Ghost 2 Immobiliser Problems

Created to guard vehicles from key cloning and hacking to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that is able to be fitted without causing damage to your car. It prevents your vehicle from starting unless you enter the correct sequence of buttons within your vehicle, similar to a password on the phone.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by preventing the engine from starting until it is issued the correct PIN code. This is done without altering the vehicle, and is undetectable by thieves. The unit is directly connected to the ECU via the CAN databus to lock a vehicle. This system is very like the one automobile manufacturers have used in their cars for many years, however, the thief isn't able to add a key or utilize key relay technology to bypass it as they can with factory fitted systems.

Ghost is compatible with any vehicle with an engine, which includes motorhomes, vans, cars, caravans, and bikes. The same system is compatible with electric vehicles. It's an excellent alternative to wheel clamps and steering wheel locks.

When the Ghost is activated it will stop all buttons in your car, preventing the ignition from being started without a PIN code. You can enter the code manually or through the Android or Apple app. If the incorrect code is entered, the app will display an indicator light. The Ghost will then not allow the vehicle to start again. This is a great way to discourage thieves. If the vehicle cannot be started and they are unable to get it started, they will leave.

The Ghost is tiny, weatherproof device that can be concealed in the most difficult-to-access areas of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also simple to take off if you decide to switch vehicles, or give it to an auto repair shop or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association), insurance approved system, which is recognized by some insurers. It also features an emergency security feature that is secured by Pin Code Override, and a Service/Valet mode which can be activated by pressing a button within the app or by using your key fob.

Disarm

Ghost immobilisers are not mechanical anti-theft devices that can be removed, are hidden within the car. They are near impossible to hack or bypass and even if discovered, thieves cannot start the engine. This is because a ghost immobiliser blocks key blocking, signal jamming, and device spoofing, all of which are methods that are used frequently by thieves to gain access to vehicles that have standard immobilisers.

The immobiliser transmits a code to the ECU. If the wrong code is received and the vehicle doesn't start because the engine will not fire up. While it is possible to disable the ghost immobiliser by using software, this is very time-consuming and difficult. The software can only be installed and used by a authorized installer.

The Ghost immobiliser is a small device that is part of the vehicles wiring loom and is inaccessible to the naked eye after it has been installed. It is not visible on diagnostic systems, there aren't LED indicators and it does not communicate with the engine via the OBD port. It communicates without sound through the CAN data circuit.

The system won't allow the vehicle to start until it is given an input PIN code that is entered by the user. This is entered through buttons on the steering wheel and door panels as well as the central console. This is a safer method of protecting your vehicle as it does not require the use of a key fob or remote control.

Ghost also comes with a service mode that can be activated via the mobile application. This lets you give your keys to someone else for valet parking or service without having how to fit a ghost immobiliser enter an arm-disarm sequence.

It is not recommended to remove the system on your Ghost by yourself, regardless of whether it is in service mode. This could damage your engine. It is recommended to contact an installer certified by TASSA who will safely and properly remove the system. Our latest GHOST II immobilisers also include the QR fingerprint stickers that is hidden in various areas of your vehicle, these are linked to our international security register. In the event the system is removed and is sold on the black market, this will connect it back to the original owner.

Anti-Hijack

Ghost Immobiliser 2 has a highly effective anti-hijack function. This is a clever key that guards your car from theft. If the ignition switch is turned to on, and the car is stationary for 30 seconds then the Ghost system will automatically stall the engine and switch the hazard lights on. This gives the driver or passengers enough time to press a secret security button (depending on the vehicle) before the system is activated and the engine is again allowed to start.

The Ghost system, unlike many competitors, utilizes an electronic timer and controller that will close the valve for shut-off of fuel 14 after a set period of time. This is even if the ignition remains on. The delay period must be sufficient to allow the hijacked vehicle owner to leave the vehicle and stay a safe distance from the car that it is stuck before the system can be activated.

The Ghost offers an additional layer of security that blocks common hacking methods used to gain entry to modern vehicles like relay attacks and key range extending. The Ghost system communicates in a quiet way and does not emit signals that can be picked by a thief using code-grabbing technology or RF scanning.

The Ghost system also comes with the option of a Service/Valet mode that allows your vehicle to be temporarily started and driven without the need for PIN codes. This is great for parking your vehicle and have to be away for a short period of time, for instance, to put your items in the boot, open a garage door etc. The system will end the service mode according to the speed and duration or through the simple input of a PIN code process. This gives you complete security that only YOU are able to drive your vehicle!

Keyless Entry

With the rise of theft of cars using contactless technology Many customers are looking into extra security options. This is especially applicable to those who have put time or money into personalising their vehicles and own expensive or rare vehicles. Immobilisers with add-ons are a great way to deter this type of theft because they will stop your vehicle from starting until proper pin code is entered along with your key fob.

Immobilisers are designed to intercept the various circuits in a vehicle which include ones that control the starter motor and the fuel pump. They also are able to shut off the car alarm in order to draw attention and scare off any potential thieves.

These devices communicate directly with the engine control unit using the CAN data network. They prevent the thief from bypassing it by installing a replacement ECU or by using key programmers. These immobilisers are installed discretely inside your vehicle, leaving no trace and are completely invisible to the tools hi-tech thieves use.

In contrast to other systems that require a particular application, or a tag to be worn on the person of the driver the Ghost immobiliser is only disarmed by pressing a series of the existing electronic buttons on your steering wheel, door panel, and the centre console, which allows you to choose a personal pin sequence. The pin can easily be changed, making the device as secure as a bank card. It is also more difficult to hack because it requires up to 20 press.

Ghost also has a Valet/Service mode, which allows you to disable it if you plan to surrender your vehicle to valet parking, or service. This allows the system to operate within the parameters, such as a 30-mph speed limit. It can then be reactivated using the original key or the appropriate entry code.

Installed by our accredited installers, it is the most secure and efficient aftermarket CAN-immobiliser available. It is also fully accepted by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels and an ISR contact cards containing your unique QR codes, along with a secure emergency code. These are all kept in your purse or wallet.