Double Glazed Window Repair

The majority of double-glazed windows come with a guarantee, and it's worth checking what it covers. In general, it covers problems with the window hardware such as hinges and locking mechanisms - in the first 10 years.

A break in the seal is usually the reason for mist to form between your glass windows. This should be addressed immediately to prevent damp or mould growing within your home.

Condensation Between the Windows

If condensation appears between your windows, it is an indication that the sealing in the insulating gases has failed. This is a serious problem that needs to be addressed immediately, particularly in the winter months when humidity levels are at their highest. This can also cause damage to sills, sealant and mould.

Ideally double-glazed windows shouldn't experience condensation between the panes. This can be caused by high humidity or a very cold snap. Fortunately, it is repairable without having to replace the entire window. A professional can drill tiny holes in the glass and spray the inside of the window with a special cleaning solution. The water is then removed from the window and an anti-fogger is installed to stop the build-up of moisture in the future.

Condensation can also happen between the windows as a result of air leakage, or other causes outside the window. In this scenario, it may take longer for the moisture inside the window to accumulate, because the air must be sufficiently warm to evaporate the water molecules. In these instances it is best to replace double-glazed windows rather than attempt to repair the sealed units.

A double-glazed windows is made from three or two pieces of insulated glass held together by a frame made of metal. The gap in the middle of the window is filled with a non-toxic insulating gas like argon or krypton, and then sealed tightly. The seal prevents the gas used to insulate from escaping and also prevents moisture and air from entering through the gap.

As windows age, seals may get damaged and allow moisture to escape between the glass panes. It is important to recognise when the seals are leaking and this means that the double glazing isn't functioning as efficiently as it used to. This could result in lower energy efficiency, increased heating bills, damage to the property, and the possibility of condensation between the windows.

Mist

If you have condensation on the outside of your windows this is totally normal - it indicates that your double glazing is in good working order and retaining the heat inside your home. The condensation occurs because the air outside is warmer than the glass, and then reaches the dew point of the window before the air inside. This is one of the major benefits of having good quality double glazing.

If you see condensation on the inside of your window, this could be an indication of a ventilation issue within your home. This is because the excess moisture isn't going anywhere and ends up on your window or in carpets, furniture, and in other areas around your home. This can be avoided by having it inspected by a professional and making sure that there is sufficient fresh air in the house.

Another reason for mist on double-glazed windows is because the seal between two glass panes has broken. This could be due wear and tear or chemical cleaning solutions being used. If this is the case, replacement handles for upvc windows the best option is to have the windows repaired as soon as possible.

A professional repair of your windows will ensure they remain fog-free, free of condensation and free of misting. It's also less expensive than replacing them entirely and will help you save money on your energy costs.

A FENSA-registered window installer can provide you with a price to repair or replace your double-glazed windows. Upgrade your old windows to energy efficient ones that are A-rated in the event that they are extremely old.

It is best to keep copies of any warranties and agreements with your window installers. It can be helpful in the event that you have any future problems with your windows. You can contact your window fitters and resolve the problem. This is better than ignoring the problem and causing further problems in your home.

It is difficult to open or close

When double glazed windows become difficult to open and close it isn't just annoying, it can lead to higher energy bills because of the loss of heat and draughts. It can also pose a security risk, especially when the locks aren't working properly. You should fix any double-glazed doors and windows in the earliest time possible.

If you are unable to open your window and have tried the most basic of solutions such as using a screwdriver to prise it open, or tapping the frame using a sharp object, the issue might be more serious. The window could have moved and needs to be re-set or there could be a gap between glass and frames. In either case you should contact a double glazing repair expert to ensure that the repairs are completed correctly and to prevent further problems.

It's not uncommon to find upvc window handle replacement window replacement panel for upvc door handles for upvc window handle replacement windows (click for more) and replacement lock for upvc door mechanisms to get stuck or hard to operate particularly when they're old and worn. It is usually caused by the accumulation of grease or dirt in the handle. This is easily fixed by cleaning it using a upvc window locks cleanser. If this doesn't work, you can try tapping the uPVC using a screwdriver. Be careful not to damage either the handle or window handle mechanism.

If this does not resolve the problem then the window may have to be replaced, since it is likely that the hinges aren't properly aligned, or the locking mechanisms are damaged. In this situation, consult a specialist UPVC window repair expert.

David The Window Wizard is a specialist in double-glazed door and window repairs, including fixing a double-glazed window that has jammed or been locked shut. He has extensive experience with changing old window mechanisms to modern ones. He can often save you the cost of replacing the whole window. For more information or to schedule an estimate, call or email today.

Warping

Double-glazed windows can be the ideal way to cut down on energy in your home. They consist of two separate panes with a spacer, gas or air between the panes. This creates a seal to keep cold air out and warm air inside. In time, however, these windows may be damaged or broken and require repair. Fortunately, the majority of repairs are simple and can be completed without the expense of replacing the entire window.

One of the most common issues double-glazed windows face is warping. This occurs when the windows begin to bow, bend or twist, which may alter the strength of the window as well as its insulation capabilities. Double glazed windows should be properly installed and maintained to avoid this problem.

If your double-glazed windows are beginning to swell, it's crucial to get in touch with a specialist immediately to prevent the problem from getting worse. They will be able to examine your windows and identify the reason for the warping. They will employ special tools to fix your problem and ensure that you windows are sealed properly.

Water vapour can trigger this issue because it can accumulate between the windows over time. This can be caused by various factors, including weather conditions, humidity levels and temperature variations. To resolve this issue the expert will drill out a small hole to let the moisture out. They will then use a cleaning agent to clean the glass and then apply an adhesive to protect it from moisture in the future.

In the alternative, if your windows aren't able to be closed or opened, this could be a sign of a problem with the mechanism or hinges. Before calling an expert to resolve the issue, it's recommended to lubricate these parts. This can often resolve the issue and reduce your need for replacements. If your windows are quite old or don't provide the insulation you would like to see It is generally better to replace them.