Choosing uPVC Replacement Window Handles

Almost all customers agree that the upvc replacement window handles are easy to fit and feel like high-quality. However, it's important to know that the kind of handle you select must be right for your window.

The most important aspect is the step height that refers to the space between the nose of the handle to the base or frame. Other factors to consider are lockable mechanisms and styles.

Replacement parts

There is a broad selection of Replacement Window Handle upvc window handles available to buy. There are numerous styles and colors to choose from, so you're sure to find one that will match your existing windows. It's easy for you to purchase a product on impulse, especially when the handle is damaged. Therefore, it is best to do some research before buying an alternative. The first step is to be aware of the type of upvc handles you have and what the differences are between them. The table below lists the most popular handles to help you select the best one to suit your window made of upvc.

The majority of double glazed windows replacement-glazed windows come with handles for epag. They are typically attached to the frame using two screws that screw into the frame from both sides.

They have a spindle bar on the back, which can be of a variety sizes. This will determine the way they operate (either left or right handed). It is essential to know the measurements of the handle you currently need to ensure you get the appropriate replacement.

The arm is fixed to the frame by two bolts, much like the Espag handle. However, the handle has a lower projection, so that it doesn't damage your blinds. This is a great option when you have blinds on your windows made of upvc and you want to make sure the handle blends with the blinds.

Cockspur handles look similar to Espag handles, but they have a nose that closes over a wedge that sits on the frame of the window. This kind handle is found on a few older wooden and Upvc windows.

On casement windows tilt and turn handles can be operated by turning the handle or pressing on the top of the window. This allows you to open the window from inside and clean it from outside without the need to climb a ladder or step across the garden fence. They are ideal for those who have limited mobility, and can enhance security and replacement window handle access to the home.

Hints and tips

Many people will need to replace their uPVC window handles at some moment. It is essential to know some tips and tricks to aid in the process.

The first step is check what type of handle you have at home. Depending on what the handle is connected to and the locking mechanism it is using it might be necessary to change the entire handle and lock. If the roller cams and shoot bolts (espags) are stuck or are getting stuck, you'll need to replace them along with the handle.

Thankfully, the majority of uPVC handles conform to industry standards and are very alike. This allows for a relatively simple task. The first step is to remove the screws from the handles. These are usually pozi-drive screws. After these screws are removed, you are able to remove the handle.

It's a good idea to note how much the spindle extends from the base of the handle after you take it off it. This will allow you to measure the spindle length for an alternative handle. To do this, simply take a measurement of the square peg that sticks out from the bottom of the handle and use it as a guide.

This is especially important for inline uPVC window replacement companies handles since they are always straight and open left or right, and they won't operate in the middle. It's a good idea in the event that you are not sure what type of handle you have at your home to borrow a handle and check out how it functions.

Another great tip for working out what handed the uPVC window handle is to look at how the handle moves when it is operating. Handles that are hand-operated will turn clockwise or anti-clockwise. If you are unsure then ask someone to open the window using the handle and observe what happens.

Find the spindle's measurement.

Choosing the correct replacement handle for your windows can be a bit difficult since not all handles are the same size. It is essential to accurately measure the spindle when fitting a new handle. This will ensure that the handle is suitable. There are a variety of types of uPVC window handles, and they operate in different ways, therefore it is crucial that you know which kind of handle you have and the type of locking system that you are using.

The spindle of the Espag handle is a part that extends from the rear of the handle and goes into the lock gearbox within the window frame. When you turn the handle, this will turn the lock inside the gearbox, allowing you to open the window. They are usually used on uPVC casement windows and they can be locked with keys to offer additional security.

Cockspur handles are equipped with an "nose" that closes over the striker block in a wedge shape on the frame and they are commonly found on older double-glazed uPVC windows. They are also quite easy to install and can be locked using keys. It can be more difficult to replace these handles since they are not as popular as the handles with espagnolette.

If you own a tilt-and-turn uPVC and you require a new handle that has a different locking system. It will be able to tilt the window open but also turn it inwards and outwards to fully open it. You should select the handle with a spindle that is at least 55mm in order to be able to reach the window frame.

The same procedure can be used to remove and replace the uPVC handle. But, you'll need to take care when removing it. You may have to open the window a little wider than usual to ensure that you access both screws that attach it to the frame. After you have installed your new uPVC handles and checked that they are in the correct position then tighten the screws and then test to ensure the lock is working correctly.

Replace the handle with the new one.

When you have the proper replacement handle it is easy to screw in the right place. It will require a screwdriver and an electric one might be a lot easier. It is important to not overtighten the screws before screwing them in. This could cause the knob or handle to become warped.

Inserting the spindle is a second crucial step to install the new handle. The spindle is the part which runs through the handle and operates the locking mechanism in the window. It is crucial that it is fitted correctly, as it will ensure that the window can be closed and opened with confidence.

There are a myriad of different kinds of uPVC handles. These include:

Espagnolette Handles are handles inline that can be used to open tilt windows and turn them.

Cranked Espagnolette Handles: These are similar to inline handles but have a curved shape which is ideal for hard-to reach windows.

Tilt and Turn Handles these are used on tilt and turn windows to control the closing and opening mechanisms.

The majority of uPVC window frames are fitted with these. They are often called 'Bay Windows in the UK.

It can be very frustrating if your uPVC handle breaks. There is no need to replace the entire uPVC windows because of a damaged window handle. There are a few simple steps you can take to fix or replace a broken uPVC handle.

By identifying what kind of window you have, measuring the length of the spindle, and then purchasing an appropriate handle, you can fix the broken window handle. When working with tools and windows, it is important to put safety first. But, this is a relatively simple job. It can make all the difference between having a secure and safe home or an insecure easily opened window! If you have any questions or want to talk with a professional regarding replacing your window handle, contact Bridgewater Glass. Our team is skilled and knowledgeable to help you with any issue.