double glazed window repairs-glazed window, it is more likely the problem is with the seal than the frame. It is also possible to be corrected by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your upvc window repairs near me windows are brittle to open, or loose and blow open with a breeze, it may be the hinges that are at fault. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Like any mechanical component, hinges can be damaged over time. It is essentially a very simple procedure, but it is simpler when you have a person to help you hold the frame in place.

It is also important to ensure that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should open.

The problem can be caused by opening the window incorrectly or by a poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be pleased to offer you advice.

Regularly lubricating the hinges is essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. This must be done at a minimum every year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. First, the hinges because of wear and tear, can become misaligned, this causes an opening to appear where the sash meets the frame. This can be easily repaired by giving them a thorough clean, however in the event that they are beyond repair it may be necessary to get them aligned or replaced. In addition, the interlock could be unbalanced. This happens on the hinge side and may need to be cleaned. In some cases, it may be necessary to replace the hinges.

These seals can wear down or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. They can keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. However, it is important to recognise that all windows have a life span and there may come an point at which it is more cost-effective to replace them rather than repair them. If you are having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as possible.