UPVC Window Handle Replacement

Replacing a damaged window handle is a relatively easy task and with the right tools it can be done quickly. It is essential to know what kind of handle you have as well as the size of its spindle before you purchase a double glazing replacement window.

Older uPVC windows have cockspur window handles which have a spur that protrudes to secure a wedge-shaped cockspur striker plate. These can be either left or right-handed and need to be matched when replacing.

What kind of lock and handle do I need?

There are many kinds of window handles made from upvc and locks, each with their own benefits and purposes. The type of handle that you have will determine if the locking mechanism you have is effective and if it's easy to open the windows. As time passes, and with regular use the upvc handles that are on your windows may be damaged and worn out. This makes them less secure and less effective. In some cases they may even fall completely off. It is important to repair your window replacements near me handles made of upvc immediately if you begin to notice they are falling off. This will help prevent burglaries and will keep your home safe.

It's an easy task that virtually anyone can perform. With just a few tools and the right information it's a straightforward procedure that shouldn't take less than a few minutes. To get started you must determine the type of lock and handle you have on your window and then identify the best replacement.

Inline Espagnolette Handles

They are typically found on the side of the window. They are flat and have a latch which engages the locking mechanism of the window frame. Inline upvc handles have a spindle running through the middle of the handle to the window frame to control the latch.

Cockspur Handles

They are usually found on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles are held to the window frame by only one screw and are less secure than other types of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other upvc handles because they can be rotated to open the window and then lowered into the window replacement glass near me to allow air circulation. They feature a 7mm spindle on the back and are available in left and right-handed versions.

It is essential to know the spindle's size prior to purchasing a replacement upvc handle. Not all are exactly the same size. Drop something into the middle of the hole to test the length. This is the largest spindle size that will fit your windows.

What is the spindle?

uPVC window handles operate in a similar way as doors, with the user turning the handle to operate an opening inside the frame. The latch opens the window, so that it can be opened and closed. However, in some cases, these handles can become damaged, particularly if they are regularly used or exposed to harsh weather conditions. You may have to replace the handles on your uPVC window if they are not operating correctly.

There are many different types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. They are designed in a variety of ways to fit into uPVC frames. Each handle type utilizes an entirely different spindle for locking the window mechanism. This is why it is crucial to identify the type of handle is installed on your uPVC window to get the correct replacement windows and doors for it.

You can check what type of uPVC handle you are using by looking at the base section of your handle. There should be a "snap in cover over one screw which holds the handle base in place. Remove this and then you should be able to see the second screw on the opposite side of the base of the handle. Once both screws have been removed, you should be able take the handle out of the uPVC.

Once you have removed your uPVC window handle you need to carefully unscrew the spindle that was previously attached to the locking mechanism. Note the length of the spindle. You will need to buy a replacement upvc window handles of the same length as the handle that was originally used and the locking device.

The spindle wears out and becomes inoperable with the locking mechanism. This could be due wear and tear from continuous use or loosening of the locking mechanism, or even corrosion over time. If this happens, you'll have to replace both the window handle and locking mechanism to restore the full functionality of your uPVC Windows.

How do I get rid of the handle from the previous one?

Through time and regular use, window handles can become damaged or broken, and if this happens, it is essential to fix them as soon as you can to ensure the security of your home. It is simple to replace a damaged or worn handle. The job can be completed in less than a minute without the need for any special tools.

The first step to remove the handle that was previously used is to remove the screw that is located at the top of the handle base. Once the screw is removed, the handle will be removed from the base. There is a second screw that is located at the bottom of the handle's base, and this can be removed as well. After these two screws have been removed, the handle can be removed from the base of the window.

After removing the old handle and align the fixing holes of the new handle with the holes already present in the window frame. There may be a little sticker or caps on the new handle, so remove them if needed and then put the handle in place. Once the handle is in place it is crucial to verify that it works by turning the handle and making sure that the lock mechanism activates.

Espag handles feature spindles that protrude from the handle and slot into the multipoint locking mechanism on the frame of the window. Cadenza windows come with a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over either the outer frame or the transom bar cross member within the window.

Once you have the new handle in place, insert the spindle into the lock inside the window and then tighten it down. Replace the snap-in cover and screw cap (if appropriate) after the handle is securely fixed. Now that the handle is in use, simply open and close the window a few times to ensure it works correctly and securely.

How do I fit the new handle?

Changing your uPVC window handle isn't difficult and the process is quite simple. All you need is a screwdriver and a bit of patience. The first step is to ensure that the old handle is locked and then remove any screws that are visible, you can also replace them with screw caps if required. After you have removed the handle, you'll need to take note of the length of spindle that extends from the back. This is crucial since it will determine the kind of handle that you will need to purchase.

Espagnolette handles made of uPVC are the most popular kind of handle. The spindle is inserted into the handle to control the locking mechanism within the frame of the window. The handle opens the latch and allows the window to open. During regular use and over time, handles made of espagnolette can be damaged.

Cadenza handles are a second type of uPVC window handle commonly used on tilt and turn windows. They feature a protruding blade that operates a multiple-point locking mechanism within the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. You can replace them using the same method as you would with espagnolette handles, but make sure the new handle is not angled and flat.

Once you've decided on the correct handle to purchase, you can simply align the new handle with the screw holes, and then screw it into the appropriate position. You should then put the screws back on and verify that your new handle is operating properly. This is accomplished by moving the handle from the locked to the unlocked position and vice versa several times. If you have any issues, it may be worth contacting a specialist to see if they are able to assist in resolving the issue. They will often be able to guide you on the best way to solve the issue in a quick and effective manner.