Autowatch ghost immobiliser install II Immobiliser Review

Autowatch Ghost is the next generation in car security. It is unnoticeable to thieves and impossible for them to open the car without a specific pin code.

The system is based upon the CAN Data network of your vehicle and is silent, so it cannot be detected with standard diagnostic tools or radio signals. It doesn't require any cuts in the circuit to be installed.

What is a Ghost Immobiliser?

A Ghost Immobiliser can help safeguard your vehicle from theft by making it impossible to start the vehicle until a unique pin code is entered. It can be used on various vehicles. Unlike an immobiliser for vehicles, it doesn't need keys or fobs to operate. It is also extremely difficult to bypass or hack, and it operates in a quiet manner. This means that thieves must be quick to flee without being noticed.

It protects against key locking, signal jamming, and spoofing, all of which are methods that thieves have been using to unlock vehicles using standard immobiliser systems. The device also prevents thieves from stealing your keys by sifting through your mailbox or gaining access inside your home to steal the remote control. It can even stop them from driving away your pride and joy if they have managed to get the key, because it stops them from starting your vehicle unless they enter the code first.

A ghost immobiliser, unlike passive immobilisers that require a fob or key to be in use to activate it and is designed to be completely sealed inside the engine. It is directly connected to the CAN data circuit of the vehicle. The system creates a pin code by pressing buttons on the steering wheel or the console of your car. You will have to enter this code before the engine can start. The system can be set to an operating mode that allows your car to start and drive for short periods of time without the need for a PIN code. However, the service mode will end based on time and speed.

It is impossible to hack or bypass the system even with high-tech equipment such as code grabbing or RF scanners devices. It is also impossible to disable using an ordinary vehicle immobiliser since it doesn't transmit an RF signal like a standard immobiliser and only works by connecting directly to the CAN data circuit.

TASSA (Tracking & Aftermarket Security System Association) has now approved the Ghost immobiliser to be an insurance approved product due to its advanced technology and easy-to-install. We are a TASSA approved ghost immobiliser installer, http://www.copyoa.com, Installer and can put the device in your car to help you with insurance.

How does the Ghost Immobiliser Work?

In simple words, an immobiliser operates by stopping your car from starting if the wrong fob or key is used. This is done by sending an error code from the wrong key or fob to the ECU (Engine Control Unit). The ECU will not recognize it and your car won't start. This is why it's crucial to ensure that your vehicle is equipped with an immobiliser from an established and trusted specialist.

MotorGuard is the Midlands' most trusted vehicle security specialist and installer. We offer Autowatch Ghost immobilisers for various modern vehicles. You can rest assured your car's security will be safe from thieves who might target your vehicle.

The Autowatch Ghost immobiliser is one of the world's first aftermarket CAN bus immobilisers and safeguards your vehicle from key-cloning, hacking and theft. It is designed to be undetected by car burglars because it does not have LED indicators or key fobs. It can also be hidden within the wiring of your vehicle so that it doesn't require any additional hardware.

Once installed, it's connected to the CAN system of your vehicle and allows you to create an unique disarming sequence using your PIN code. This must be entered prior to driving the vehicle. This pin code can be as long as 20 presses long, which provides security. If you forget your pin code or if the button has broken, there is a secure emergency code that you can use. This will let your vehicle to start over again.

It is because the Ghost immobiliser cannot be manipulated or hacked that it is an effective deterrent for thieves. It is also TASSA (Tracking and Aftermarket Security Systems Association), which could reduce the cost of your car insurance.

Ghost immobilisers continue to evolve as technology advances. We recommend that you contact an Autowatch Ghost fitter as soon as you can to safeguard your pride and joy. If you're looking to purchase a brand new vehicle, or looking to upgrade your current vehicle, you can count on us to provide you with top-quality service so that you can feel confident in your joy and pride for many years to be.

Is a Ghost Immobiliser compatible with my car?

The Ghost is the world's first aftermarket CAN bus immobiliser system to offer total protection against modern-day vehicle theft. It safeguards against key hacking, cloning, ECU swapping, and more. The latest TASSA verified Ghost-II systems also provide the ability to mark your vehicle and connect to the International Security Register enabling your insurance company to confirm that you have a legitimate Ghost system in place.

Our Ghost Immobiliser prevents theft by making it necessary for an individual pin code be entered, or your smartphone to be equipped with our Autowatch Application installed. It functions as a PIN for a bank card, and makes it impossible to leave with your pride and joy without entering the correct pin or phone. Our Ghost Immobiliser System integrates into the CAN Data Network, so no wire cutting is needed and it runs quietly. It is undetectable to thieves and can't be detected by sophisticated scanners or code grabbing techniques that other systems employ.

Once the Ghost is fitted by our expert fitters, it is completely concealed and inaccessible to the naked eye. it makes use of the buttons on your vehicle, such as those on the steering wheel, door panels, and the centre console to generate an individual pin code that has to be entered before your engine can start, just like a password for the bank account. It is then connected to your smartphone using the Autowatch app, which allows you to go into a temporary "Service or Valet" mode which disables ghost for up to 30 minutes while you hand over your car for transportation or for service.

With the high level of personalisation and modification employed in today's vehicles, along with the fact that a majority of us are driving older vehicles, it's not surprising that the number of stolen vehicles has risen dramatically. It can take a long time to replace these costly and rare vehicles after they are taken. Therefore it is essential to protect your pride and joy from becoming the next target. A Ghost immobiliser is a reasonable investment that can ensure that your vehicle is secure and can even be used to retrieve it in the event that it is stolen.

Does a Ghost Immobiliser operate by cutting principle?

Ghost immobilisers work by blocking your vehicle's engine from starting until an additional PIN is entered along with your key fob. This prevents thieves from cloning keys to your car or hacking into your car's system and could encourage them to leave your vehicle alone.

Once it is fitted, your ghost immobiliser will create an unique pin code that can be as long as 20 digits through the buttons of your vehicle (steering wheel, centre console or door panels) which must be entered to start your vehicle. The code sequence must be entered each time you drive your car just as a PIN or password on credit card. This code can be easily reset by entering a number sequence in the Ghost app.

The Autowatch Ghost II CAN immobiliser also has two deactivation modes for valet and service, which allows you to temporarily start your vehicle with no access code - just like the key fob, while it is in the garage or with a valet parking provider. The immobiliser will then reactivate automatically when the car is parked.

The Ghost is unlike other security devices available on the market. It doesn't have any LED indicators, and it works in a silent manner by utilizing the CAN data network of your vehicle. It is also not prone to the same types of circuit cuts that are found in other security devices, since it does not use radio waves.

This means that it can be placed in a way that's concealed from view and obscurity and therefore, is impossible for thieves to find and be able to detect. It is also unnoticeable by sophisticated scanning tools and technology that grabs codes, which are commonly used to locate or disable security devices.

The Ghost is a premium modern CAN bus immobiliser that provides top-of-the-line protection against key cloning car hacking and relay theft. It is simple to install and is not detected by thieves. It cannot be disabled with simple wire cutting. This is why it's a must-have item for anyone who wants to protect their vehicle.