Ghost 2 Immobiliser Problems

Designed to protect vehicles from key cloning and hacking The Ghost 2 immobiliser is a discrete device that can be fitted without damaging your car. It stops your vehicle from starting until you press a specific sequence of buttons within your vehicle similar to a password on mobile phones.

Stop/Start

Ghost immobilisers protect vehicles from being stolen by preventing the engine from running until it is issued the correct PIN code. This is accomplished without altering the vehicle, and is largely undetectable by thieves. The unit communicates with the ECU via the CAN data bus to disable the vehicle. This system is like the one automobile manufacturers have used in their cars for years, however, the thief can't add a new key or use key relay technology to bypass it, as they can with factory fitted systems.

Ghost is compatible with any vehicle that has an engine, including motorhomes, cars, vans and caravans as well as bikes. The same system can also be used on electric cars. It is an excellent alternative to locking the steering wheel and wheel clamps and can be installed with little effort.

When the Ghost is armed it will block all the buttons in your vehicle and prevent the ignition from being started until a PIN code has been entered before. You can enter the code by hand or using the Android or Apple app. If a wrong code is entered, the app will display an indicator light and the Ghost will not allow the vehicle to start again. This is a great method to deter thieves. If the vehicle cannot be started, they will move on.

The Ghost is small weatherproof device that can be hidden in the most difficult-to-access parts of your car. It is extremely easy to install and takes an average of 20-30 minutes per vehicle. It is also easy to remove should you choose to switch your vehicle or hand it in for valet parking or service. It is an TASSA (Tracking and Aftermarket Security Systems Association) an insurance-approved system, which is recognized by some insurers. It also has an emergency Pin Code override and features the Service/Valet Mode which can be activated using the application's button or by using your key fob.

Disarm

Unlike the mechanical anti-theft devices, which are able to be removed and reinstalled, ghost immobilisers are concealed and integrated into the vehicle. They are nearly impossible to hack or bypass and even if discovered, a burglar cannot start the engine. ghost 2 immobiliser review immobilisers are able to prevent key cloning and signal jamming and devices spoofing. These are methods that thieves employ to gain entry into vehicles equipped with standard immobilisers.

An immobiliser works by sending an instruction to the ECU (electronic control unit). If a wrong code has been received and the vehicle doesn't start since the engine won't start. While it is possible to disable the ghost immobiliser with software, this would be very time-consuming and difficult. The software must be installed and used by a authorized installer.

The Ghost immobiliser is a small system that sits within the wiring loom of your vehicle and is invisible to the naked eye once installed. It doesn't show up on diagnostic systems. There are no LED indicators, and it does not communicate with the engine through the OBD port. It communicates in silence via the CAN data loop.

The system will prevent the vehicle from starting unless it is able to receive a user-defined PIN code sequence. This can be entered using buttons on the steering wheel or door panels, or on the centre console. This is a more secure method to safeguard the car because it doesn't need the use of a remote or key fob.

In addition, Ghost also has the option of a service mode that can be activated by using the application on your mobile phone. This lets you give your keys to someone else to use for service or valet parking, without the need to enter a disarm sequence.

If your Ghost is in service mode or not you should never attempt to remove the system by yourself because it could affect the engine and cause damage. It is recommended to speak with an TASSA-certified installer who can safely and properly remove the system. Our most recent GHOST immobilisers have a specific fingerprint QR sticker, which is hidden in different parts of your vehicle. They are linked to our security register. If the system is removed and then sold on the blackmarket it will be able to trace the original owner.

Anti-Hijack

The anti-hijack feature is an essential feature of the Ghost Immobiliser 2. This is a sophisticated key that guards your car from theft. Whenever the ignition switch is switched to on and the vehicle is stationary for a period of 30 seconds, the Ghost system will automatically stall the engine and turn on the warning lights on. This gives the driver and passengers enough time to press the secure button before the system is reactivated.

Contrary to many other systems that simply stall the engine once the ignition is switched on and on, the Ghost system is based on a specific controller and timer that will close the valve that cuts off fuel in the event that it is activated within a set period of time even in the event that the ignition is switched on! The delay time must be sufficient to allow the hijacked vehicle owner to leave the vehicle and a distance sufficient from the stalled car before the system is activated.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it comes with an extra security feature that blocks common hacking techniques used to gain access to modern vehicles, such as relay attacks keys range extending, relay attacks and ECU swapping. The Ghost system communicates in a non-intrusive manner and does not emit signals that could be detected by thieves with RF scanning or code-grabbing technology.

The Ghost system comes with an option for service or valet mode that allows your car to be temporarily started and driven without the requirement for a PIN code. This is great when you park your vehicle and need to leave it for a short amount of time, for example, to store groceries in the boot, or open a garage door etc. The system will exit the service mode according to speed and time or by a simple PIN code input process. This gives you total assurance that only you can drive your car!

Keyless Entry

Many customers are now seeking additional security measures because of the rising trend of contactless car theft. This is particularly relevant for those who have invested time and money to customise their car or own expensive automobiles. Immobilisers with add-ons can be a good way to prevent this type of theft as they can prevent your vehicle from starting until the correct pin code has been entered, along with your key fob.

Immobilisers are made to block various vehicle circuits such as those that control the starter motor and fuel pump. They also are able to shut off the car alarm in order to draw attention and scare off any potential thieves.

These devices communicate with the engine control unit (ECU) through the CAN data circuit. They also they stop the thief trying to bypass it by putting in a new ECU or using a key programmer. The immobilisers can be installed in a discreet manner inside your vehicle, leaving no marks and are completely inaccessible to the tools high-tech thieves employ.

As opposed to other systems that require a particular application, or a tag to be carried on the person of the driver the Ghost immobiliser can only be deactivated by pressing a sequence of existing electronic buttons on your steering wheel, door panel, and centre console, allowing you to select a customized pin sequence. The pin can easily be changed to make the device as secure as a credit card. It can also be more difficult to break because it requires up to 20 press.

Ghost also comes with a Valet/Service mode, which allows you to disable it if you intend to hand over your vehicle to valet parking, or service. This allows the system to operate within the parameters like a 30-mph speed limit. It can be activated using the original key or corresponding entry code.

This makes it the most efficient and secure aftermarket CAN immobiliser available on the market and is fully insurance approved by Thatcham as an optional accessory for your car when fitted by one of our accredited installers. The ghost 2 immobiliser reviews 2 immobiliser is also equipped with six QR fingerprint labels and an ISR contact card that contains your unique QR code and a secure emergency code that you keep in the wallet/purse of your vehicle.