Replacement Handles For UPVC Windows

UPVC window handles are available in various designs, but they all use the same locking mechanism. To replace a uPVC handle first remove the top screw from the base of the window handle which will reveal two more screws.

Then, take measurements of the spindle to ensure your new handle will fit. It is important to identify the type of handle you currently have as there are several sizes.

Inline Espagnolette Handles

The majority of double-glazed windows feature Espagnolette handles which operate multi-point locks for improved security. The handle is operated by an 7mm square spindle which connects to a gearbox within the window frame. The gearbox rotates the multi-lock mushroom when the handle is turned. They are available in a variety of designs, including cockspur inline, key, and cockspur locking handles.

Our uPVC replacement handle kits are designed to make it simple to replace a damaged or defective espagnolette window handle. These uPVC handles come with all the fixing screws and a range of spindle sizes suitable for the majority of applications. They also come with key-plugs which allow them to be switched from standard open/closed handles to fire escape or egress locking handles (if used with the correct key plug).

If you are just looking for an espagnolette handle that can simply replace your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Yale Sparta Inline Espag Handle is a different choice. It has been designed to limit aesthetic intrusion and has a reduced height at the base. It is part of the suitable hardware range and comes with a variety of finishes that all conform to the requirements of BS EN1670:2007 Grade 5. They have been tested for durability and are suitable for use in acidic woods and coastal environments. They are compatible with cylinder-immobiliser inserts to lock keys where required.

Cockspur Handles

Cockspur handles are typically found on older uPVC or aluminium windows and doors they are a simple latch and catch arrangement. The handle nose closes onto or into the catch which is a wedge block made of plastic mounted on the window frame. The wedges are available in different sizes, so it's crucial to determine the size of step you need prior to buying a replacement handle. In general Upvc windows typically use a 21mm step size and aluminium frames usually come with a handle step of 9mm.

The cockspur handle is lockable with a key, providing security to your home. The lock is installed into the handle with a spindle that fits into the hole of the handle (also known as a backset). The spindle has a 7mm square cross-section and is used to open or close the window.

It is important to ensure that the new cockspur handle has the same height of the original. It is typically measured from the base spur of the handle to underside of the handle's nose. This measurement is also known as the stack height or backset and it is crucial to know this information prior to purchasing the handle.

Cockspur handles are available as straight/universal, cranked, leftor right-handed versions. This allows the handles be mounted on either the left or right opening window and allows the operator to have an easier access.

Make sure your window has a restrictor. This is designed to stop the handle from opening beyond a certain amount. These are usually required for high-rise buildings or commercial buildings for security reasons. The majority of domestic homes don't need them.

There are a number of different styles and colours of the cockspur handle. These include brushed stainless steel and white uPVC options. The ideal cockspur handle for your windows depends on your style and preference and how you want your window to function.

Handles that tilt and turn

The UK is home to a wide range of double-glazed windows that have tilt and turn handles. Both timber and upvc ones have them. The handle can be rotated at any angle, up to 180 degrees. This allows the window open into the room fully, and also to lower it to let air circulate. The handle is locked into this position and requires the use of a key to unlock it whenever needed.

This kind of handle can be easily replaced, as it has only one large handle, not a number of smaller ones. This reduces the overall look of the handle and [Redirect-302] is more in keeping with the latest minimalist design trends. In addition they are much simpler to clean than casement windows, because the window opens up inwards and can be cleaned on both sides.

Another advantage of tilt and turn windows is that they are 4 - 8 times stronger than casement windows. This makes them ideal for larger windows and door. The frames are also constructed from steel cores that adds strength and durability.

The tilt-and-turn mechanism is also more secure than a casement because the handle is locked in any position. This is particularly important in areas where children could live, since it will stop them from accidentally opening the window.

Tilt and turn windows are a popular choice for many houses, since they can be utilized in various ways. They can be opened horizontally as a regular window, dropped down in the hopper style for ventilation or tilted inwards to allow for cleaning and maintenance. This is a great option for those who wish to increase airflow and reduce the noise that surrounds their home. Glass is easily removed making them easy to clean and maintain. They are available in a variety of sizes and colours. These windows can be used in any home, and complement both traditional and modern styles.

Crank Handles

Crank handles are easy to use and offer a great view of the outside without obscuring the glass. They are typically used on casement windows that are hinged on the side or awning windows. They have the same mechanism as windows, with a linkage arm that supports the window sash, that opens and closes by cranking the handle in the clockwise direction. Unlike other types of handles that are geared towards windows, a crank window's mechanism and handle are subject to wear and tear that can cause the gears strip and the handle to cease functioning or fall off the shaft of the operator. Inspecting both the crank handle and the mechanism of the operator regularly will ensure that they remain in good condition for many years to come.

A crank handle is composed of a mechanical shaft that rotates perpendicularly and is connected to an arm. The arm is operated manually by grabbing it and turning it in a circular direction, much like you would use the sharpener of a pencil. In some applications the handle could be operated via a leg.

The base of a crank handle is hollow. This hole allows the handle to be connected to machinery and equipment. The handle's arm also comes with a connecting rod which transforms the circular motion of the handle into a rotary or reciprocating motion to operate machines and equipment.

In addition to adjusting machinery and equipment The crank handles are also commonly used on boats to help them load onto trailers. They're typically made of stainless steel which is resistant to corrosion in marine environments. Due to this, the majority of boat crank handles are powder coated to shield them from damage and also to make them easier to clean.

If your crank handle has stopped working or won't open the window, it could be time to replace window glass near me it. Look for the trim mounting screws inside the track of the window frame. If there's none then you can use a rigid putty blade to open the cover by sliding it between window jambs and the frame. If this doesn't work, you can remove it and access the crank by unbolting screws from the frame of the window.