Choosing uPVC Replacement Window Handles

Most customers agree that the upvc replacement window handles are simple to install and feel like good quality. It's crucial to understand that the handle you pick for your window should be suitable.

The key factor is the step height that is the distance from the nose of the handle to the base or frame. Other considerations include lockable styles and mechanisms.

Replacement parts

There are a wide range of replacement upvc window handles available to buy. They are available in a variety of colours and styles so there's bound to be something to suit your existing windows. It's easy to purchase a product on impulse, especially when the handle is damaged. It is therefore advisable to look over a few aspects before purchasing a replacement. The first thing to think about is the kind of upvc handle do you currently have and what the difference between the types is. The table below outlines the most popular handles to help you choose the one that will fit your windows made of upvc.

The majority of double-glazed windows today have handles that are epag. They are usually attached to the frame by two screws that are screwed in from both above and below.

They have a spindle bar on the back that can be of a variety sizes. This will determine how they operate (either left or right handed). It is important to determine the measurements of the handle you currently must ensure that you order the correct replacement.

The arm is fixed to the frame by two bolts, just like the Espag handle. The arm has a low projection to ensure that it doesn't scratch your blinds. This is a great option for blinds for your windows made of Upvc and you want to make sure the handle will blend with the blinds.

Cockspur handles are similar to Espag handles, but they have a nose that closes over a wedge which sits on the frame of the window. This type handle is found on older wooden and upvc windows.

On casement windows, tilt and turn handles can be operated by turning the handle or pressing on the top of the window. This allows you to open the window from inside and clean it from outside, without having to climb a ladder or walk across the garden fence. They are also a great alternative for those with limited mobility. They are an excellent method to improve security and accessibility at home.

Tips and hints

Many people will have to replace their uPVC window handles at some moment. When this happens, it's a good idea to be aware of a few tricks and tips that can make the process be as smooth as it can.

Check what type of handle is located at your residence. Based on the type of handle and the locking mechanism, it may be necessary for you to replace the lock and handle. If the roller cams and shoot bolts (espags) are jammed, or getting stuck, you'll need to replace them as well as the handle.

Fortunately, the majority of uPVC handles adhere to industry standards and are similar. This makes replacing them a relatively easy process. The first step is to remove the screws from the handles, usually pozi-drive screws. Once the screws are removed you will be able to take apart the handle.

If you've got the handle separated from the handle, it's a good idea to make an inventory of how much of the spindle is protruding from the base of the handle. This will allow you to measure the length of the spindle for the replacement handle. To do this, determine the length of the square peg sticking out from the top of the handle, and use that as a reference.

This is particularly important for inline uPVC windows handles, as they are always straight and will only open left or right. They won't work in the middle. It is a good idea if you are not sure what type of handle you have at your home to borrow a handle and check out how it works.

Another excellent method to figure out what handed the uPVC window handle is to look at the way the handle moves when it is operating. Handed handles can turn either clockwise or anti-clockwise. If you aren't sure you are, ask someone else to open the window using the handle and observe what happens.

Take a measurement of the spindle

Choosing the correct replacement handle for your windows could be a challenge as not all handles are identical in size. It is crucial to measure the spindle accurately when installing a new handle. This will ensure that the handle fits. There are many different kinds of uPVC window handles and they work in different ways, so it is vital to know the type of handle you have and the type of locking system.

The spindle of the Espag handle is a part that extends from the rear of the handle and then into the lock gearbox within the window frame. When you turn the handle, it then turns the lock in the gearbox and opens the window. They are usually used on uPVC casement windows and they can be locked with keys to give extra security.

Cockspur handles are usually found in older double-glazed uPVC window frames. They are characterized by a "nose", which is secured by a wedge-shaped striker block. They are also relatively simple and they can be locked using keys. It can be more difficult to replace these handles because they aren't as common as the handles with espagnolette.

If you have a tilt and uPVC Replacement Window Handles turn uPVC window then you will require a particular type of uPVC replacement window glass handle with an additional locking mechanism. The handle will tilt the window and allow it to be rotated around to fully open it. You should select an opening handle that has a spindle of at least 55mm in order to be able to reach the window frame.

You can follow the same procedure to remove and replace this type of uPVC handle, upvc replacement window handles however you must be careful when unscrewing the old one. It may be necessary to open the window a bit wider than usual to access both screws that secure it to the frame. After you have installed your new uPVC handles and verified that they are in the right position, you can tighten up the screw covers and check to make sure the lock is working correctly.

Install the new handle

If you have the proper replacement handle, it will be easy to screw it into the correct position. This will require a screwdriver and may be easier with an electric one. When screwing the screws in, it is important not to over tighten the screws as this can cause the handle to break or warp.

The second step in installing the new handle is to insert the spindle. It is the part that runs through the handle and operates the locking mechanism within the window. It is crucial that the component is properly fitted because this will allow the window to be opened and closed securely.

There are a myriad of different kinds of uPVC handles. There are several types of uPVC window handles.

Espagnolette Handles - these are handles that are inline and can be used to tilt and turn windows to open the window replacement panes.

Cranked Espagnolette Handles - these are similar to the inline handle, but feature a curved design that is useful for windows in difficult-to-access locations.

Tilt and turn handles These are used to operate the opening and closing mechanisms for tilt and turn. They also move windows.

The majority of uPVC window frames are fitted with these. They are commonly referred to as 'Bay Windows' in the UK.

It can be frustrating when your uPVC handle breaks. There isn't any need to replace the entire uPVC window because of a broken handle. There are many easy steps that can be taken to repair and replace a damaged uPVC window handle.

Fixing your broken window handle quickly by identifying the type and measuring the spindle. When working with tools and windows it is essential to put safety first. However, this is a relatively simple task. It could mean the difference between a safe and secure home or a window that is easily opened. Bridgewater Glass is the place to visit if you have any questions or need to speak with an expert about replacing your window handle. We have a team of highly experienced and knowledgeable experts who can assist with any issues you might be having.