Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not rust or rot.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the old frame very easily. If you have double-paned windows that are held together by internal beading, it is difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled.

It's a good idea to cover the gap with tape after the glass has been removed. This will keep drafts and water from entering your home until a professional comes out to fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap is large, you may want to consider using an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, over time, they may be afflicted by a variety of problems including sagging. A sagging window in uPVC can cause issues with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window so that you can get to the frame. Then, you can remove the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and upvc window Repairs check for fitting. If you're satisfied with the fit of the window, you can tighten screws to secure them in place.

If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also loosen up. Most often, this is caused by screws that have come loose over time. However, Upvc Window Repairs it can be due to the fact that the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. You'll first need to close the window and perform an initial fitting. The corners of the sash must align with the casing joint. If it isn't then you can use the screwdriver to loosen the handle. Then, turn the mechanism back into place.

3. Water Leaks

It is important to take action if get up each morning to find a smoky wall and floors that are wet. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on how severe the issue is, the old caulking may have to be removed. It is important to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more severe instances, you may need to replace the window.

Other indicators of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double glazed window repairs-glazed glass, it is more likely that the issue is with the seal than the frame. Again this can easily be corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with ease, it may be the hinges that are at the fault. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and like any mechanical part they will wear out over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier to do if you have someone to help hold the frame in place.

Make sure that the upvc window repairs near me hinges open and close in the correct direction. This can be done by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.

The issue could be caused by opening the window improperly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photo on our website. We will be happy to give you suggestions.

It is also important to grease the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. First, the hinges due to wear and tear may become displaced, which can cause a gap to form between the sash and the frame. If they're beyond repair, it could be necessary to have them realigned. In addition, the interlock could be unbalanced. This is located on the hinge side and might require to be cleaned. In certain instances it might be necessary to replace these.

The next most common cause of draughts is the window seals. These can become worn down or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, this will help to regulate indoor temperatures and again will reduce the possibility of draughts.

Another method of reducing drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They can help block out cold air and keep your home warm and cosy!

Your windows made of upvc will remain a great source of insulation and security for your home with regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and they may reach the point when it's more economical to replace them than repair them. If you are experiencing issues with your Upvc window it is recommended to speak with an expert as soon as you can.