Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. They don't rot or rust like timber and aluminum.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will help avoid unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are relatively easy to replace, and they typically fit into old frames very easily. However If you have double-pane windows that are secured by internal beading it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, you will need to locate some plastic spacers that aid the new pane in being able to fit correctly into the window frame.

If you're planning to try to remove the glass panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and eye protection. You should also lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor which could cause them to be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and drafts from getting into the property until a professional comes out and fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, upvc window Repairs durable and long-lasting alternative to timber sash windows. As time passes, they may develop a number of problems such as sagging. A sagging uPVC windows could cause issues with light, draughts, and even security. It's important to take action when you notice your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sliding. To accomplish this, you'll need open the window so that you can get to the frame. Then, using a screwdriver, you can take off the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and verify the fit. If you're satisfied with the fit, tighten the screws to ensure they remain in position.

If you are unable to move the hinges, you could have to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to lose tightness. If this happens, it's crucial to replace the seal as fast as possible so that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has been worn out. It's fairly simple to fix a loose uPVC hand. The first step is to close your window and do a test fit. The joint at the corners of the sash must align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's crucial to take action. Windows that leak water do can not only cause destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. Most of the time, uPVC emergency window repair leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on the severity of the problem the old caulking may require removal before a new layer is applied. It is important to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Make sure that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more extreme cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it is more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily corrected by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and open with a breeze, it may be hinges at the fault. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that have hinges and like any mechanical part they can wear down over time. Changing a window hinge is an easy process, but it's easier when you have a person to help you hold the frame in place.

Check that the uPVC hinges open and close in the right direction. This can be done by looking for the arrow on each hinge. This indicates which way the window should be opened.

The problem can be caused by opening the window incorrectly or a faulty installation at the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to give suggestions.

It is also crucial to lubricate the hinges regularly. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also stop corrosion and reduce the risk of sticking. Ideally, you should do this at least once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different things. The hinges can also be disaligned as a result of wear, which can cause an opening where the sash meets frame. These can be easily repaired by giving them thorough clean, however when they're beyond repair, it could be necessary to have them re-aligned or replaced. The interlock may also become misaligned. This is located on the hinge's side and could require to be cleaned. In certain instances, it may be necessary to replace these.

These seals can wear down or get damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass, this will help in regulating indoor temperatures and will reduce the risk of draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be positioned on top of your windowsill. These will help to keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repair, your upvc windows will continue to provide a great level of insulation and security for your home. It is important to remember that all windows will eventually wear out and it may be cheaper to replace them rather than repair them. So, if you're having issues with your upvc windows, it is best to seek professional assistance immediately.