Double Glazing Lock Repairs

Having quality locks on your doors and windows can stop burglars from getting into your home. They usually don't want breaking glass or double glazed repairs trying to get through windows that are open.

Some double glazing owners, however, have encountered issues with their window or door lock after installing. Luckily, these problems can be fixed without having to purchase new double glazing.

Broken or damaged locks

If your uPVC door or window lock is damaged or defective and requires a locksmith, they can repair it for you. They can repair hinges, striker plate and locks for double glazing. They can also adjust the cylinder's position to correct any misalignment issues which could cause the handle to not function correctly.

The mechanism could be seized when the key is inserted into the lock, but it does not turn or become difficult for you to insert. This can be due to dirt or grime accumulating within the mechanism. If this is the case, it may be possible for the lock to be cleaned and lubricated. It is essential to use a dry lubricant, such as graphite or double glazed repairs teflon instead of oil which attracts dirt and stick to the inside of the mechanism. After lubricating the lock you must insert the key and then try to turn it. The lubricant should get into the mechanism and the lock should spin effortlessly.

A damaged lock can be caused by loose screws inside the lock mechanism. They can loosen and break off or fall out completely, preventing the lock from working correctly. A screwdriver can be used to tighten the screws however, it is important not to tighten them too much, since this could cause damage to the internal components.

A faulty lock is dangerous for you and your family. This is especially relevant if you have young children. It can be easy for them to unlock the door without you knowing, and this can allow them access to your home. If you're worried that this might occur, a licensed professional locksmith can assist you re-secure the Double glazed repairs glazing doors.

Misty Glaze are a professional uPVC and double glazed repair glazing company based in Lancing and can repair all kinds of damaged and broken mechanisms such as handles, cylinders, handles and lock systems on uPVC windows and doors. We can also reconfigure the locking system on your uPVC windows or double glazing to meet your requirements. This means that replacement windows and doors are not always required.

Broken or Faulty Handles

As part of their overall security plan, many double-glazed windows have a multipoint lock. This is an excellent option for those who are concerned about opportunistic burglars trying to gain access to their home. It is also a good idea to ask your installer about anti-lift locks which can be put in on top of the locks that are already in place to ensure that your window is locked in the closed position.

It's not uncommon for the handles to be damaged or even fail - they are the first part of your window that will be forced open by a criminal intent on breaking in. The good news is that this is one of easiest parts to repair double glazed window.

Modern handles made of aluminium and uPVC have a multi-point locking mechanism called Espagnolette that is designed to resist forced entry. This upgrade to security is typically offered as an optional extra on new uPVC window installation. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot also as an optional feature on all new double-glazed windows.

It is crucial to fix the handle as soon as you can if it's damaged. A damaged handle can stop the window from closing correctly and allow drafts in. It could also be a weakness that thieves can exploit, putting your family's belongings and you at risk.

The process of fixing the damaged mechanism begins with gaining access to the window frame and then removing the damaged handle. The gearbox can then be accessed to identify the type of gearbox used to open the handle. This will permit a replacement that matches the profile and the internal window frame mechanisms.

After the mechanism is replaced, the handle may be returned to the original screws. However, we suggest replacing them with larger screws to ensure a more secure fit. The final step is to apply a coating of clear sealant to protect the handle from further corrosion. After that the window will be fully operational again and at a fraction of the cost of replacing the entire window.

Broken or damaged hinges

If your windows do not close properly, you may be experiencing draughts, the weakening of your home's security barrier and an increased risk of damp or water damage. Windows hinges that break or fail to function properly are a common issue and can be easily repaired.

If you have a uPVC window that won't close or open and close, it's likely that your hinges are damaged or broken and require replacement. A lot of window manufacturers will require that you purchase an entirely new window unit to fix this simple issue, but we are able to replace the hinges in order to save you money.

Window hinges are often damaged due to repeated use or might be damaged due to corrosion over time. If you have a broken window hinge, it is crucial to take the necessary precautions to prevent further damage. This means not causing the window to close or open.

You can locate the appropriate parts for your hinge by identifying its model. The most common kinds of window hinges include Maco, Mila, Roto and other brands. Talk to a professional before purchasing parts that will not fit into your existing hardware. This could cause further damage.

The hinges that are not working properly can cause big issue for your uPVC window and doors. They can be a major source of noise, and they can also allow for water infiltration which could damage your windows.

Check that the pin barrels on both sides of the hinge are aligned. If not then tap the head pin using a hammer to make an arc in the hinge barrel. This will keep the pin in place. A friend can help you hold the doors as you take off hinge screws and hinges. Replace the hinges with those that are the same size and install the screws with glue. Finally, secure the hinges with weights or clamps while the glue dries.

Once the hinges have been fixed after which you will be able to re-install the door and then reattach the handle. It is recommended to replace the screws using the same length of wood dowels as the screw that was originally used so that they match up with each the other.

Glass that is broken or damaged

uPVC Windows can be damaged in time, despite the fact they are great at keeping cold out and conserving the heat. This can be the case with broken or damaged glass as well as defective locks. If not taken care of, it can become a very costly issue. It can also detract from the aesthetics of your house and could lead to a loss of insulation, so it's important to repair any damage as quickly as possible.

If your glass is cracked but not shattered, you can usually fix it yourself using the right tools and techniques. Be sure that the area surrounding the broken glass is free of debris, so that fragments don't cause injury or cause a trip hazard. After that, take away any broken glass pieces and dispose of them in a proper way. Then, place masking tape over the entire area to stop fragments from bouncing around and sticking to your skin when you move them. If you're dealing with a double glazed repairs-pane glass, it's best to fit the glass pane before glueing it back in place so that you know you'll have enough space to complete the project.

Before applying the glue, clean the surface of the broken frame and the glass with a a dry, clean cloth. Follow the directions for application and curing time which may differ from one product to the next. You may have to clamp the broken glass using clamps that are lightweight and designed to support fragile materials, depending on the angle.

After the adhesive has fully cured, carefully reinstall the glass inside the window frame, ensuring it's flush with the edge of the frame and there aren't any gaps between the glass and the window sash. Be careful to avoid flexing the window while it's installed, as this could weaken the seal and cause condensation and water infiltration.

Contact a professional glazier, such as O'Brien(r) to arrange an exchange if your glass window has been completely broken. It's essential to act swiftly in the event of broken glass.