Door Handle replacement upvc door handles

Door handles may seem like a small detail, but if you dislike the style or design of them, or are finding them difficult to use then it's time to replace them. With a little patience, you can install a new handle in no time.

Modern door handles are usually equipped with cover plates which hide the screws, giving them an attractive appearance. If your new handle does not have them already attached, you will have to attach them separately.

Removing the old Handle

Door handles aren't just an an important aesthetic addition to your home but they're also crucial for safety as they let you lock and unlock your door. As time passes the upvc door handle handle could start to lose its grip or feel loose. It might be beginning to appear worn out and old. This is a sign that it's time to replace the door handle.

If your door handle is becoming difficult to use, it might be time to replace it. This is an issue because it means that you can no longer lock or unlock your door, which could be the risk of security for you and your family.

It is also recommended to replace your door handle when it's damaged or broken. A broken door handle is dangerous, especially for elderly or children members who struggle to open it. They could be trapped. It's easy to replace a damaged handle on doors.

The majority of modern door handles are standard size and therefore should fit any door. If you are not sure if the new door handle you are buying will work, remove the old one and measure its housing holes. This will allow you to purchase the right size door handle.

It is easiest to take off the old door handle by removing it from the door. Usually, a screwdriver is used. Some door handles have a cover plate which hides the screws that mount them. You will need to remove this to get to the screws. Once you've removed your old handle, make a note of how the spindle is positioned so that you can align it when you fit the new one.

You can also remove the door handle by removing the latch mechanism. This is usually done with the screwdriver, but you'll need to locate the small latch, which is located at the edge of the trim piece. After taking off the latch, remove the handle and strike plate. Then, remove the latch from the door's edge.

Removing the Strike Plate

You'll need to replace your latch plate after replacing the handle. This is the plate that holds the hole through which the latch for the door is inserted when the door closes. The new handles will have two latch plates which are a circular and a rectangular plate (see the image above which illustrates the components of a door handle). If you have an old rectangular latch plate, you can replace it with a round one. This will let the latch hook into the strike plate and make the handle more convenient.

The first step is to loosen the screw that is holding the latch plate in place. The screws are usually quite tight and require a lot of force to loosen them. It is helpful to get a second person to assist with this task if you can.

Once the screws are removed the latch should pull out of the door easily. If the latch plate is stuck or won't move use a small file to scrape the edges. This will sometimes free the plate up.

Now you can move on to preparing the new door strike plate for installation. Utilizing the wood screws that came with the new handles, screw the latch plate onto the inside of the doorjamb. Do not tighten the screws too much because this could damage the strike plate.

If you're not sure whether the latch plate is in the proper position Try closing and opening the door to check if it closes and latches correctly. If not then you'll need to adjust the strikeplate either up or down, forward or back until the door shuts correctly.

If the door continues to move or jiggles, you may have to enlarge your latch hole on the strike plate. This is more common in older bi-fold doors handles, however it can happen due to wear and tear, hinge mortises that are not deep enough or not the right size for the latch, or due to damage or a broken strike plate that is damaged or broken. If this is the case you can use a metal file instead of a chisel or hammer to adjust the strike plate.

Removal of the Latch

The latch is a curved metal piece which slides in and out of a hole in the inside of your door. When you turn the handle, it pushes the latch forward and allows you to open the door. It also connects to a hole in the frame of the door to keep your door closed. If your door shakes when you close it, an upgrade to the latch could be all you need to fix the issue.

The screws that hold the door latch are difficult to see however, you can put a screwdriver in an insignificant hole on the trim plate and then pry the latch off. After removing the trim plate, you will be able to pull off the latch, as well as the bolts that hold it and the spindle that holds it.

If the latch doesn't easily be released, try using an old-fashioned paper clip or tool to free it from the handle mechanism. Place the item in the latch's slot that is recessed and gently turn or jiggle it until you feel the latch and handle start to separate. It may take this several times before the latch is loose enough to pull out.

It should be possible to slide the new latch into its slot with no problems after you have removed the old one. Make use of the new screws to secure the latch to the strike plate or door frame. Make sure it's properly positioned in the slot, aligned with the screw chambers.

Check the backset of the current handle (the distance between the centre of the large hole on the front of the door and the edge) prior to installing the new handle. Also, ensure that the size of the latch on the new handle is in line with this measurement.

If you are replacing the latch or handle or handle, or if the old lock cylinder is damaged then you'll require an entirely new one. If you're not changing locks the new latch will fit in your existing recess, and work with your current keys. Be sure to choose an entry point with rectangular cover plates that match your handles.

Removing the Cover Plate

You can replace your old door handles with a contemporary rose and lever designs to improve the look of your house. You can purchase complete sets that include the appropriate escutcheons and privacy adjustor kits.

To replace an internal door handle take off the cover plate (or rose), which covers the screws and mechanism. Find an release tab on the plate, and employ a flathead screwdriver remove it from the knob. It could have an opening on one edge or be secured by a pin.

Remove the screw that holds the interior handle and put it aside after the cover plate has been removed. Remove the screws that hold both the inner and outer plates. You can loosen them by using a Philips Screwdriver. Then, remove the inner plates and latch plate from the door and put them aside.

Most doors have gaps between the jamb of the door and the inside edge of the frame that makes room for a handle, however not all do. If yours does not then you'll have to drill a hole into the door to accommodate the new upvc window handle replacement. The procedure for this is the same procedure opening a door using the lock, however you'll have to be extra careful not to damage the door or frame.

Installing new door knob screws is necessary after holes have been made. Choose the same size as your old screws to avoid getting the handle that is too loose or tight. It's also necessary to install an additional latch plate and strike rod that aren't included in most door handle sets.

Amazon's Choice FAERSI 2-piece chrome finish handle sets are a fantastic option if you're in need of a top-quality interior door handle replacement set. It's factory-fitted and has received hundreds of 5-star reviews. It's an excellent option for replacing worn out or damaged interior door hardware on your Chevy.