How to Replace a Nissan Juke Spare Key

Nissan Juke is a fun and stylish hatchback with an unusual engine setup. It's noisy, but it's still enjoyable to drive.

The battery for the key fob in the Nissan Juke has to be replaced every two years or so, or if it's low. It is easy to do at home, but you'll need some tools.

Dead Coin Battery

If your Nissan Juke key fob isn't functioning the first thing to look at is the coin battery within it. It could be dead and need to be replaced. This is a quick fix that will take only some minutes. Flip the fob upside down and you'll be able access the tiny latch/release on the back. Remove the battery that was in use and then insert the new one, ensuring sure it's facing down on the fob. Line between the two halves of the fob with care.

The fob will need to cleaned if it was exposed water before you can install an entirely new battery. This can be accomplished using a paper towel along with isopropyl alcohol or electronic cleaner, and allowing it to dry completely before inserting the battery.

The key fob also needs to be connected to the car to start it, which is done by following the directions in the owner's manual or using an OBDII scanner. The most likely reason the key fob stopped functioning is because it was not linked to the car. It is also possible that the fob is equipped with malfunctioning chips, but this is a rare occurrence. A new receiver module might be required in this scenario. If this is the scenario, it's going to need to be replaced by a certified technician.

Water Damage

Key fobs are battery-powered, and the batteries require replacement every two years or so, or at the first sign of the car not responding when you hit the "start" button. Keys are fitted with rubber seals to keep water out, however submerging the key fob in the ocean or in a pool can cause damage to the chip inside. If this happens, you will require a new key from Nissan or an automotive locksmith.

It's possible that the computer has lost connection to the key fob that could be due to a variety of factors. This can be fixed by restarting the car. If the "Key ID error" message still appears then you must contact Nissan for assistance.

Three of the most common causes are a dead battery for the key fob as well as a key not programmed, and a damaged key fob. The first two issues are fairly easy to fix, while the third is more difficult to pinpoint and repair immediately however, it can be fixed with patience. Compare Nissan Key Replacement prices in your area with WhoCanFixMyCar, and book your repair online. It only takes two minutes and you can read reviews from local garages, Nissan car mechanics and dealerships before you decide.

Faulty Chip

The key fob on your Nissan Juke has a special chip that sends an indication to the car whenever you turn it. If the chip is damaged, it can cause the key to cease functioning. In this case it is possible to repair the issue by replacing the key. There are a myriad of reasons your Nissan Juke's key may be faulty, including water damage or a dead coin battery or a malfunctioning receiver module.

If your key fob stopped working after a wash or even a bath, you need to check the chip for damage from water. Make sure the metal retaining clips are tight and that the chip is not exposed to water. If you notice any signs of water damage, consider removing the battery and wiping down the electronic component using isopropyl alcohol or an electronic cleaner.

If the chip is faulty If it is damaged, you should visit your local locksmith shop or dealership. They will need to know the year as well as the model, make and year of your vehicle in order to find a replacement. Also, you will need record your VIN (Vehicle ID Number) so that the dealer, or locksmith knows the key you have. This will enable them to check the correct key code and ensure that they cut the correct key.

Faulty Receiver Module

The key fob transmits a radio signal to your vehicle that performs various functions. The key fob can unlock your trunk when you are rushing with groceries to the car or start your car by pressing an icon on the fob. It can even open your windows and turn on the horn in case you have a mishap and lock your keys inside the car.

If the key fob stops working, it could be an issue with the receiver unit in the vehicle. The receiver modules are tuned to detect specific frequencies that correspond with the signals that are transmitted by the Nissan key fob. A damaged receiver module can prevent your car from responding to the signal generated by the key fob of Nissan.

Whatever the way your nissan key programming (visit fpcom.co.kr) key fob ends up getting damaged, it's good to have a spare in case the key becomes broken or lost. A locksmith or a dealership can program the spare key to work with your Nissan. This will save you from the hassles of losing your keys or locking them inside your car.

If your Nissan Juke key fob has been exposed to pure rain or tap water, the problem could be resolved by cleaning it with isopropyl alcohol, or electronic cleaner. If the chip has fried, you'll have to purchase a new keyfob which can be programmed for your vehicle by a locksmith or dealer.