Repairs to uPVC Windows

uPVC windows are a great choice for window repair modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing everything you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into old frames very easily. If windows with double glazed window repairs panes are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this case it is essential to purchase plastic spacers to help the new pane fit into the window frame.

If you plan to try to remove the glass panes yourself it is crucial to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.

After the glass has been removed and the glass is removed, it's a good idea to cover the gap with clear packaging tape or duct tape to stop water and drafts from getting into the home until a professional can come out and fix the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may think about a security door that has an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sliding. A window repair that is sagging can cause problems with light, draughts, and even security. It is crucial to act immediately if you realize that your uPVC windows are sagging.

To fix a Window Repair that is sagging you can try repositioning the hinges. First, you'll need to open the windows to get at the frame. You can then unscrew both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you're happy with the fit, you can tighten the screws until they stay in place.

If you cannot reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry which causes their tightness to decrease. If this happens, it's crucial to replace the seal as soon as possible to ensure your uPVC windows are watertight and secure from draughts.

uPVC handles could also loosen. Often it is due to screws that have come loose over time. However, it can also happen because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and then perform an initial fitting. The corners of the sash need to be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original the position it was in.

3. Water Leaks

It is crucial to act if you awake each day to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be done by any DIY expert. Depending on how serious the issue is, the old caulking may have to be removed. It is crucial to remember that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce your energy efficiency.

Verify that the drainage holes do not have debris in them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are another sign of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed glass it is more likely the problem is related to the seal, not the frame. It is also possible to be fixed by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with a breeze it could be the hinges that are at fault. They can be easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. The process of replacing a hinge on a window is an easy process but it can be easier with someone else to assist in holding the frame up.

Verify that the uPVC hinges open and close in the right direction. This can be done by looking for the arrow on each hinge, this indicates the direction in which the window should open.

The problem can be caused by opening the window improperly or due to a poor installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to provide suggestions.

It is also essential to ensure that the hinges are lubricated on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It can also lower the chance of windows sticking and prevent corrosion. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges, also because of wear and tear, can become misaligned, this will cause gaps to develop where the sash joins the frame. If they are beyond repair, it may be necessary to have them realigned. Second, the interlock can also become misaligned. This is located on the hinge's side, and might require to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or window Repair be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and decrease the possibility of draughts.

Another, and most effective ways to cut down on the draughts in your home is to use a draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be positioned on top of your windowsill. They will help stop cold air from entering and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it may be more cost-effective to simply replace them rather than repair them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional immediately.