Choosing uPVC Replacement Window Handles

Almost all customers agree that these upvc replacement window handles are easy to install and feel as good quality. But it's important to understand that the type of handle you choose should be appropriate for your window.

The primary factor is the step height, which refers to the space between the handle's nose to the frame or base. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There is a variety of replacement upvc window handles available to buy. There are many styles and colors to choose from, so you're bound to find something that matches your existing windows. It's easy for you to buy something on impulse particularly when the handle is damaged. So it's best to do some research before purchasing the replacement. The first thing to consider is what kind of upvc handle do you have now and what the difference between types is. The table below lists the most popular handles so that you can select the best one to match your window.

Espag handles are the most popular and are found on most modern double-glazed windows. They are typically attached to the frame with two screws that are screwed into the frame from both sides, above and below.

The spindle bar at the back could be of different sizes, and will determine whether they are left-handed or right-handed. This is the reason it's crucial to take a measurement of the handle you have in order to make sure that you're ordering the correct replacement.

The arm is secured to the frame with two bolts, just like the Espag handle. However, the handle has a low projection so that it doesn't damage your blinds. This is a great choice if you want the handle to blend with your blinds and upvc windows.

Cockspur handles resemble Espag handles, but they have a nose which closes over a wedge which rests on the frame of the window. This type of handle can be found on some older wooden and Upvc windows.

Tilt and turn handles are often found on casement windows. They can be operated by turning the handle or pressing at the top of the window. This opens the window from the inside, allowing you to clean the outside without having to climb out onto a ladder or step over the fence. These are also a great option for those with limited mobility, and can increase security and accessibility in the home.

Tips and suggestions and

There are a number of different types of uPVC window handles, and many people will have to replace them at some point. It's important to have some tips and tricks to help you make the task easier.

The first thing you should do is determine the type of handle you have at home. Based on the type of handle it is attached to and what locking mechanism it utilizes it could be necessary to change the entire handle and lock. If the roller cams or shoot bolts (espags) are jammed, or seizing up, you'll need to replace them, along with the handle.

Fortunately, the majority of uPVC handles are identical and follow industry standard size, which makes replacing them a fairly easy process. The first step is to remove the screws from the handles. These are usually the pozi-drive screws. After the screws have been removed then you'll be able to remove the handle.

If you've got the handle broken it is recommended to make a note of how much of the spindle protrudes from the base of the handle. This will help you measure the spindle length for an alternative handle. Simply measure the amount that the square peg sticks from the bottom of the handle.

This is particularly important for inline uPVC window handles because they are always straight and will only open either left or uPVC Replacement Window Handles right, and won't operate in the middle. It's a good idea if you're not sure of the kind of handle you have at your home, to borrow a handle to see how it functions.

You can also determine the handiness of a uPVC window by observing the way the handle turns when it is used. Handed handles can be turned either clockwise or counter-clockwise. If you're unsure, you can always have someone else open the window with the handle, and figure out how it works in this way.

Take a measurement of the spindle

It can be difficult to pick the right replacement handle for your window since not all handles come in the same size. It is important to accurately measure the spindle when installing the new handle. This will ensure that the handle is suitable. There are a variety of types of uPVC window handles that operate in different ways so it is vital to know the type of handle you are using and the type of locking system that you are using.

Espag handles come with a spindle that extends from the rear of the handle and then into the lock gearbox that is within the window frame. When you turn the handle this turns the lock inside the gearbox and opens the window. They are typically used on uPVC windows with casement and can be locked with keys to increase security.

Cockspur handles feature an "nose" which closes over a wedge-shaped striker block on the frame and they are commonly found on older double glazing replacement windows-glazed uPVC windows. They are also quite simple and they can be locked with keys. It is more difficult to replace these handles as they are not as popular as the handles with espagnolette.

If you have a tilt-and-turn uPVC and you require a new handle that has a different locking system. The handle can tilt the window and allow it to be rotated around to fully open it. You must make sure that the handle you pick has a spindle length of at least 55mm or it won't be able to reach into the frame of the window.

You can use the same method to remove and replace this type of uPVC handle, however you must be cautious when you remove the old one. It is possible to open the window more than usual to access both screws that secure it to the frame. Once you have fitted your new uPVC handle and checked that it is in the proper position, you are able to tighten the screws, and test the lock to ensure it functions properly.

Fit the new handle

If you have the proper replacement handle, it should simply be screwed into place. This requires a screwdriver but may be easier with an electric one. It is important to not overtighten the screws when screwing them in. This could cause the handle or knob to swell.

Inserting the spindle is the next important step to attach the new handle. The spindle is a part that is inserted into the handle and operates the locking mechanism of the window. It is essential that the component is properly fitted, as this will permit the window to be opened and closed securely.

There are a variety of different kinds of uPVC window handles. There are a variety of window handles made of uPVC.

Espagnolette Handles are inline handles which can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved design which is ideal for hard-to reach windows.

Tilt and turn handles - These are used to control the opening mechanisms and closing mechanisms for tilt and turn windows. They also allow for the movement of windows.

They are the most popular and the majority of uPVC windows have these in place. In the UK they are often referred to as "Bay Windows".

It can be frustrating If your uPVC handle breaks. There is no need to change the entire uPVC window due to a broken window handle. There are a number of easy steps that can be taken to repair and replace a damaged uPVC window handle.

Fixing your broken window handle quickly by identifying the type and determining the spindle. It is crucial to take your time and prioritise security when working with windows or tools, but this is a relatively straightforward task. It could mean the difference between having a safe and secure home, or having a window that can be easily opened. If you have any questions or would like to speak to a professional about replacing your window handle, call Bridgewater Glass. We have a group of experienced and knowledgeable experts who can assist with any issues you might be having.