Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum and timber.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. If you have double glazed window repairs near me-paned windows that are joined by internal beading, it is difficult to remove and replace the panes that were previously in use. In this case, you will need to source some plastic spacers that will help the new pane to fit correctly into the window frame.

If you plan to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes, so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled under.

Once the glass has been removed from the window, it's best to seal the gap with clear packaging tape or duct tape to stop drafts and water from entering the property until a professional is able to come out and repair the window. It also acts as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action when you discover that your uPVC windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need to open the window to get to the frame. With a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and verify the fitting. If you are happy with the fit of the window, tighten the screws to keep them in the right position.

If you are unable to move the hinges, you may have to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to lose their tightness. It is important to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have been removed over time, but it could also be due to the mechanism of the handle getting worn out. It's relatively easy to repair a loose uPVC handle. The first step is to close the window and then perform an initial test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

If you awake to wet floors and window repair damp walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a fairly simple fix that can be done by any competent DIYer. Based on the severity of the problem the old caulking might need to be removed before a new layer of caulk can be put on. When it is time to uPVC repair, it is important to avoid over-caulking. This will only make your window harder to clean and reduce its energy efficiency.

It is crucial to make sure that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more severe situations, you may have to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the home.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is related to the seal, not the frame. This can be easily repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or Window Repair are loose and blow open in a breeze it could be hinges at the fault. They can be replaced by any competent DIYer and can usually be completed in a matter of minutes.

Like all mechanical parts, hinges can be damaged over time. It is essentially a simple process, but it's simpler if you have someone to help hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the right direction. You can check this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to improper installation in the factory. This issue can be fixed by sending us a photo on our website. We will be pleased to offer you advice.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is an ideal way to do this. We recommend using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 and other solvent-based lubricants should not be used since they can damage your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by different factors. Firstly the hinges, again due to wear and tear may become displaced, which causes gaps to develop where the sash meets the frame. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it might be necessary to get them re-aligned or replaced. The interlock may be misaligned. This is located on the hinge side and might require to be cleaned. In some instances it is possible to replace these.

The second most frequent reason for draughts is Window repair seals, these are prone to wear or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help control indoor temperatures and decrease draughts.

The last way to reduce draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. They will help block out cold air and keep your home warm and cosy!

With a little maintenance and repair windows made of upvc will provide excellent security and insulation for your home. It is important to remember that all windows will eventually get worn out and it may be more cost-effective to replace them than to repair them. If you have any problems with your window made of upvc you should consult a professional as soon as you can.