Ghost 2 Immobiliser Problems

Created to guard vehicles from hacking and key cloning, to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that is able to be fitted without damaging your car. It stops your car from starting until you press an exact sequence of keys within your vehicle, similar to the password of a mobile phone.

Stop/Start

Ghost Immobilisers stop vehicles being stolen by preventing the engine from starting unless it receives the correct PIN code. This is done without altering the vehicle, and is not detected by thieves. The unit communicates with the ECU on the CAN data bus to immobilise the vehicle. This system is very like the one car manufacturers have been using in their vehicles for a long time However, thieves cannot add a new key or use key relay technology to bypass it, as they could with factory-installed systems.

ghost 2 Immobiliser near Me is compatible with all vehicles with an engine, including cars, vans, motorhomes, caravans, and bikes. The same system is also compatible with electric vehicles. It's a great alternative to locking the steering wheel and wheel clamps, and can be installed with a minimum of effort.

When the ghost vehicle immobiliser is activated it will disable all buttons on your car and stop the ignition from starting without a PIN code. This can be done using the Android or Apple mobile app or by manually entering the code via your key fob. If the incorrect code is entered, the app will display an indicator light. The Ghost will not let the vehicle to start again. This is a great way to deter thieves. If the vehicle cannot be started, they will move on.

The Ghost is tiny weatherproof device that can be hidden in the most difficult to reach areas of your car. Installation takes between 20 and 30 minutes for each vehicle. It is also simple to remove if you choose to change vehicles, or to give it to the valet or service center parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system that is endorsed by some insurers. It also has a secure emergency Pin Code Override, and a Service/Valet mode which can be activated by pressing a button on the app or by using your key fob.

Disarm

Ghost immobilisers are not mechanical anti-theft devices that are able to be removed, are concealed inside the vehicle. Even if they were found and stolen, thieves would not be able to start the car. They are virtually impossible to hack or bypass. Ghost immobilisers are able to prevent key cloning and devices spoofing signals and signal jamming. These are the methods thieves employ to gain access into vehicles equipped that have standard immobilisers.

The immobiliser sends a message to the ECU. If a wrong code has been received and the vehicle doesn't start as the engine won't start. It is possible to disable a ghost immobiliser with an application program, but it is very difficult and time consuming to accomplish this. Only an authorised installer can install and use the software.

The Ghost immobiliser, a small device, is hidden in the vehicle's wiring loom. It is invisible to the naked eyes once installed. It is not visible on diagnostic systems. There are no LED indicators and it doesn't communicate with the engine through the OBD port. It communicates in silence through the CAN data loop.

The system won't allow the vehicle to start unless it is provided with an input PIN code that is entered by the user. The code is entered by pressing buttons on the steering wheel and door panels as well as the centre console. This is a safer way to safeguard your car since it doesn't require a remote control or key fob.

Ghost also has a service-mode that is activated through the mobile application. This will allow you how to fit a ghost immobiliser give your keys to someone for service or valet parking without entering the disarm sequence.

Whether your Ghost is in service mode or not, you should not attempt to remove the system by yourself because it could affect your engine and cause damage. It is recommended to speak with a TASSA certified installer who can remove the system safely and correctly. Our latest GHOST II immobilisers also come with a special QR fingerprint sticker that is hidden in different areas of your vehicle, these are linked to our global security register. In the event that the system is removed and sold on the black market this will connect it back to its original owner.

Anti-Hijack

The anti-hijack function is a very important feature of the Ghost Immobiliser 2. This is a clever key that shields your vehicle from theft. Whenever the ignition switch is switched to on and the vehicle is stationary for 30 seconds, the Ghost system will automatically stop the engine and turn on the warning lights on. This allows the driver or passengers time to press a hidden security button (depending on the vehicle) before the system reactivates and the engine is again allowed to begin.

Unlike many competitor systems that simply stop the engine once the ignition is switched on The Ghost system has a unique controller and timer unit which will close the fuel cut-off valve 14 in the event that it is activated within a set period of time even in the event that the ignition is switched on! The delay time interval must be sufficiently long to allow the owner of the vehicle who was hijacked of the vehicle to drive away from the location of the incident and to maintain a sufficient distance from the stalled vehicle before the system can be activated.

The Ghost comes with an additional layer of security that prevents common hacking techniques used to gain access to modern vehicles, such as relay attacks and key range extending. The Ghost system communicates in a quiet manner and does not emit signals that could be snatched by thieves using RF scanning or code-grabbing technology.

The Ghost system features a service / valet mode that allows your vehicle to be re-started and driven without the need for a PIN code. This is perfect when you park your vehicle and need to be away for a short period of time, such as for example to put groceries in the boot, or open a garage door, etc. The system will exit the service mode based upon speed and time or by an easy PIN code input process. This gives you complete assurance that only you are able to drive your vehicle!

Keyless Entry

With the rise of contactless car theft numerous customers are seeking out additional security options. This is particularly true for those who invested time and money into customising their vehicles or own expensive cars. An add-on immobiliser can be an affordable method to stop this kind of theft because it can stop your vehicle from starting until the proper pin code is entered alongside your key fob.

Immobilisers are designed to intercept the various circuits in a vehicle, including ones that control the starter motor and fuel pump. They can also disable the alarm for cars in order to attract attention and scare away potential thieves.

These devices connect directly to the engine control unit via the CAN data network and hinder thieves from gaining access to it by installing a new ECU or using key programmers. The immobilisers can be installed discretely inside your vehicle, leaving no marks and are totally undetectable by the tools that sophisticated thieves use.

The Ghost immobiliser differs from other systems which require the driver to wear an app or tag. Instead, you can choose your personal pin sequence by pressing the pattern on your steering wheel, door panel, and the centre console. The pin can easily be changed, making the device as secure as a credit card. It is also more difficult to crack since it requires as many as 20 press.

Ghost also offers Valet/Service mode, which permits you to disable it if you intend to surrender your vehicle to valet parking, or service. This allows the system to operate within the parameters such as a 30 mph speed limit. The system can be activated by using the original key or corresponding entry code.

Installed by our accredited installers It is the most secure and efficient aftermarket CAN-immobiliser that is available. It is also fully approved by Thatcham for insurance purposes. The Ghost 2 immobiliser comes with six QR fingerprint labels and an ISR contact card that contains your unique QR codes, as well as an emergency code that is safe. They are all stored in your wallet or purse.