Window Repairs

Window double glazing repairs can help homeowners save money and help keep their homes warm. Window replacements may be required in the event of severe damage such as broken glass, or a broken window frame.

Other issues can be solved to prolong the life of windows. Common problems include:

Cracked or Broken Panes

It's a rock that's been that was tossed by your lawnmowers or a tree branch that has been blown by high winds, cracked windows are not just unattractive but can lead to more expensive electricity bills because the broken pieces let cold air into your home. Luckily, it's typically easy to fix windows with cracked panes.

Start by carefully removing the glass using gloves and safety glasses. You may have to use a utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the wood of the frame with a soft cloth or paper towel.

Once the area is clean then apply a waterproof silicone caulking on the perimeter of the frame. This will stop water from getting in through the crack, which could cause further damage to both the frame and the glass.

If you have double glazing near me-pane glass, cracks that are severe could damage the gas layer that lies between the panes and make your windows less efficient in insulating. If the crack is serious enough to cause damage to the integrity of the glass or if you have an inner pane completely missing, it might be time to contact a professional.

Thermal stress cracks may also occur when there's a drastic difference in temperature both inside and outside your home. The glass is then able to expand and shrink. If the cracks are on two sides of a glass, it is recommended to replace it rather than attempt to repair it.

For cracked windows that aren't yet ready to be replaced, clear tape can do a decent job of securing the crack and preventing the entry of bugs and cold air. You can even cut a piece of nylon stocking or tarp that's large enough to cover the crack and glue it in place with duct tape. This isn't a permanent solution however it can be useful in the event of a crisis and keeps cold air and insects from entering your home. If you notice cracks or blemishes on your older windows You should consult the local company to determine whether replacing the entire window is a better solution.

Rotten Wood

Wood rot is a common problem for windows. It can degrade a house's appearance and create a safety hazard. It is possible to fix rotted wood. It is first necessary to identify the cause of the wood's decay. Look for leaks on the roof and other places that water may get into the wood.

You'll then have to take off the rotten parts of the window frame. This can be done using a rasp, chisel or claw hammer. After the areas that are rotten have been cleared it is time to replace them with fresh wood. Pre-treated wood is suggested for this project, as it is resistant to rot. If you are not able to replace the wood damaged by rot, you can try using wood filler or hardener to repair the damaged area. This kind of product can be available at most hardware stores. To achieve the best results, adhere to the instructions on the product label.

After you have repaired the damaged areas of the window sill, it is essential to safeguard the area. Apply a water-resistant sealant the wood. Sikkens for instance, is a great product to apply.

It is also possible to use an epoxy filler that is two-part to shield the wood from further damage. This product is easy-to-apply and leaves a nice finish. However, it's important that you follow the directions for application on the label. Once the epoxy filler has dried, you can rub the surface of the wood. Start with a rough sandpaper then move to more smoother grades.

You don't want to expose the rotted part to more moisture. It is a good idea so, to cover the surface repaired with an oil-based primer that will protect it from water. After that, you are able to reapply the wood sealant, which is waterproof.

The W won't open

A window that isn't opening could be due to many reasons. Wood frames can warp in humid weather, the house may have settled or someone may have closed it to protect themselves. But with some patience and the right tools, all windows that are locked can be opened.

One of the most frequent reasons for windows that won't open is accumulated gunk or debris on its moving parts. Acme Glass notes that dirt and grime accumulates over time on hinges, sliding tracks and locks. Additionally, metal hardware is prone to be rusty when it comes in contact with humidity and direct sunlight. Making sure these areas are lubricated with spray grease can prevent oxidation and keep your window functioning properly.

The pulleys that raise or lower the window may become loose, or break. These parts can lose their tension and become obstructed, especially when the window is two or more stories above the ground.

If you have trouble opening a door, try using a pry-bar to gently open the door. Place a wood block on the frame to give the pry bar more leverage and be sure not to harm the window or the wood. Try using a hairdryer to dry the frame's edges for a few minutes. This will warm the wood, making it easier to move.

A faulty spring can also be the reason for windows that aren't able to lift or lower. Depending on the manufacturer of your windows, you will have to consult the manual of your owner for additional instructions.

If you've tried cleaning and lubricating the moving parts of your windows, but they aren't opening, it's probably time to replace them. Homespire Windows & Doors offers windows that are energy efficient. Don't let the windows in your home become functional to useless. A window that isn’t properly shut can expose your home to water damage and burglary. Contact our team for more information on our replacement windows and services today!