Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. Unlike timber and aluminium, they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and upvc repair could even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However when windows with double panes are secured by internal beading, it'll be more difficult to remove the existing panes and install new ones. In this case, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you are going attempt to remove the window panes by yourself it is crucial to wear the proper safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth before you begin working on the glass so that any shards will fall on the fabric instead of onto the floor where they can be trodden under and cause further damage.

It's a great idea to tape the gap once the glass is removed. This will prevent drafts and water from getting into your home until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is large, you might think about an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a variety of issues that include sliding. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges can aid in fixing a window which is sagging. To do this, you'll need open the window to get to the frame. Then, using a screwdriver, you can remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and check for an appropriate fit. If you are happy with the size of the window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you could need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. It is essential to replace your seal as soon as you can to ensure that your uPVC window waterproof and draughtproof.

UPVC handles can also loosen up. Most often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's fairly simple to fix a loose upvc repairs hand. First, you'll need to shut the window and then perform a test fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it is important that you take action. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame has been damaged or missing.

This is a relatively easy fix that can be done by any DIY expert. Depending on how serious the issue is, old caulking may have to be removed. When it is time to uPVC repair, you should be careful not to over-caulk. This will make your window harder to clean and lower its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan is angled properly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily repaired by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it opens with the breeze. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they are susceptible to wear and tear over time. The process of replacing a hinge on a window is essentially a simple process, but it's easier with someone else to help you hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem with the hinges on windows could be the result of incorrectly opening the window in a particular manner or because of improper installation in the factory. It is usually possible to fix the issue by sending us a photo through our website and we will be more than happy to give you suggestions.

Regularly lubricating the hinges is essential. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can allow the window operate and close more smoothly. It can also prevent corrosion and reduce the risk of sticking. It is recommended to do this once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become unbalanced due to wear, which can cause a gap between the frame and sash. If they are damaged beyond repair, it might be necessary to have them realigned. Second, the interlock can be misaligned. This happens on the hinge side and may need to be cleaned. In certain instances, it may be necessary to replace these.

These seals can wear down or be damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to prevent draughts. Replace the windows made of Upvc with low-emissivity glass. This will help control indoor temperatures, and reduce the possibility of draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric filled with some kind of filler. They can be positioned on top of your windowsill. These will keep your home warm by blocking out cold air.

With a little maintenance and repair windows made of upvc will continue to provide excellent insulation and security for your home. It is important to remember that all windows will eventually become worn out, and it could be cheaper to replace them than to repair them. If you encounter any issues with your upvc window you should consult an expert immediately.