Ghost 2 Immobiliser Problems

It is designed to safeguard vehicles from key cloning and hacking The Ghost 2 immobiliser is a discrete device that can be installed without damaging your car. It stops your car from starting unless you press an exact sequence of keys within your vehicle, similar to a password on mobile phones.

Stop/Start

Ghost Immobilisers stop vehicles being stolen by preventing the engine from starting unless it receives the correct PIN code. This is accomplished without any modifications to the vehicle and is totally undetectable to thieves. The unit connects directly to the ECU through the CAN databus to immobilise the vehicle. This is the same system that used by car manufacturers for years. However, thieves cannot overcome it using a brand new key, or key relay technology, like they can with factory-installed systems.

A Ghost can be fitted to any car, van motorhome, caravan, or bicycle that has an engine and is compatible with all popular makes of vehicles. The same system can also be used on electric cars. It's a great alternative to steering wheel locks and wheel clamps that can be installed with little effort.

When the Ghost is armed it will block all the buttons in your vehicle and stop the ignition from being started without a PIN code having been entered first. You can enter the code by hand or using the Android or Apple app. If a wrong code is entered, the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great deterrent and if the vehicle can't be initiated, the criminal will move on to another area of.

The Ghost is a small weatherproof device that can be hidden in the most difficult-to-access parts of your car. It is extremely simple to install, taking an average of 20-30 minutes per vehicle. It is also easy to remove if you decide to move your vehicle around or give it away to valet parking or service. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is recognized by a number of insurance companies. It also has an emergency Pin Code override and features a Service/Valet Mode that can be activated by pressing a button on the app or with your key fob.

Disarm

In contrast to the mechanical anti-theft devices, which can be removed and reinstalled, ghost immobilisers are concealed and integrated into the vehicle. Even if they were discovered and stolen, thieves would not be able start the car. They are virtually impossible to bypass or hack. Ghost immobilisers are capable of preventing key cloning and devices spoofing signals and signal jamming. These are techniques thieves employ to gain entry into vehicles equipped with standard immobilisers.

An immobiliser operates by sending an instruction to the ECU (electronic control unit). If the incorrect code is received, the vehicle will not start since the engine won't fire up. While it is possible to disable the ghost immobiliser with a software tool this is very time-consuming and difficult. The software must be installed and used by an authorised installer.

The Ghost immobiliser, a small system, is hidden within the wiring loom of your vehicle. It is inaccessible to the naked eye after it has been installed. It does not appear on diagnostic systems. There are no indicators with LEDs, and it does not communicate with the engine through the OBD port. It communicates silently through the CAN data loop.

The system will not allow the vehicle to start unless it receives an input PIN code that is entered by the user. This code is entered using buttons on the steering wheel, door panels, or centre console. This is a more secure method to safeguard the car because it doesn't need a remote control or key fob.

In addition to this ghost immobiliser fitter offers an option for service that can be activated through the application on your mobile phone. This will allow you to hand over your keys to someone else for service or valet parking without entering the disarm sequence.

You should never remove the system on your Ghost by yourself, no matter whether it is in service mode. This can damage your engine. It is recommended to speak with an TASSA verified installer who can remove the system in a safe and secure manner. Our most recent ghost immobiliser installer immobilisers come with a unique fingerprint QR sticker that is hidden in various areas of your vehicle. They are linked to our security register. In the event that the device is removed and then sold on the black market, this will allow you to trace the owner of the system.

Anti-Hijack

Ghost Immobiliser 2 has a extremely useful anti-hijack feature. It functions like smart keys and is one of the most secure methods to protect your vehicle from theft. The Ghost system will automatically turn on the hazard light and stop the car's engine when the ignition is turned on and the vehicle is stationary. This gives the driver and passengers time to press the secure button before the system is activated.

In contrast to other systems that simply stall the engine when the ignition is switched on The Ghost system has a unique controller and timer that will shut off the valve for cutting off fuel 14 in the event that it is activated within an agreed-upon time even in the event that the ignition is switched on! The delay time interval must be sufficiently long to allow the victim of the vehicle to drive away from the location of the hijacking and a sufficient distance from the vehicle that is stalled before the system can reactivate.

In addition to the standard CANbus immobiliser blocking capabilities of the Ghost system, it also comes with an extra security feature that blocks common methods of hacking that are used to hack into modern cars such as relay attacks keys range extending, relay attacks and ECU swapping. The Ghost system communicates in a quiet way and does not emit signals that can be snatched by thieves with codes-grabbing or RF scanning technology.

The Ghost immobiliser london system features the valet or service mode which allows your vehicle to be temporarily started and driven without the need for PIN code. This is ideal when you park your vehicle and need to leave it for a short period of time, such as for instance, to put your items in the boot, open a garage door etc. The system will then exit the service mode based on speed and time or through an easy PIN code input process. This will give you complete security that only YOU can drive your vehicle!

Keyless Entry

With the rise of car thefts that are not involving contact numerous people are considering additional security options. This is especially true for those who invested time and money in customizing their vehicles or own expensive automobiles. An add-on immobiliser can be a cost-effective way to prevent this kind of theft since it can stop your vehicle from starting unless the correct pin code is entered alongside your key fob.

Immobilisers are designed for different vehicle circuits, including ones that control starter motors as well as fuel pumps. They also can shut down the car alarm to draw attention and scare off any potential thieves.

These devices connect directly to the engine control unit through the CAN data network. They hinder thieves from gaining access to it by installing a replacement ECU or by using key programmers. These immobilisers are installed discretely and do not leave any marks on your vehicle. They are also not detected by sophisticated tools used by thieves.

In contrast to other systems that require a specific application or tag that is worn on the person carrying it the Ghost immobiliser can only be deactivated by pressing a pattern of electronic buttons that are already present on your steering wheel, door panel, and centre console, allowing you to select a customized pin sequence. The pin can be easily changed and makes the device as secure as a credit card. It can also be more difficult to crack because it takes up to 20 presses.

Ghost also has the option of a valet/service mode that allows you to disable the system when your vehicle is going to be handed over for valet parking or services and allows it to operate within set parameters such as 30mph speed limits and you don't have to worry about your vehicle being driven in reckless manner. The system can be reactivated by using the original key or corresponding entry code.

This makes it the most efficient and secure aftermarket CAN immobiliser available on the market, and is insurance approved by Thatcham as an optional accessory to your vehicle when installed by one of our authorised installers. The Ghost 2 immobiliser comes with six QR fingerprint labels and an ISR contact cards containing the unique QR codes and an emergency code that is safe. They are all stored in your purse or wallet.