Ghost 2 Immobiliser Problems

Created to guard vehicles from hacking and key cloning, the Ghost 2 immobiliser is a discrete device that is able to be installed without damaging your vehicle. It stops you from starting your car unless you have entered the correct sequence of buttons in your vehicle. This is similar to the mobile password.

Stop/Start

Ghost Immobilisers stop vehicles being stolen by blocking the engine from starting until it is issued the correct PIN code. This is done without modifications to the vehicle and is completely undetectable to thieves. The unit communicates with the ECU via the CAN data bus, which allows it to lock the vehicle. This system is like the one automobile manufacturers have been using in their cars for many years However, thieves cannot add a new key or use key relay technology to bypass it like they can with factory fitted systems.

Ghost is compatible with any vehicle with an engine, which includes cars, vans, motorhomes and caravans as well as bikes. The same system can also be used on electric vehicles. It is an excellent alternative to steering wheel locks and wheel clamps and can be installed with little effort.

When the Ghost is activated it will stop all buttons in your car and stop the ignition being started without a PIN number. You can enter the code by hand or using the Android or Apple app. If a wrong code is entered the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great way to deter thieves. If the vehicle is unable to be started, they will move on.

The Ghost is a weatherproof, small device that can be hidden behind the most difficult-to-access areas of your vehicle. Installation takes between 20-30 minutes for each vehicle. It is also very simple to remove should you decide to switch your vehicle or hand it in for service or valet parking. It is a fully TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is endorsed by a few insurance companies. It also comes with a secure emergency Pin Code override and features a Service/Valet Mode that can be activated by pressing an app button or with your key fob.

Disarm

Ghost immobilisers are not mechanical anti-theft devices that are able to be removed, are concealed inside the vehicle. They are virtually impossible to bypass or hack and even if discovered, a burglar will not be able to start the engine. This is because a ghost immobiliser blocks key cloning, signal jamming and device spoofing - techniques that are used frequently by thieves to gain access to vehicles with standard immobilisers.

The immobiliser sends a message to the ECU. If the wrong code is sent and the vehicle is not started as the engine will not start up. While it is possible to disable the ghost immobiliser with software, this is very time-consuming and difficult. Only an authorised installer can install and use the software.

The Ghost immobiliser is a tiny system that sits within the wiring loom of your vehicle and is inaccessible to the naked eye once installed. It doesn't show up on diagnostic systems. There are no LED indicators, and it does not communicate with the engine via the OBD port. It communicates in a silent manner via the CAN data circuit.

The system won't allow the vehicle to start until it receives an input PIN code that is entered by the user. This is entered through buttons on the steering wheel and door panels as well as the central console. This is a more secure way to protect your car since it doesn't require the use of a key fob or remote control.

In addition to this Ghost offers a service mode which can be activated using the application on your mobile phone. This will allow you to hand over your keys to someone for service or valet parking without entering the disarm sequence.

It is not recommended to remove the system on your Ghost by yourself, regardless of whether it is in service mode. This could damage your engine. It is recommended to contact a TASSA certified installer who will be able to remove the system safely and properly. Our most recent GHOST immobilisers have a specific fingerprint QR sticker that is hidden in different parts of your vehicle. They are connected to our security register. In the event that the device is removed and then sold on the blackmarket it will be able to trace the original owner.

Anti-Hijack

Ghost Immobiliser 2 has a highly effective anti-hijack function. It functions like smart keys and is one of the most secure methods to ensure your car is safe from theft. The Ghost system will automatically turn on the hazard light and stop the car's engine when the ignition is turned on and the vehicle is in a stationary position. This gives the driver and passengers enough time to press the secure button before the system can be activated.

In contrast to other systems that simply stall the engine whenever the ignition is switched on, the Ghost system is based on a specific controller and timer unit which will shut off the fuel cut-off valve 14 when it is activated after a set period of time even when the ignition is turned on! The delay time frame needs to be long enough to allow the hijacked owner of the vehicle to drive away from the location of the incident and to maintain a sufficient distance from the vehicle in which it is stuck before the system is able to reactivate.

The Ghost offers added security that blocks common hacking methods used to gain entry to modern cars, such as relay attacks and key range expanding. The Ghost system communicates in a quiet way and does not emit signals that can be snatched by thieves with codes-grabbing or RF scanning technology.

The ghost immobiliser installation near me system features a service / valet mode that allows your car to be temporarily started and driven without the requirement for a PIN code. This is perfect for parking your vehicle and need to leave it for a short period of time, such as for example to put groceries in the boot, or open a garage door. The system will exit service mode based on speed and time or by using the easy PIN code entry process that gives you total assurance that only YOU are able to use your vehicle!

Keyless Entry

Many customers are seeking out additional security measures because of the increasing trend of contactless car theft. This is especially relevant for those who have put in time or money into personalising their vehicle or own expensive vehicles. An add-on immobiliser can be a cost-effective way to prevent this type of theft as it can prevent your vehicle from starting unless the correct pin code is entered on your key fob.

Immobilisers are made to work with different vehicle circuits, including ones that control starter motors as well as fuel pumps. They can also shut off the car alarm in order to attract attention and deter potential thieves.

These devices communicate with the engine control unit (ECU) via the CAN data circuit. They also they stop thieves from trying to bypass it by installing a new ECU or using an engine key programmer. The immobilisers can be installed discretely inside your vehicle, leaving no marks and are totally invisible to the tools high-tech thieves employ.

As opposed to other systems that require a separate app, or a tag to be worn on the driver's person the Ghost immobiliser can only be deactivated by pressing a sequence of the existing electronic buttons on your steering wheel, door panel and the centre console, which allows you to select a customized pin sequence. The pin can be changed as often as you like, meaning it is as secure as a credit card. It is even more difficult to break because it requires at least 20 presses.

Ghost also offers a Valet/Service mode that allows you to disable the system if your car is to be turned over to valet parking or services which allows it to operate within predetermined guidelines, such as 30mph speed limits which means you don't need to worry about your car being driven at a reckless speed. The system can be activated with the original key or entry code.

Installed by our reputable installers It is the most secure and effective aftermarket CAN-immobiliser that is available. It is also fully certified by Thatcham for insurance purposes. The Ghost 2 immobiliser is also provided with six QR fingerprint labels and an ISR contact card that contains your unique QR code, as well as a secure emergency code, all of which can be kept in the purse or wallet of your car.