Replacement Handles For UPVC Windows

UPVC window handles come in various styles, however they all have the same locking mechanism. To replace a uPVC window handle, take off the top screw at the base of the handle. This will reveal two screws.

Next, measure the length of the spindle to ensure the new handle is a good replacement. It is important to determine what kind of handle you have because there are a variety of sizes.

Inline Espagnolette Handles

Espagnolette handles are present on most modern double glazed windows. They are equipped with multi-point locks that provide better security. They operate by virtue of a 7mm square spindle at the back of the handle, which connects to a gearbox located inside the window frame that moves multi-locks when turned. They are available in a variety of styles, including cockspur keys, inline and locking handles.

Our uPVC replacement handle kits are designed to make it easy to replace a damaged or defective window handle made of espagnolette. These uPVC handles come with all the necessary fixing screws and a variety of spindle sizes suitable for all applications. They are also available with key plugs that allow them to be transformed from normal open/close to fire escape and egress non-locking handles (if used in conjunction with the correct key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Yale Sparta Inline Espag Handle is another option. It has been designed to limit visual intrusion and has a reduced height at the base. It is part the suited hardware range and comes with a variety of finishes that comply with the requirements of BS EN1670 : 2007 Grade 5. They have been tested for durability and are suitable for use in acidic woods and coastal environments. They are compatible with key-locking inserts that cylinder-immobilise when needed.

Cockspur Handles

Most often found on older uPVC and aluminium windows, cockspur handles are a simple latch and catch arrangement. The handle nose is attached to or placed into the catch, which is a wedge block made of plastic, which is attached to the frame of the window. The wedges come in various sizes, so it is crucial to determine the step height you need before buying a replacement handles for upvc windows handle. As a rule, uPVC windows tend to have a step size of 21mm and aluminium frames usually have a 9mm handle step.

The handle of the cockspur is lockable with a key, providing security to your home. The lock is inserted into the handle with an appropriate spindle that fits in the hole of the handle (also called a backset). The spindle is 7mm square in cross-section and is used to open or close the window.

If you are replacing a handle for a cockspur, it is important to ensure that the replacement handle has the same step height as the original. Usually, this measurement is taken from the base of the spur on the handle to the underside of the nose of the handle. This measurement is sometimes called the stack height or backset. It is important to be aware of this before placing an order for any handle.

Cockspur handles can be straight/universal or cranked and are available in left hand or right handed versions. This allows the handles to be placed on the left or right opening window and gives the operator Replacement Handles For UPVC Windows more ease of use.

Check if your window needs a restrictor. This is designed to stop the handle from being opened beyond a certain level. Generally, they are required for high rise commercial or flats for safety reasons. The majority of homes do not require them.

There are a variety of different styles and colors for a the cockspur handle. These include brushed stainless steel and white uPVC. The best choice for your windows will depend on your personal tastes and style, as well as how you want the window to perform.

Handles that tilt and turn

Tilt and turn handles are a popular kind of handle which are commonly seen on double-glazed windows in the UK. They are found on both timber and upvc windows. The handle can be turned at any angle, including 180 degrees. This allows the window to be opened fully into the room, and it can also be lowered to allow for ventilation. The handle is locked into this position and requires an unlocking key whenever needed.

This type of handle is simple to replace, having just one handle instead of a number of smaller ones. This reduces the overall look of the handle and is more in line with the modern minimalistic design trends. In addition, they are much easier to clean than casement windows since the window is able to open inwards and is cleanable on both sides.

Another advantage of tilt and turn windows is that they are 4 to 8 times stronger than casement windows. This makes them perfect for larger windows as well as doors. The frames also have a steel core which increases the strength and durability.

The tilt and turn mechanism is safer than a casement window, as the handle can be locked at any angle. This is especially important in areas that have children as it keeps children from opening windows.

Many homes opt for tilt and turn windows as they can be used in various ways. They can be opened horizontally, just like windows that are regular, lowered down in a hopper-style for ventilation or tilted inwards for cleaning and maintenance. This is a great choice for those who wish to improve the airflow in their homes and can also help with noise reduction. The glass is easily removable, making them easy to clean and maintain. They are available in a variety of sizes and colors. They are ideal for any type of home and complement both modern and traditional styles.

Crank Handles

Crank handles are simple to operate and offer an excellent view of the outside without blocking the glass. They are typically used on casement windows hinged on the side or awning windows. They have an mechanism similar to a window bar and linkage arm, which supports the window sash. The window sash can be opened or closed when you turn the handle clockwise. The mechanism of the crank window unlike other handles is often subjected much wear and tear. This can cause the gears and handle to break or fall off the operator shaft. Monitoring the handle and operator mechanism regularly will ensure that they are in good working order for the years to come.

A crank handle is an electronic arm that is connected to a perpendicular rotating shaft. The handle is rotated in a circular motion by gripping and rotating it, similar to how you would operate a sharpener. In some applications the handle could be operated via a leg.

The base of the crank handle is hollow. It's this hole that allows it to be connected to equipment and machinery. The handle's arm is equipped with an attaching bar that transforms the circular motion of the handle into reciprocating and rotary motions to operate machines and equipment.

Boats are often loaded onto trailers with crank handles, as well as the adjusting equipment and machinery. They are typically made from stainless steel that is resistant to corrosion in marine environments. Most boat crank handles are powder coated to protect against damage and make them easier for cleaning.

If your crank handle has stopped working or won't open the window, it may be time to replace it. Before you do that, look for the trim mounting screws within the window frame's screen track. If there are none to be found, you can use a stiff putty blade to release the cover by sliding it between window jambs and the frame. If this doesn't work then you can take it off and open the crank by unbolting screws from the frame of the window.