How to Deal With Double Glazed Repair

It's a good idea to inspect your double-glazed windows regularly, especially if you observe that the frames are expanding or contracting. This can reduce the chance of drafts.

If you notice condensation appearing between the glass panes, it is possible that the seal be failing and should be replaced. Replacing the seal will not only reduce condensation, but also reduce energy costs.

Broken or cracked Panes

Double glazing is not indestructible and there are a few issues that can reduce the energy efficiency of the windows and doors. Repairing double glazing is a relatively easy process, however the right tools and expertise are required to make high-quality repairs. It is generally recommended to use a professional firm to perform the work rather than attempting it yourself.

A cracked or broken pane is the most frequent issue with double-glazed windows. It could be the result of a blow or knock on the frame from outside, repairing double glazing or from an attempt to open the window that is shut. The glass might break or crack into small pieces, based on the size of the crack and the force that is applied to it.

If windows with double glazing are susceptible to cracking it can be repaired by using a form of putty or a special tape. This will stop the crack from expanding or getting worse and also stop the elements of wind, water or other elements from entering your home through the cracks.

Another problem that is frequently encountered is condensation in double glazing. This is usually the result of a broken window seal. It is a natural process that occurs due to different temperatures and weather conditions, therefore it is important to check that your windows are under warranty before attempting to fix them.

Typically, this issue will be covered by the company you purchased your double glazing panels glazing from so it is essential to contact them immediately and clearly explain the issue. This should be written down instead of via text or phone. Always keep the original.

Drilling a hole into the middle of a misted pane is a common way to repair it yourself. The desiccant absorbs any moisture and aid in resolving the problem. This is a temporary solution and it is recommended you replace your double-glazed units with new ones as soon as you can.

Misted Panes

Double glazed windows that mist up can be a real nuisance and cause major disruptions to your home. Once you identify the cause it's fairly easy to fix. In most cases the problem is caused by a failure in the seals that separate your window panes. This allows moisture be able to get. This could be due to poor installation, drainage issues or even seals that are defective from the window manufacturer.

Standard sealed units are made up of two glass panes with a hollow spacer bar sandwiched between them (shown in the image above). The inner surface of the spacer bar has been perforated and the spacer bars are filled with desiccant in order to absorb moisture. The two glass panes will then be sealed together, and the entire unit will be injected with gas to improve its thermal efficiency.

As you can imagine, if a sealed unit fails, moisture can enter between the panes and this can create condensation and mist. This could also result in heat escaping your property which could lead to an enormous amount of money squandered in energy costs.

Unfortunately, repairing double glazing windows that have been misted can be a bit difficult and isn't something that should be attempted by anyone who doesn't have the necessary knowledge of the glazing industry and construction industry. However, if you're prepared to take on the challenge, it's possible to repair a misted sealed unit by adding moisture absorbing desiccant back into the space between the glass panes.

Keep in mind that this is only a temporary fix and the condensation could be back. The process will have to be repeated. It's far more effective to replace the misted glass and it's much more hygienic and faster. A replacement will bring back the original insulation to your home and is not achievable by repairing. If you're experiencing misty windows and condensation, we suggest you contact an established company that provides double glazing. While you wait, keep your windows as dry and clean as possible.

Water Leaks

Double glazed windows shouldn't leak, whether they are old or new. Leaking Windows are not just a nuisance, but can cause serious damage to your home. This includes the growth of mold, structural damage, and increased heating and cooling bills. Contact a professional window company as soon as you notice a problem.

Window leaks can be an indication that the seals between glass panes aren't working correctly. If you notice condensation between the panes of glass, it is an indication that the seal between the two panes has deteriorated. Moisture is now flowing through the insulation space between the two panes. While a little condensation is normal, if it persists and is visible on the exterior or interior of your house, it's time to get an repair service.

The accumulation of water at the bottom of your window frame is another common cause of leaks. This could be a sign of blocked drain holes or flashing that is not properly installed, or an uneven sill. It is simple to clear a clogged drain hole using a coat hanger. Using roofing caulk, you can fix flashing that isn't working properly. A misplaced pitch could be the cause of the window sill sloping to one side. A reputable window repair company will be able to determine the cause and provide a fast, cost-effective solution.

While it is not unusual for old UPVC windows to fail or leak, it is much more cost-effective and efficient to hire an expert double glazing repair-glazed repair service. They can bring back the appearance and function of your windows back to what they were like when they were brand new. They can also replace hinges, locks and handles if needed. Professional window repair companies will offer you a warranty on their work. You wouldn't get this if you attempted to repair the windows yourself.

It is difficult to open

If you notice that your windows are becoming harder to open, contact the company that sold you them. In the majority of cases, a simple repair can fix the problem. If the problem persists it is possible to look at replacing your windows with more modern ones. Double-glazed windows are available with state-of-the-art features that will keep your home warm and secure, such as slimline uPVC frames made of aluminium, advanced insulation to stop the heat from escape, and sophisticated security hardware that deter intruders.

Condensation between glass panes is another common sign that double glazing requires repair. This is due to an issue with the seals between the two panes. Inert gases are designed to escape between the panes of glass and then be replaced by humid air. This will keep your windows airtight and energy efficient. If this isn't the case, the seals could have deteriorated over time due weather conditions or other factors.

A draft coming from your double-glazed window is also a common sign that the seals have failed, meaning that cold air is leaked into your home. This can also lead to higher energy bills, as your heating system will need to be more efficient to keep the temperature inside your home in a stable state.

In certain cases, the draught could be solved by lubricating the hinges, handles or mechanisms on your double glazing window-glazed doors or windows. It is important to note that this is a temporary solution, and you'll have to seek out the experts when the issue persists.

To prevent condensation, consider installing ventilation in your windows and doors, such as extractors or air bricks. You should also allow double-glazed doors and windows to breathe, which is possible with trickle vents.