Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. They do not rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to take the time to make sure that you're doing everything you can to keep your windows in good repair.

Single-pane windows are relatively easy to replace, and they generally fit into frames that were previously in use very easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this situation it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.

If you're planning to attempt to remove the window panes yourself it is crucial to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric and not on the floor which could cause them to be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will keep water and drafts from entering your home until a professional is able to fix the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is large, you may be interested in the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows so you can access the frame. Then, you can remove the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having repositioned your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loose their elasticity. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. Often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. The first step is to close the window and perform a test fit. The corners of the sash need to be aligned with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and damp walls each time it rains, Repairs to uPVC Windows it is important that you take action. Windows that leak water do are not just a cause for degrading of the structure of your home but also hinder your efforts to control the temperature within your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is damaged or is missing.

This is an easy fix that can be done by any DIYer who is competent. Depending on the severity of the issue the old caulking might need to be removed before a new layer of caulk can be applied. When it is time to uPVC repair, it is important to avoid 'over-caulking'. This can make your window harder to clean and decrease its energy efficiency.

Check that any drainage holes do not have debris inside them and ensure that the sill pan is properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double glazed window repair-glazed window, it is more likely that the problem is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or it opens with a breeze. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Like any mechanical component, hinges can be damaged over time. It's very simple to change the hinges on a window, but it's simpler if you have someone to help you hold the frame.

Make sure that the uPVC hinges are open and closed in the proper direction. This can be done by looking for the arrows on each hinge. This indicates which way the window should open.

The problem can be caused either by opening the window improperly or a faulty installation at the factory. This issue can be fixed by sending us a photo via our website and we will be pleased to offer you advice.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window operate and close more smoothly. It also decreases the risk of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent-based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges may also become misaligned due to wear, which can cause an opening where the sash meets frame. These can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, can also become misaligned, again it's possible to just give them a clean but in some cases it might be necessary to have these replaced.

The next most common reason for draughts are the window seals, these are prone to wear or damaged over time, and allow air to escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease the possibility of draughts.

One of the most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric which are filled with a kind of filler. They can be placed on the windowsill on top. These will keep your home warm by blocking out cold air.

With a little maintenance and repair windows made of upvc will provide an excellent level of security and insulation for your home. It is crucial to realize that all windows have a life span and they may reach the point when it's more cost-effective to replace them rather than fix them. If you have any problems with your Upvc window, it's best to consult an expert as soon as you can.