What Is Secondary Glazing?

Secondary glazing is a cost effective method to increase the thermal efficiency and noise reduction of existing single glazed windows. In contrast to replacement primary windows it doesn't require removal of frames from the existing ones and is more sympathetic to the period homes.

A good company will be able to offer support following installation, with a courtesy call within a week or two to inquire about how your installation is going on. They should be FENSA-accredited and offer warranties.

Improved thermal efficiency

The addition of secondary glazing can help to reduce the loss of heat and window double glazing also eliminate drafts. It can also make your home more comfortable and quieter. But it's crucial to recognize that this kind of solution isn't a substitute for triple or double glazing, and can only provide an improvement in thermal efficiency.

Glass is not a great insulation but a layer of air or sometimes argon gas between two panes of glass can slow down the transfer of heat from cold to warm and help to reduce condensation. Double-glazed windows that have an insulation layer between the panes can prevent cold air from entering your home and keep warm air inside.

There are a myriad of different systems that can be installed by a DIY kit and others require professional installation. There are systems that fit sliding sash window frames and other frames that are already in use. Some can be opened and closed and close, while others are attached to the wall.

The most economical secondary glazing option is the 'lift-out' system, which is fitted inside the window that already exists and lifts it out of a secure channel. It is perfect for windows with sash or where access to the main window is restricted for instance, in a listed building or conservation area.

Based on the quality of the glass used and the type of gap between the primary and secondary windows, certain windows may have higher insulation levels than others. Generally speaking, the greater the gap between the two panes of glass the better the thermal efficiency will be.

In some cases adding secondary glazing to a house can boost its energy efficiency to a point where it can match the insulation provided by modern double glazing window or triple windows. This is particularly true for older homes where planning restrictions restrict the kind of replacement windows that can be installed. In these cases secondary glazing could be the most cost-effective method to insulate the frames of sash windows that were previously in use.

Reduced noise

Windows allow a significant amount of noise into homes. This is particularly a problem for those who live near flight paths or railway lines. In these situations upgrading to double-glazed windows can greatly reduce the impact of outside noise on a house. However it is not always feasible or can afford to change all their windows and this is the place where secondary glazing is required. This is the process of adding an additional window to the existing frame of a property. This second window provides an extra (sealed) barrier that helps to shield the home from cold temperatures as well as external noise.

Noise pollution can be an issue that could be detrimental to health for a long time when not addressed. Luckily, Ecoease offers a low-cost solution to help reduce the amount of outside noise that may be heard in your home. Our second double glazing near me is a great solution for those looking to reduce noise pollution without having to spend a fortune on replacing all their windows.

The main benefit of secondary glazing is that it creates an additional barrier between your home and the outside world, greatly reducing noise pollution. This is accomplished by installing an additional frame and pane within the original window with the gap being around 100mm. Unlike the primary window, the secondary window can be opened and closed to provide ventilation.

This barrier is also able to protect the room from cold air that would otherwise escape through the original window and into the wall. This helps keep the room warm and decrease energy costs.

The secondary glazing helps to reduce noise from traffic and activities outside. The additional barrier between your home and the outside world is an enormous comfort factor and can add value to your everyday life.

Another benefit of the system is that it can be adapted to almost any type of window double glazing such as windows with awnings as well as vertical sliding sash windows and Window Double Glazing even sliding doors. It can be used on individual windows or to multiple windows in a house and is a far cheaper option than replacing all your existing windows. It can also keep the appearance of your house and offer a more sympathetic solution for listed properties where changing windows may affect their appearance.

Increased security

Double glazing is usually thought to be an expensive alternative. This is not always the case. You can buy secondary glazing for a lot less than you might think, especially when you consider that it is an effective security option. In addition to offering insulation, it also serves as a second security measure that is hard for burglars to break into. Installing secondary glazing is a better choice over replacing windows which can be complicated in certain cases and may require permission for planning.

Unlike new windows, which can be made to suit any type of home, secondary glazing is designed to fit the inside of your existing window frames. It is a simple solution that offers several benefits, such as reduced energy bills and improved comfort. It also increases the security of your home by decreasing noise.

If you are looking for secondary glazing near you it is important to consider the quality of the products and the services provided by the installers. Make sure to ask about their accreditations, insurance documents and guarantees. You should also take into consideration how long the company has been in business. Selecting a reputable company will help you ensure that the job is completed correctly and efficiently.

The main benefit of secondary glazing is that it minimizes heat loss and improves draught-proofing by creating a second glass behind the existing window. This second pane is an insulating layer that decreases heat loss, and also reduces the intrusion of noise. It's also a cost-effective way to upgrade your existing windows without having to replace them all.

If you live in an older home with single-glazed windows, you're likely to spend lots of money on cooling and heating. Glass is a great conductor of heat. This means that you are losing your electricity or hot water through your windows when you're trying stay warm in winter.

The best method to tackle this issue is to invest in some secondary glazing. This type of window treatment is much cheaper than the installation of a brand new window and will provide you with a host of advantages, including improved insulation, lower energy bills as well as enhanced security. You can select from a variety of styles that include hinged units or secondary glazing that lifts out.

Improved appearance

One of the major concerns for many homeowners is the effect that replacing their windows would have on the look of their home. It is possible to achieve the energy efficiency of modern double glazing without altering the appearance of the property by installing secondary glazing instead. The process of installing it is a much simpler affair than replacing the windows that were originally installed and can be completed much quicker, too.

The process involves an entirely separate pane and frame positioned on the inside of the existing window, typically leaving a gap of around 100mm between them. The rubber seals also help to separate the room from the window double glazing, reducing sound transmission. It can also be used to improve the insulation of older buildings, where planning restrictions prevent the installation of modern double-glazed units, such as in conservation areas or listed buildings.

There are many styles of secondary glass available to meet your needs. They range from systems that open as windows to those that are fixed to the sash frames. Some are designed to be as discreet as possible with small frames that are hidden from view and unobtrusive internally. They are ideal for situations where regular ventilation is required because opening the sash can create a safety and health hazard.

Certain companies offer permanent aluminium secondary glazing that is installed on the outside of your existing window, offering more energy efficiency and a modern appearance. This is ideal for historic or listed buildings and is an economical option if you have budget limitations. You can choose the woodgrain and color to match your home's style so that it looks like it's always been there.

It is important that you choose a company that has experience in working on your specific property, and has a great reputation for customer service. It is also worth looking over reviews on the internet and asking for recommendations from friends and family. You should also verify whether the business is registered with professional organisations, such as the Glass and Glazing Federation.