Repairs to uPVC Windows

uPVC is a great choice for Repairs to uPVC Windows modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will reduce costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home, and could even be fatal. It is essential to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the frame that was previously installed easily. However If windows with repairing double glazed windows panes are secured by internal beading, it will be more difficult to remove the panes that are in place and replace them with new ones. In this situation, repairs to Upvc windows you will need to source some plastic spacers that help the new pane to fit perfectly into the window frame.

If you plan to try to remove the window panes yourself it is important to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any shards fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from getting into the property until a professional comes out and fix the window. It also acts as a barrier, deterring any intruders from gaining entry to your home. If the gap is large, you might want to consider using the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, with time, they can suffer from a variety of issues like sagging. A sagging uPVC window could cause issues with light, draughts, and even security. It is crucial to act when you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure they remain in position.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. It is essential to replace your seal as quickly as you can in order to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. You'll first need to close the window and do an experiment fitting. The corners of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is crucial to act if you get up each morning to find a smoky wall and floors that are wet. The leaks of water from windows do not only lead to the degradation of your home's structure but also hinder your efforts to control the temperature within your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be completed by any competent DIYer. Depending on the severity of the problem is, the old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and can decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more severe cases, you may need to replace the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread throughout the house.

It is also important to note that if the leakage originates from the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily fixed by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or it opens in an ease. Any competent DIYer can replace hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is essentially a very simple process, but it's simpler if you have someone to help hold the frame up.

Make sure that the uPVC hinges are closed and open in the correct direction. You can do this by checking for the arrows on each hinge, this indicates which way the window should open.

Faulty window hinges can be caused by incorrectly opening the window a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be more than happy to give you suggestions.

It is also crucial to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a great method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. Ideally, you should do this once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of various factors. Firstly the hinges, again because of wear and tear, could become misaligned. This can cause a gap to form where the sash meets the frame. These can be easily repaired by giving them a good cleaning, but in the event that they are beyond repair it could be necessary to have them realigned or replaced. The second is the interlock, which is on the hinge side of the window, can also be misaligned, and again it may be possible to just give them a clean but in some instances it could be necessary to have these replaced.

These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures, and reduce the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will help keep cold air out and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. It is crucial to realize that windows last for a certain period of time and there may come the point when it's more cost-effective to replace them rather than repair double glazing window them. If you have any problems with your window made of upvc it is recommended to speak with an expert immediately.