Add a Sparkle to Your Fiat 500 Key Fob

Bring a bit of fun to your Fiat 500 Key Fob using these adorable Silicone Covers. The covers are easy to install and snap over your black cover.

The silicone covers shield the keys from dust, splashes and other contaminates. The covers made of silicone also make your keys appear more attractive. The signals of the remote control are not affected and will continue to function even when the cover is on.

Make sure your key is protected from dust, splashes and other contaminants

Add a touch of style to your key by using this silicone cover. It perfectly fits around the key fob and isn't slipping. It also shields your key from splashes and dust. The signals emitted by your key remote control will not be affected by the silicone cover so you are able to use the buttons on your key fob as normal.

Accessorize your Fiat 500 with these funky covers in Grey and Black. They are ideal if your original key cover is starting to look worn out, scratched or scratched. The covers are made from premium silicone and come with 2 key rings, meaning you can swap them out in case you become bored of one colour.

These covers replace the stock black key cover that is on your vehicle. You will need to remove the original key cover before you can install these covers.

Great look!

Fiat are a unique and well-known Italian brand and their cars are a striking style that sets them apart from other brands. These stylish car key covers are a simple and enjoyable option to add a touch of sparkle to your keys without being too loud. They look great on your key fob and can help to refresh the look of a worn-out key.

These covers are made to replace the original black cover. They snap into place quickly. It is recommended to remove the original cover before installing the new one.

The Fiat logo is available in both Grey and black. You can always alter it when you want to! These are also great gifts for Fiat 500 drivers.

Easy to install

Fiat 500 key covers can be a great method to modernize your keys. They come in a variety of styles and colors, so you can pick the right one that matches your personal style. The best part is that they're easy to install, which means you can do it yourself in just ten minutes. You'll require a screwdriver and some patience. The first step is taking off the cover that was originally installed. This needs to be removed before the new cover can be put in place.

Once you have removed the old cover, use a flathead screwdriver to pull out the four major attachment clips on the side that is on the passenger side of the fob assembly. These are marked with red on the photo below. Also note the tabs that locate slots that are highlighted in yellow. They need to be disengaged as well.

After removing the battery replace it with a new CR2032 3 volt coin cell battery. Make sure that the "+" positive side of the battery is aligned to the opening in the fob, and that the"-" negative side is facing towards the rubber buttons.

Reattach the passenger-side mirror cover by aligning locating tabs. After you've done this then put the fob on the driver's side back into your car and test it. Press the push button located at the top of the key. If everything is working as it should the parking lights will be lit and the doors will lock.

Easy to remove

replacement fiat 500 key - www.dgtss.gouv.sn - 500 Key Covers are a great way to refresh your key fob. They are easy to install and are distinctive in appearance. They protect your key fob against dirt, scratches and smudges. However, before you are able to put on a new cover you must take off the original cover from your vehicle.

This is easily done by pressing the red "fiat 500 replacement key cost" button on the front of your key fob. By pressing the button, you will release a lever that allows you to slide out the switch for ignition on your key (1). After you have removed the key, you'll see a small round silver metal switch that has images of an unlocked and locked padlock next to it. This is the battery switch for the key fob. It is easy to change the battery by turning the switch half turn using a small screwdriver with a flat head.

The key fob has an embedded microchip that's used to communicate with the Body Control Module (BCM). When you insert the key in your Fiat, it depresses the ignition switch, which is used as a "key-in-ignition" reminder. The BCM can then read the transponder that is on the key fob, to verify the validity of the key.

You can also add a design twin pack to your key covers to give it an original and fun look. The covers snap in place over the original cover. They are available in Cream and Silver. The key cover will only function only if the original black cover is removed from your key fob.