Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to decay or rust as aluminum and timber.

It is important to clean and oil UPVC windows and doors on a regular basis. This will reduce costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause significant damage to your home and may even be fatal. It is crucial to take the time to ensure that you are doing everything you can to ensure that your windows are in good shape.

Single-pane windows are fairly simple to replace and generally fit into old frames very easily. If windows with double panes are held together by internal beading, it will be difficult to remove and replace the old panes. In this case, it is necessary to purchase plastic spacers to make sure that the new pane fits into the window frame.

If you are going to try to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any shards will fall on the fabric instead of landing on the floor, where they could be trodden under and cause further damage.

Once the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you may want to consider using the security door with an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they are susceptible to a range of issues like sliding. A sagging window in uPVC can cause problems with light, draughts and even security. It is crucial to act immediately if you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try repositioning the hinges. To do this, you'll have to open the window to access the frame. Then, you can remove the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the fitting. If you're satisfied with the fit, tighten the screws to ensure that they remain in place.

If you cannot reposition the hinges, you could need to replace the seal. Over time rubber seals can lose their elasticity and become dry and cause them to loosen. If this happens, it's important to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles may also loosen. Often, this is caused by screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and then perform an experiment to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle, and then return the mechanism to its original its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be completed by any DIYer who has the ability. Depending on how serious the problem is, the old caulking may have to be removed. It is essential to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled correctly so that it drains away from the window. In more serious situations, you may have to replace the local window repair.

Mold spots and rotten sills are other signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to keep in mind that if the leak is coming from between the glass of your repairing double glazed windows-glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it opens in a breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component hinges are prone to be damaged over time. It is very easy to change a window hinge, but it's easier if someone helps you to hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. You can check this by looking for the arrows on each hinge. This indicates the direction in which the window should open.

Window hinges that aren't working properly could be caused by improperly opening the window a certain manner or because of inadequate installation at the factory. Sending us a photo through our website can often resolve the problem. We are always happy to give advice.

It is also crucial to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a great method to accomplish this. We recommend using the lubricant that doesn't contain solvents, such as 3-in-1 Multi-Purpose oil. Regularly lubrication will help the window to operate and close more easily. It can also reduce the risk of a window sticking and prevent corrosion. This should be done at least once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by various factors. The hinges may also become unbalanced due to wear, causing gaps between the frame and sash. If they are damaged beyond repair, it could be required to realign them. The interlock, which is located on the hinge of the window, can also become misaligned, again it is feasible to give them a good clean, but in certain cases, it may be necessary to get them replaced.

The next most common cause of draughts is the window seals, window repairs these are prone to wear or damaged over time and will allow air to escape through these gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures, and reduce the possibility of draughts.

One of the most effective ways to reduce drafts is to use an draught excluder. These are typically made of fabric which are filled with a sort of filler and can be placed on the top of your windowsill. They can keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually become worn out, and it may be cheaper to replace them than to repair them. If you are experiencing issues with your Upvc window, it's best to consult a professional immediately.