Double Glazed Window Repair

It is worth looking into the warranty included with the majority of double-glazed windows. It usually covers issues with window hardware, like hinges and locking mechanisms, in the first ten years.

A break in the seal is usually the reason for mist appearing between your glass windows. This issue must be repaired immediately to avoid damp or mould growing in your home.

Condensation Between the Windows

If condensation appears between your windows, this is an indication that the seal in the gas insulating the windows has failed. This is a serious issue that should be addressed immediately, particularly in the winter months when humidity levels are at their highest. This could also cause damage to sills and sealants, as well as mould.

Ideally double-glazed windows should not be able to experience condensation between the panes. This can be caused by high humidity or a very cold snap. Fortunately, this issue is repairable without having to replace the entire window. A professional can make small holes in the glass and spray the inside of the window with a specific cleaning solution. The moisture is then removed from the window. Additionally, an anti-fogger is installed to prevent the accumulation of moisture from happening again.

Condensation can also occur between the windows due to air leakage, or other causes outside the window. In this case, it may take longer for moisture in the window to build up as the air must be warm enough to vaporise the water molecules. In these cases it is more beneficial to replace double-glazed windows rather than attempt to repair the sealed units.

A double-glazed window is constructed up of two or three pieces of insulated glass that are held together by a metal frame. The gap between the two of the windows is filled with a non-toxic gas for insulation like argon or krypton, and then sealed tightly. The seal stops the insulating gases from escaping and also prevents air and moisture from entering the gap.

As windows age, the seals will get worse and allow moisture to leak into the gap between the glass panes. When seals fail it is essential to notice this because it indicates that the double glazing is no longer performing the way it did in the past. This could result in a decrease in efficiency in energy use, higher heating costs, damage to the property, and the risk of condensation developing between the windows.

Mist

It is perfectly normal to observe condensation on your windows. This means that your double glazing system is functioning properly and is keeping the heat inside your home. The condensation occurs because the air outside is warmer than the glass and reaches its dew point before the window. This is one of the great benefits of having good quality double glazing.

If the condensation is on the inside of your window then it could be a sign of a problem with the ventilation in your home. The excess moisture can't be absorbed and end up on the window, carpets, furniture, and other areas of your home. It is possible to prevent this by having it checked out by an expert and ensuring that there is plenty of fresh air in your home.

Another reason why you may have mist on your double-glazed window is that the seal between the two panes has broken down. This can be caused by wear and tear, or by using chemical cleaning products. If this happens the best solution is to get the windows repaired as soon as possible.

Having your windows professionally repaired will ensure that they remain waterproof and free of fogging, condensation and misting. It's also cheaper than replacing the windows, and you will save money on your energy bills.

A FENSA registered window installer can offer a price for the repair or replacement upvc door handles of your double glazed windows. Upgrade your windows to energy efficient ones that are A-rated when they are old.

It is a good idea to retain copies of any agreements and warranties with your window installers. It will be useful if you have any future problems with your windows. You can contact your window fitters and resolve the problem. This is a better option than ignore the issues that only make the problem worse and may lead to other problems in the home.

Close or open without difficulty

Double-glazed windows become difficult to open and close it's not just a nuisance but it could also result in an increase in energy costs due to heat loss and draughts. It can also pose security risk, particularly when the locks aren't working correctly. It is essential to fix any issues with double glazed windows and doors when you spot them.

If you can't open your window and have tried the simplest solution like using a screwdriver to prise it open, or tapping the frame with a tough object, then the issue may be more serious. The window could have moved and requires a reset or there could be a gap between the glass and frames. In either case, you must contact a double glazing repair expert to ensure that the repairs are done properly and to avoid any further issues.

It's not uncommon for UPVC window handles and lock mechanisms to become stuck or unusable, especially when they are worn and old. It usually happens due to a build-up of dirt or grease inside the handle. This is easily fixed by cleaning it using a upvc door for sale cleanser. If this doesn't work, you could try tapping the uPVC using a screwdriver. Be careful not to damage either the handle or window handle mechanism.

If this does not solve the issue it is likely that the window needs to be replaced since the hinges may no longer be in the proper position or the locking mechanism might have been damaged. In this instance, you must seek out a professional upvc windows and doors window repair expert.

David The Window Wizard is a specialist in double-glazed door and window repairs, including fixing a double-glazed window that has been blocked or locked. He has a wealth of experience converting discontinued window mechanisms to modern ones and often can save you the cost of replacing the entire window. Call or email us today for more details or a free estimate.

Warping

Double glazed windows are often an excellent option to save energy in the home. They consist of two panes that have a spacer or dense gas in between them. This creates a seal which keeps cold air out and warm air inside. However, over time, these windows may become damaged or broken and require repair. Most repairs can be completed without the need to replace the entire window.

One common problem that double-glazed windows face is warping. This happens when windows begin to bend, bow or twist, which may impact the structural integrity of the window and its insulating capabilities. Double-glazed windows should be installed correctly and maintained regularly to avoid this issue.

Contact a specialist when you realize that your double-glazed windows are sagging. This will help to prevent the situation from getting worse. They can inspect your windows to identify the cause. They will make use of specific tools to correct the problem and ensure that you windows are sealed properly.

A common cause of this issue is water vapour between the windows, which can build up over time. This could be due to a variety of factors, such as the weather conditions, humidity levels and UPVC window temperature fluctuations. To remedy this the expert will drill a small hole through the glass to let out the moisture. The specialist will apply a cleaner on the glass to cleanse it, then apply an adhesive.

If your windows cannot be closed or opened, it could be due to a broken mechanism or hinges. Before calling a professional to fix the issue, it's recommended to lubricate the parts. This will usually resolve the issue and decrease the need for replacements. If your windows are worn out or uPVC window do not provide the insulation you require It may be better to replace them.