Repairing UPVC Windows

uPVC Windows are a great choice for your home. They help keep the heat inside your home in winter and cool air outside in the summer. However, they can get damaged due to a variety of causes and need repairs.

It's good to know that repairing windows made of upvc is not as hard as you may think. The most common problems include damaged handles and hinges that are squeaky.

Squeaky Hinges

uPVC is a fantastic choice for modern homes since it's strong, durable and requires little maintenance. These windows also have a number benefits for repairing windows homeowners, including thermal insulation and sound insulation. If you're thinking of installing windows like these in your home, it is important to be aware of the possible problems that can occur at times.

One of the most frequent problems uPVC windows can face is noisy hinges. This problem occurs when the window sash moves against the frame when it is opened and closed. This is usually caused by a build-up of dirt, residue and rust that make it difficult for the window's wheels to shift smoothly. This problem can usually be solved by spraying WD-40 High Performance Silicone Lubricant on the hinges.

This lubricant will help the sash move against the frame without difficulty and will stop the whistling noise that can occur when this happens. However, if the problem is due to something more serious, it may be best to consult an experienced double glazing window installation service who can offer you the replacement for your defective window.

Draughts are another problem that can occur with uPVC windows. There are often hollow spaces that allow air to pass between the window frame and the aperture. This can happen during windy days. This could lead to heat loss and an increase in your energy costs, which is why it's important to ensure that your uPVC windows can form a tight seal when they're shut.

You should also regularly clean your uPVC window. You should clean them four to eight time a year using a white, soft cloth that is soaked in warm soapy water. Avoid cleaning them in direct sunlight to avoid streaky glass. If you're using a cleaner make sure it doesn't contain any dyes as this can make a stain on the uPVC.

If you're looking to put in new uPVC windows or replace the existing ones Oridow can assist you to find the ideal solution for your property. Our technicians can advise you on which type of uPVC is the best choice for your home, and answer any questions that you may have.

Broken Handles

With time and regular use window handles can become damaged or broken. This can be a gruelling issue, especially if it makes it difficult to open the window. If your window handles are no longer working properly, it's important to address the issue as soon as you can. This will ensure that your windows are safe and you are able to open them with ease.

If your window handle is broken it's an easy fix to replace the part that causes it to work. It's a relatively affordable fix, and is worth considering in the event that the handle no longer performs as it should. It is important to ensure that the new handle is compatible with your window design and lock mechanism but this should be easy enough to accomplish.

A square drive spindle that is within the window handle could have shifted out of place. It's easy to fix this issue, but you must make use of the right tool. Make sure you don't use a power tool, as this could damage the handle or the window frame. Instead, use a screwdriver that is hand-held because it is more comfortable to hold and less likely cause damage.

Another issue that can be found is that the shoot bolt (espag gear) is not connecting with the handle gearbox. If you're experiencing this issue, it's a good idea to contact a professional window repair specialist so that the issue can be addressed before any further water ingress occurs.

This issue can be fixed by repositioning the shoot bolt. To do this you need to insert an angle-right wrench into the gap between your window frame and glass. Move the tool towards the point where the roller cam is likely to be, and then gently pull it toward the handle to see if you are able to connect the roller cam. If this doesn't work, the shoot bolt is likely detached from the gearbox for the handle and needs to be replaced. You can buy an additional shoot bolt at most hardware stores.

Damaged Frames

UPVC is one of the most popular materials used in window frames because it is durable and energy efficient. It is also low maintenance. However in time, UPVC can suffer damage that requires to be repaired. Some of the most frequent repairs include a damaged frame or sill leaky seals and damaged handles. Repairs are typically simple however the cost can vary dependent on the size of the window and type of repair required.

uPVC frames are prone to wear and tear from the elements and everyday wear. The UPVC surface can become scratched or discoloured. This can happen by using a harsh cleaner on the window or by accidentally dropping something heavy on the frame. It's important to fix this as soon as possible to avoid scratch marks and blemishes from permanent ruining the appearance of your home.

Wood is also a material used for window frames, but it can suffer from similar issues to UPVC. To avoid this you should apply regular wood protection to the frames and sills of your windows. If you notice that the wood is rotting, this will lead to air drafts or leaks entering the window. You can determine if the wood is rotting by putting an object with a screwdriver and observing if it easily gets into.

It is possible to repair some of the sashes and frames made of wood, but it can be a challenge when the rot has progressed substantially. This may mean that the sash or frame, repairing windows will need to be completely replaced.

A wooden frame is more likely than UPVC to split or crack over time because of moisture and heat causing it to expand and contract. This can result in holes and gaps in the frame, which need to be filled with filler. To guard the wood from moisture and prolong its lifespan, it's important to get it professionally stained or treated.

Difficulty opening the window

Upvc windows are a fantastic alternative for your home since they last longer and require less maintenance and provide good insulation. However this doesn't mean they are invincible to issues. Many issues can be resolved without the need for a professional.

If you're finding that your window is hard to open, it may be due to a stuck or jammed handle. If this is the case, try to loosen it manually. If this does not work you can try using a prybar. Put the block in the frame's front for leverage. Slowly push the bar upwards. This will allow the shoot bolts and roller cams to return to the open position. Repeat this process until you can fully open the window.

Another reason windows can be difficult to open, is because it has become stuck against the frame. This could happen if the frame has been damaged or has been painted unevenly. In this case, you'll need to remove both the window sash as well as the rope that connects it. You will then need to clean both the frame and the sash and use an utility knife or hand sander to smooth any rough spots.

The rubber gasket may also be a problem. If the seal is worn out, it allows cold air to enter the house and warm air to escape, causing an increase in heating costs. To avoid this you must replace the seal. This is a simple task you can perform yourself.

Maintaining your uPVC window in a proper manner is the key to avoiding common problems. Cleaning your frames regularly using an anti-smear glass cleaner is important, as it will prevent the build-up of dirt and grime which can make the handles stiff and the hinges rattle. It is also recommended that you lubricate the external-moving parts of the window regularly. This can be accomplished using a solvent PVC cleaner like WD-40. It is also important to check regularly that the drain holes and vents do not get blocked.