Ghost 2 Immobiliser Problems

Designed to protect vehicles from hacking and key cloning, The Ghost 2 immobiliser is a discrete device that is able to be installed without damaging your vehicle. It prevents you from starting your car unless you have entered the correct sequence of buttons in your vehicle. It is similar to a mobile password.

Stop/Start

Ghost immobilisers stop vehicles from being stolen by stopping the engine from running until it is issued the correct PIN code. This is accomplished without any modifications to the vehicle and is completely undetectable by thieves. The unit connects directly to the ECU via the CAN databus in order to disable a vehicle. This is the same system the ones used by car manufacturers for years. However, thieves cannot escape it using a new key, or key relay technology, like they can with factory-installed systems.

Ghost is compatible with any vehicle that has an engine, which includes motorhomes, cars, vans and caravans as well as bikes. The same system can also be used on electric cars. It's a great alternative to wheel clamps and steering wheel locks.

When the Ghost is activated, it will disable all buttons on your car, preventing the ignition from being started without a PIN number. You can enter the code by hand or using the Android or Apple app. If the wrong code is entered, the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great way to discourage thieves. If the vehicle is unable to be started the thieves will be able to move on.

The Ghost is tiny, weatherproof device that can be concealed in the most difficult to reach areas of your vehicle. It is incredibly easy to install, taking an average of 20-30 minutes per vehicle. It is also simple to remove if you decide to change vehicles, or to give it to an auto repair shop or valet parking. It is an TASSA (Tracking and Aftermarket Security Systems Association) an insurance-approved system that is recognized by certain insurance companies. It also comes with an emergency Pin Code override and features a Service/Valet Mode that can be activated using the application's button or by using your key fob.

Disarm

Ghost immobilisers are not mechanical devices to prevent theft that can be removed, are hidden inside the vehicle. Even if they were discovered, thieves would not be able to start the car. They are nearly impossible to bypass or hack. A ghost immobiliser installation near me immobiliser is able to prevent key cloning as well as signal jamming and devices spoofing. These are the methods thieves employ to gain access to vehicles with standard immobilisers.

The immobiliser transmits a code to the ECU. If the wrong code is received and the vehicle is not started because the engine won't start up. It is possible to disable a ghost immobiliser using a software tool, but it's very difficult and time consuming to accomplish this. Only an authorized installer can install and use the software.

The ghost 2 immobiliser installation immobiliser is a tiny device that is tucked away in the vehicles wiring loom and is inaccessible to the naked eye once installed. It does not appear on diagnostic systems. There are no LED indicators, and it doesn't communicate with the engine through the OBD port. It communicates silently through the CAN data circuit.

The system will prevent the vehicle from starting unless it receives a user defined PIN code sequence. This code can be entered using buttons on the steering wheels or door panels, or the centre console. This is a more secure method of protecting your vehicle since it doesn't require keys or a remote control.

Ghost also comes with a service mode that can be activated via the mobile application. This allows you to give your keys to someone else to use for service or valet parking, without needing to enter an arm-disarm sequence.

No matter if your Ghost is in service mode or not you should not attempt to remove the system by yourself because it could affect your engine and cause damage. It is recommended to speak with an installer certified by TASSA who will safely and correctly remove the system. Our latest GHOST immobilisers come with a unique fingerprint QR sticker, which is hidden in various parts of your vehicle. They are connected to our security register. If the system is removed and then is sold on the blackmarket, this will allow you to trace the owner of the system.

Anti-Hijack

The anti-hijack function is an essential feature of the Ghost Immobiliser 2. This is a sophisticated key that shields your vehicle from theft. If the ignition switch is switched to on, and the vehicle is stationary for 30 seconds and the Ghost system will stop the engine and turn on the hazard lights on. This gives the driver or passengers time to press a security button (depending on the vehicle) before the system reactivates and the engine is again allowed to begin.

In contrast to other systems that simply stall the engine when the ignition is switched to on The Ghost system uses a special controller and timer unit that will close the valve that cuts off fuel in the event that it is activated within a set period of time, even in the event that the ignition is switched on! The delay time must be long enough for the owner of the vehicle to drive away and stay a safe distance from the car that it is stuck before the system can be activated.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it also comes with an extra security level that blocks common hacking techniques employed to gain access to modern vehicles, such as relay attacks keys range extending, relay attacks and ECU swapping. This is due to the fact that the Ghost system communicates in a quiet manner and doesn't emit any signals that could be picked up by thieves using RF scanning or code grabbing technology.

The Ghost system also comes with the Service/Valet mode that allows your vehicle to be temporarily re-started and driven without the requirement of PIN codes. This is ideal for parking your car and need to leave it for a short period of time, such as for example to put items in the boot, open a garage door. The system will end service mode according to speed and duration or via the simple PIN code input process, giving you complete peace of mind that only YOU are able to utilize your vehicle!

Keyless Entry

Many consumers are now looking for extra security measures due to the growing trend of car thefts using contactless technology. This is especially true for those who invested time and money in customizing their car or own expensive cars. Add-on immobilisers are a great way to prevent this kind of theft since they prevent your vehicle from starting until correct pin code is entered, along with your key fob.

Immobilisers are designed to impede the various circuits in a vehicle, including ones that control the starter motor and the fuel pump. They can also disable the car alarm to attract attention and ward off potential thieves.

These devices communicate with the engine control unit (ECU) through the CAN data circuit and they stop a burglar trying to get around it by putting in a new ECU or using a key programmer. These immobilisers are put in place in a discreet manner and leave no trace on your vehicle. They are also not detected by sophisticated tools used by thieves.

The Ghost immobiliser differs from other systems that require the driver to carry tags or an app. Instead, you can choose your personal pin sequence by pressing the pattern on your steering wheel, door panel, and centre console. The pin can be easily changed and makes the device as secure as a credit card. It is also more difficult to crack since it requires as many as 20 presses.

Ghost also has a Valet/Service mode, which permits users to deactivate it when you are going to surrender your vehicle for valet parking or service. This allows the system to operate within parameters, such as a 30-mph speed limit. It can then be reactivated using the original key or the key that corresponds to the entry code.

Installed by our certified installers, it is the most secure and effective aftermarket CAN-immobiliser that is available. It is also fully certified by Thatcham for insurance purposes. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels as well as an ISR contact card containing your unique QR code as well as a secure emergency code which you keep in the wallet/purse of your vehicle.