Replacement Handles For UPVC Windows

UPVC window handles come in various styles but all of them operate the same locking mechanism. To replace a uPVC window handle, take off the top screw located at the base of the handle. This will reveal two additional screws.

Then, measure the spindle to make sure the new handle is suitable. It is important to identify the type of handle you have as there are several sizes.

Inline Espagnolette Handles

Most double-glazed windows have Espagnolette handles which operate multi-point locks for improved security. The handle is operated by an 7mm square spindle which connects to a gearbox within the frame of the window. This gearbox moves the multi-locks when the handle is turned. They are available in a variety of designs, including cockspur keys, install inline and locking handles.

Our uPVC replacement handle kits are designed to make it simple to replace a damaged or defective window handle made of espagnolette. These uPVC handles come with all the necessary fixing screws and a range of spindle sizes to suit the majority of applications. They also come with key plugs, which enable them to be transformed from normal open/close to the egress and fire escape locking handles (if used in conjunction with the correct key plug).

If you are just looking for an espagnolette handle that can simply replace upvc window handle your existing window handles without changing the position of the mushroom plates, we recommend our Simplefit Inline Espag Handle with 3 Spindles. These handles are designed specifically for this purpose and they come ready to fit with a range of spindle lengths already inserted so you don't need to worry about cutting them down on site. The handles are also a good choice for new build or refurbishment projects due to their excellent value and easy installation.

Another option is our Yale Sparta 2 Inline Espag Handle that has been designed to be minimally intrusive with a reduced base height. It is part of our suited range of hardware and is available in a variety of finishes that all meet the specifications of BS EN 1670:2007 Grade 5 corrosion resistance. They have been tested for durability and are suitable for use in acidic woods and coastal environments. They are compatible with cylinder-immobiliser inserts for key-locking where required.

Cockspur Handles

Cockspur handles are typically found on older uPVC or aluminium doors and windows they are a simple latch and catch arrangement. The handle's nose is affixed to or inserted into the catch which is a wedge block made of plastic that is positioned on the window frame. The wedges are available in different sizes, so it is important to know what step height you require prior to buying a replacement handle. As a general rule windows made of uPVC tend to utilize a 21mm step and aluminium frames usually have a 9mm handle step.

A cockspur handle is locked using a key, ensuring additional security for your home. The lock is inserted to the handle with spindles, which fit into the handle through the hole for locking (also known as a backset). The spindle has a 7mm square cross-section and is used to either open or close the window.

It is essential to ensure that the new cockspur handle is the same height as the original. Usually, this measurement is taken from the bottom of the spur on the handle to the underside of the nose of the handle. This measurement is often referred to as the backset or stack height and it is essential to know this information before you purchase the handle.

Cockspur handles are available as straight/universal, cranked or left- or right-handed versions. This allows the handles to be positioned on windows that open to the left or right and also to allow the user easier access to the window.

It is essential to determine whether or not your window requires a restrictor designed to prevent the handle from being opened beyond a certain point. Generally, these are required for high rise commercial buildings or flats due to security reasons. Most domestic homes don't require them.

There are a variety of styles and colors of cockspur handles, including white uPVC and install brushed steel. Selecting the right one for your windows will depend on your personal taste and style, as well as the way you would like the window to function.

Handles that tilt and turn

Tilt and turn handles are a popular style of handle which are commonly seen on double glazed windows in the UK. They can be found on both upvc and timber windows. The handle can be rotated at any angle, up to 180 degrees. This allows the window open into the room completely and to lower it for ventilation. The handle is locked in this position and requires the use of a key to unlock it when needed.

This kind of handle is able to be changed, since it only has one large handle and not multiple smaller ones. This improves the appearance of the handle, and is more in line with contemporary minimalist design trends. They are also much easier to clean as they are able to open inwards.

They are also up to 8 times stronger than casement window. This makes them ideal for larger windows and doors. The frames are also made of steel core, which provides additional durability and strength.

The tilt and turn mechanism is safer than that of the casement window, because the handle can be locked at any angle. This is especially crucial in areas where children are present because it stops children from opening a window.

Many homes opt for tilt and turn windows due to the fact that they can be used in a variety of ways. They can be opened horizontally, just like a regular window, dropped down in a hopper fashion to allow for ventilation, or tilted inwards for cleaning and maintenance. This is a great choice for those who wish to improve airflow in their homes and can also help with noise reduction. The glass is easily removed, making them easy to clean and maintain. These windows are available in a wide range of sizes and colors. They are a great addition to any type of home and complement both traditional and contemporary styles.

Crank Handles

Crank handles are easy to operate and offer fantastic views of the outside without obscuring the glass. These handles are usually used on casement windows hinged on the sides or awning windows. They have an mechanism similar to a window bar, and linkage arm, that supports the window sash. The window sash is opened or closed when you turn the handle clockwise. The mechanism of the crank window unlike other handles is frequently subjected to much wear and tear. This could result in the handle's gears to break or fall off the operator shaft. By inspecting the crank handle and the operator mechanism regularly will ensure that they stay in good condition for many years to be.

A crank handle consists of a mechanical shaft that rotates perpendicularly and is connected to an arm. The arm is turned in a circular direction by grabbing it and turning it in the same way that you would operate a sharpener. In certain applications, the handle may be leg-operated.

The base of a crank handle is hollow. It's this hollow that allows it to be connected to equipment and install machinery. The handle's arm also comes with a connecting rod which converts the circular motion of the handle into rotary or reciprocating motion that operates machines and equipment.

Boats are usually loaded onto trailers using crank handles, in addition to the adjusting equipment and machinery. They are typically made from stainless steel, which is resistant against corrosion in marine environments. Because of this, most boat crank handles are powder coated to shield them from damage and also to make them easier to clean.

Replace the crank handle in the event that it stops working or will not allow you to open the window. Find the trim mounting screws within the track of the window frame. If there aren't any, try to loosen the cover with a stiff putty knife by sliding it between the window jamb and the frame and pulling it. If this doesn't work, then you can take the cover off and open the crank mechanism by unscrewing the screws inside the window frame.