UPVC Window Repairs

Upvc windows are able to reduce heating costs and are energy efficient. However, as they get older, problems can arise which need repair. This could include damaged hinges, handles or locks.

DIY enthusiasts can repair wooden windows relatively easily. It's less expensive than buying a brand new window.

Cracks

Cracks and fractures can pose a serious problem. Windows that are not repaired can lead to water intrusion, less effective barriers to cold weather, or even structural damage. Find a local builder who specializes in the repair of uPVC frames. They should have the required skills and experience as well as the right equipment to ensure the best results. This will ensure that your crack is repaired before it worsens and you don't need to replace your window glass or window unit.

There are numerous home solutions that can be used to repair small cracks in the glass. Masking tape and superglue are two of the most popular products to hold cracked glass in place for a short period of time. For deeper cracks the tape may have to extend beyond the crack on both sides to get the optimal results.

Additionally, two-part epoxy can be used to fix broken or cracked glass. Most hardware stores offer this product at around $10. Ensure that your workspace is prepped before mixing the epoxy and make sure you have the right tool for the job, for example, a soldering tool.

If you find that your upper or lower sash isn't lifting it is most likely due to the cords attached to the sashweights are damaged. It's a simple repair that can be made using the ladder and a flat-head screwdriver. A drip cap that is rotten can be easily replaced at home. The drip caps that are not rot-free are readily available at many home centers and can be nailed and put in place using caulk. Check that the glass of double or triple-paned window isn't broken. This is because the gasses that are leaking out between the panes contribute to improving energy efficiency. They should be retained and not released.

Water Leaks

If your uPVC windows are leaking, it can ruin the interior of your home and result in costly repairs. Water leaks can also cause structural damage to your home, as well as mold growth. To minimize damage, it's important to repair any issues caused by windows that leak as soon as you can.

A damaged sealant around window frames is a frequent cause of leaks. Using silicone caulking can help improve the condition of the seal back to normal and stop water leakage. It's also important to check for gaps and cracks around the frame as well as in the stone or brick walls surrounding your windows.

A blocked drainage hole or faulty flashing are the other two common causes of leaking windows. It's important to check that the drainage holes are clear and free of obstruction, particularly after a heavy rainstorm. It is also important to examine the flashing around your window to ensure that it's well-sealed.

It's also crucial to ensure that your drip cap does not have any rot or is missing. A rotten drip cap or one that's missing can allow water from above to seep into your window and cause structural damage. Replacing a leaky drip cap is not a difficult task. It's as easy as buying the new one and nailing it into place.

It's an excellent idea to have your windows tested for water-tightness with a professional. They can employ a specific tool to measure the water-tightness and strength of your windows and make sure they are in line with industry standards. If your windows fail the test, they will need to be replaced. It's a costly repair however it's worthwhile to ensure the safety and comfort of your family.

Sagging

If your windows don't close properly, it could lead to a number problems, including condensation, drafts and an increase in your energy bills. It could be a sign that the windows weren't properly installed or the sealant is no longer effective. Fortunately, there are some ways to fix the problem.

The first step is to prepare a workspace in a room with plenty of natural light to fix your window correctly. Start by laying down newspapers or an old blanket to shield the flooring from any splinters or drips from the windows as you work.

You should also use a white cloth which has been submerged in a solution containing water and detergent. This will prevent any stains of color from appearing on your windows. Mark the the hinge channel on your uPVC window when you are ready to begin working. Then remove the channel from the frame and fill in the screw holes with epoxy (for uPVC windows) or wood filler (if your frames are constructed of wood). Make sure you scrape the filled hole smooth before it sets.

Reinstall the hinge channel after the holes have been filled. Be sure to center it on the window jamb and drill the new screwholes approximately a quarter-inch from the original locations.

Then, measure the spindle protruding from the underside of your handle. You can either order an replacement or take it to a hardware shop to find a suitable replacement. Remove the setscrew from the shaft. Flatten it to allow the set screw to lock onto the shaft. Now your uPVC window should shut smoothly.

Broken Hinges

If your uPVC window hinges have broken or aren't functioning properly, you will find it difficult to open or close the window. This could create an issue with security and stop your home from remaining warm or cool. You can easily get a new hinge for your uPVC window. However, it's important to make sure you have the right hinge for your windows.

This is because the hinges must be the same size to fit into the frame of the window. The most popular type of hinge used in Upvc windows is an 18mm or 15mm upvc repair window hinge. There are also special hinges for wooden frames. Choosing the correct window hinge for your windows can aid in avoiding common problems that many homeowners encounter with their windows, such as not closing properly.

There are many reasons why the hinges on your windows have become slack or stiff. The hinges might not be properly tightened. You can test this with a screwdriver. locate the friction screw on the other side of the hinge, and then loosen it. Then, you can adjust it by turning it in either direction until you get the desired result.

Call Preston Glass Fix if your UPVC window's hinges aren't working properly. We can provide a quick fix. Our technicians will examine the condition of your window hinges and recommend the best solution for you. We can repair or replace your window hinges, retension them or install new lock mechanisms to ensure your UPVC Windows are secure and safe.

Locks that aren't working

UPVC window mechanisms and locks are an essential element of home security. They make it very difficult to open a window without breaking into the house. It can be a hassle when a lock malfunctions, but you don't have to replace the entire window.

It is often an issue that is minor and could have easily been avoided by regular maintenance. We suggest that you have your uPVC window cleaned regularly as part of our yearly maintenance package in order to minimize the chance of having any issues.

Modern uPVC windows are equipped with espagnolette locks. They work by pushing the nose of the handle on a wedge block, and then turning it to close the lock. They are efficient in locking the window, however should they not be maintained correctly, over time they could begin to fail. We recommend applying WD-40 to them a couple of times a year.

If you're noticing that your uPVC window isn't opening and closing as quickly as it used to or when the lock isn't working correctly, it could be a problem with locking gearboxes within the frame. It can be difficult to access as it requires the removal of the seals that surround the frame of the window, and taking the handle off.

A locksmith that specializes in UPVC repair will be able to diagnose this fault quickly and replace the broken locking mechanism with a precise replacement. This is a fast and easy repair that can save you hundreds of dollars by not having to purchase new windows.