How to Fit a Ghost Immobiliser

Are you looking for a reliable method to protect your vehicle from being stolen? Ghost immobilisers are an excellent solution. They operate quietly, and they're incredibly hard to spot.

They are not detected by radio signals, diagnostics or diagnostics. They communicate with the ECU through the data loop of CAN. Therefore, they are impossible to bypass by thieves using key relay technology or cloning.

The Ghost Immobiliser has been approved by TASSA for insurance purposes

The Autowatch Ghost immobiliser is a verified TASSA system that helps to protect your vehicle from theft. It works by connecting to the CAN data network and then entering the unique PIN code via buttons from the factory on your steering wheel or dashboard. It stops the engine from starting unless the correct code is entered. It can also disable the starter motor, and shut down components like the fuel pump, so thieves aren't able to steal your vehicle.

A Ghost immobiliser that has been verified by TASSA is a cost-effective method to safeguard your vehicle. It also helps protect against signal relay attacks, which are typical methods employed by thieves to take cars. It also helps reduce insurance premiums by up to 20%. Apart from being effective against hackers the device is also discrete and can't be detected by potential thieves. It is compatible with many vehicles and makes it an excellent alternative for Birmingham drivers who want to secure their vehicles.

It's easy to install and doesn't require cutting wires or the installation of new key fobs. Instead it connects to your vehicle's data network and sends inputs to the ECU. This makes it difficult for thieves to insert new key fobs to replace the ECU. The Ghost emits no radio signals and does not use diagnostics. This makes it undetectable by scanners.

The Autowatch Ghost is the most advanced vehicle immobiliser currently on the market, and can assist in preventing theft of your vehicle. It is a highly efficient system that sends an encrypted signal to ECU and prevents the vehicle from starting if the correct pin is not entered. It can be programmed to any degree, so you can change the PIN at any time you want. It also has an Anti-Hijack mode to prevent cloning devices and jamming signals.

You can also link the Ghost to a tracker to safeguard your vehicle from theft and other crimes. The tracking system will show the location of your vehicle in real-time, and allow you to report any suspicious activity to the police. The tracker can also be helpful to locate your vehicle if it was stolen or vandalized.

It's easy to find the right size

Ghost systems can directly communicate with the ECU of your car, in contrast to a standard factory-fitted immobiliser that relies on a chip in your key fob. It is completely undetectable by hi-tech diagnostic tools, and it does not rely on radio signals. It disables the vehicle's fuel system or starter motor, which will stop it from being started.

This will also prevent the ECU accepting any new codes that are entered via the OBD port. This will stop thieves from putting in new key fobs or replacing the ECU to take your joy and pride away.

It's impossible to break or get around it Ghost system since there aren't any wires visible or physical security equipment. This is the reason why it's such an efficient method to keep your car secure and safe.

The Autowatch ghost immobiliser install system connects to the CAN in your car and is programmed with a unique PIN code that has to be entered in order for the J to be driven. The system is undetectable to high-tech thieves. There are no LED indications, it is silent and operates through the buttons in your car like those on the steering wheel and door panel as well as the centre console.

A full demonstration of the system is performed by an Tassa Registered Ghost Installations team member before you leave with your Owner's Guide and Emergency Card, as well as two Autowatch Window Stickers as well as an Installation Certificate and Security Guarantee. The system can be turned off to allow valet parking and servicing, then quickly activated when the vehicle is parked.

It's low maintenance

The Ghost Immobiliser is an aftermarket security system that can be installed in various vehicles. It is simpler to install since it doesn't require any additional sensors or keyfobs.

It also requires less maintenance than a GPS tracker since it doesn't send radio frequency signals like a traditional GPS. This means that thieves are unable to identify the Ghost immobiliser with RF scanning technology or code grabbing. The system is based on the CAN network, and therefore cannot be altered using standard tools. It is only disarmed by using the correct PIN code.

A criminal will need know the unique sequence of disarming of your Ghost immobiliser in order to drive your vehicle away. It will comprise several button presses on the steering wheel, door panels or centre console. This makes it very difficult for them to figure out what you'll press and will prevent the vehicle from starting.

The Ghost Immobiliser also uses a smart phonetag' that is attached to your keys. It communicates via Bluetooth with the base unit of your car. The tag can be programmed to disarm at any moment by the user. It is activated via an app on your phone when you are within range of your car. You can also activate the system by calling the app to find your vehicle. The app will show the vehicle identification number that is used to protect your car from theft.

The Ghost immobiliser is also a great choice for those who regularly hand over their vehicle for valet parking or for servicing. Our team of installers will give a thorough demonstration of how the system works and will hand over owner's instructions, insurance certificates, and an Ghost emergency card on completion of the installation.

The Ghost immobiliser can be transferred to a different vehicle if the vehicle you own changes during the ownership period as long as it is compatible with the Ghost System. This is a great feature that gives you peace of mind if you decide to sell your car.

It's difficult to discern

A Ghost Immobiliser will stop thieves from getting your car started by requiring a unique PIN code that only you know. They will not be able to drive away with your joy and satisfaction and instead must physically remove the vehicle. It is possible to work with a car tracker to assist in tracking your vehicle. The device is concealed within the vehicle and does not emit any signals from radios or LED indicators, so it is unrecognisable to thieves. It is discrete and doesn't require additional wiring so it can be installed without causing any damage to your vehicle.

The device is hidden within the vehicle and operates by using the onboard CAN circuit. It communicates directly with the ECU of the vehicle and does not require any additional sensors or key-fobs in order to work. It can stop the criminal from bypassing the system by adding a new key or replacing the ECU since the system will not allow your vehicle to start if you do not enter the correct pin code.

This device was designed by Autowatch which is a South African technology leader. They are at the forefront of creating the latest security technologies and this product is a prime example. This system safeguards you from the latest technology for keyless contact that includes hacking, cloning, and key theft.

It is able to do this because it communicates with the ECU through the vehicle's databus. This makes it difficult to detect by RF scanning or code grabbing devices used by hi-tech thieves as the device is a silent operation that doesn't send any signals. It also makes use of the buttons inside your vehicle to enter a PIN code so it is not as prone to theft like traditional immobiliser relays.

This is a great way to improve your cars security and provide peace of mind when driving. It is a small price to pay to ensure you don't have to put your joy and pride through the agony of losing it. Contact us today to see how we can help protect your car by using our TASSA certified Ghost immobiliser.