Cat flaps allow your pet to go in and out at their own pace, without needing to let them in or out. They also can help stop your cat from peeing in the home.

It is much easier to put the cat flap on a Upvc panel than one made of glass but you'll need some skills and the correct tools.

Measure the Door

Installing a cat flap on a door can be tricky but as long as you choose the right type of cat flap, take your time and follow the steps provided it should not prove to be a problem. We will demonstrate how to draw the shape using an jigsaw to cut out the door's area. Then we will finish the job by attaching the cat flap. This will ensure that the flap stays in place and shields the door from wind and cat flap in upvc Door panel rain causing damage.

The first thing to do is determine the width of your pet to get a precise measurement of what size of cat flap you'll require. This will ensure that the flap is big enough to let your pet go inside and out of the house without having to open and close the door each time, but also small enough to prevent them from moving too far in either direction.

If your kit comes with a drawing showing where to drill, you can place it on the door, and then draw a pencil around it. If your door has a sill or moulding at the bottom, make sure you leave enough space between your cat and the moulding or sill.

Then put on your eye protection and a dust mask, and using a jigsaw start cutting along the line that you have pencilled in. Don't push the blade too hard, as this could make it cut faster than you would like it to. If you own a square that you have cut, make use of it to verify that you're cutting properly and also to ensure that the hole is a good rectangle shape, once you are satisfied with this you can start to remove the rest of the door material.

Draw a Line

The cat flap lets you to let your pet go inside and out without having to worry about unwanted visitors or unwanted gifts. It also prevents draughts, and helps to keep your home's temperature stable. Fitting a cat flap to your door may seem daunting for those who haven't attempted it before. Many people call a professional joiner or carpenter to do the work. While this is definitely an option, it is possible to do the work yourself if you have the proper tools and follow instructions carefully.

This is much easier to do with doors made of wood, however it is possible with uPVC. However you should be cautious not to harm the doors with cat flap since this could cause the door to be damaged and invalidate your warranty. The first step in the process is to measure the door and ensure that it is able to fit the new cat flap. This should be easy enough if you are using an ordinary upvc door panels with cat flap door, but you might need to take more care if you have an insulated or composite type of door since these can be more difficult to cut into than solid uPVC panels.

The next step is to measure the size of your cat's belly. This is the measurement from the floor to the lower part of the cat's stomach, cat flap in upvc door panel and you'll need locate a place on the door where this measurement is within the range that your cat is able to comfortably walk through. Once you know this, you will need to mark out the area with an eraser and a spirit level so that you can ensure that the hole you will make will be suitable for your cat.

Once you've marked the area, it's time to cut out the hole. You will need to use a jigsaw and it is important that you take your time to ensure that the cuts are smooth and straight instead of uneven and rough, since it could cause damage to your door. Be sure to wear safety glasses and a dust mask when using the jigsaw, as dust from the saw can be dangerous to your health. After you've cut the hole, you will require sandpaper for smoothing the edges so that the cat flap can be easily inserted.

Make a hole

Installing a cat flap in upvc door panel (http://www.nzdao.cn/home.php?mod=space&uid=584138) flap to an existing door panel or double glazing sealed unit can be difficult. It is tempting to tackle the task yourself, but unless you have experience in DIY it is likely to be best to have a professional to do the job for you. A mistake could not only be unsightly, but also pose security risks. It could allow cold air in when the cat is outdoors and hot air out when the cat is inside.

The first thing you need to do is mark the position of the hole in the door using a pencil and an ax level. This will ensure that it is located and is in a straight line with the other parts of the door. It is important to have a piece of sandpaper at hand to smooth any edges.

Wear any safety equipment you require when working with a power tool. If you're concerned about the noise, you can buy a cordless jigsaw which is more quiet and easy to use.

It is crucial to only remove the material needed to make the cat flap. A little bit of extra material will be needed to cover the thickness of the the flap, but cutting off more than this can cause problems and even cause damage to the door frame.

A door made of upvc could have a metal frame or panel within it that will interfere with the microchip cat flap, and if this is the case you'll need to make an oversize hole to ensure the metal does not come into contact with the wall of the cat flap. If this is done it is crucial to fill in the oversize gap and render it watertight.

If you're looking to install a cat flaps for french doors flap into windows made of double-glazed or upvc with frames made of metal you'll need to talk to a specialist. They will provide you with a new piece of glass with the hole already made for the window cat flap flap. This will be less expensive than trying to fit a cat flap inside an existing pane of glass that was not designed specifically for this purpose.

Install the Flap

Cat flaps give your pet the freedom to come and go anytime they want, allowing them to relax in the house when they like. If you've got an uPVC door, it may be difficult to fit an animal flap, especially if you don't own a glass pane that can be cut to accommodate one. Luckily, if you're happy to purchase and install a replacement half-glazed uPVC panel then it is possible to add an animal flap onto the doors. It's not as simple as cutting a hole in the door though and there are a few things you'll need first to ensure it's secure.

A composite, uPVC or GRP door panel is generally made up of a plastic skin that is bonded to an insulating polystyrene base. It is essential to be careful when cutting the material. This type door comes with a template that you can use to cut the hole.

After you have carved out the hole in your front door, it is time to put in the cat flap. You can buy and fit a wide variety of different models including basic button operated ones to ones that are activated by microchips that only let in your pet. However, no matter what kind of cat flap you select, it's important to make sure that your cat can comfortably use the flap without getting trapped in the weather.

A circular fitting is superior than a square because circles can be cut more securely into the glass. It's because square holes are more likely to crack the glass when they are drilled. This is also a safer choice since you don't have to drill into the toughened glass that could break and cause harm to your pet or family members. This is particularly crucial if you have a child or an elderly person living in your home who may be injured by shards glass.