Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they are not susceptible to get rusty or decay.

It is important to clean and oil UPVC windows and uPVC window repairs doors regularly. This will help prevent costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows it is fairly easy to replace windows, and the new one is usually able to fit into the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the old panes. In this situation, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a dropcloth before you start working on the glass to ensure that any shards fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

It's a great idea to seal the gap after the glass has been removed. This will keep drafts and water from getting into your home until a professional is able to repair the window. This also serves as a barrier to prevent any intruders from making their way into your home. If the gap is large, you may think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a variety of issues that include sliding. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window which is sliding. To accomplish this, you'll have to open the window so that you can access the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close the window and verify the fitting. If you're happy with the fit, tighten the screws until they stay in position.

If you cannot reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window waterproof and draughtproof.

uPVC handles can also become loose. Often it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. You'll first need to close the window and perform an experiment fitting. The corners of the sash need to align with the casing joint. If it doesn't then you can use a screwdriver to loosen the handle and then return the mechanism to its original the position it was in.

3. Water Leaks

It is essential to act if you get up each morning to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and affect your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be done by any DIY expert. Depending on the severity of the problem the caulking that was used up may require removal before a new layer of caulk can be applied. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and could decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double glazed window repairs near me glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open in a breeze It could be hinges that are at fault. Any competent DIYer can replace hinges in just a few minutes.

Like all mechanical parts hinges will wear out over time. It's very simple to change a window hinge but it's much easier if someone else helps you to hold the frame.

Check that the uPVC hinges open and close in the proper direction. This can be done by looking for the arrows on each hinge, this shows which way the window should open.

The problem can be caused either due to opening the window in the wrong way or by a poor installation at the factory. Sending us a picture through our website can often solve the issue. We are happy to give assistance.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant on the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different factors. First, the hinges due to wear and tear could become misaligned. This causes gaps to develop where the sash meets the frame. If they are damaged beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it may be possible to just give them a good clean, but in some instances it could be necessary to get them replaced.

These seals can wear down or get damaged over time, allowing air to escape. Installing high-quality weatherstripping can help stop draughts. Replace the windows made of upvc with low-emissivity glasses. This will help regulate indoor temperatures and lessen the risk of draughts.

Another, and most effective ways to cut down on drafts is to use an draught excluder. These are typically fabric tubes filled with some kind of filler. They can be placed on the top of your windowsill. They will keep your home warm by blocking cold air.

With a bit of regular maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. However, it is important to realize that all windows have a life span and there may come an point at which it is more efficient to replace them than fix them. If you are experiencing issues with your upvc window you should consult an expert as soon as possible.