Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they are not susceptible to corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and even be fatal. You should take the time to make sure that your windows are in good working order.

For single pane windows it is relatively easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. However, if you have double pane windows that are held in place by internal beading, Double glazed window repairs near me it will be more difficult to get rid of the existing panes and install new ones. In this instance, you will need to locate some plastic spacers that will help the new pane to fit correctly into the frame of the window.

If you're planning attempt to remove the window panes yourself it is important to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards fall onto the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea to tape the gap once the glass has been removed. This will keep drafts and water from getting into your property until a professional comes out to fix the window. It also acts as a barrier to prevent any intruders from getting into your home. If the gap is particularly large, you might want to consider using an alarm door that comes with an integrated window, as it offers the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they are susceptible to a range of problems including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from getting worse.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to unblock the windows to reach the frame. After that, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having repositioned your hinges. If you are happy with the size of the window, you can tighten screws to secure them in place.

If you aren't able to move the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and dry out and cause them to lose tightness. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is usually due to screws that have become undone over time, but it can be due to the mechanism of the handle wearing out. It's relatively easy to fix a loose uPVC hand. First, you'll need to shut the window and then perform an experiment fitting. The corners of the sash must be aligned with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to act if you awake each day to discover mouldy walls and floors that are wet. Windows that leak water do not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature within your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame is damaged or is missing.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may have to be removed. It is crucial to remember that when it is about uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed properly so that it drains away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotten sills are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage occurs between the double glazed window repairs near Me-glazed glass it is more likely the problem is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or loose and open with a breeze, it may be the hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's very simple to change the hinges on a window but it's much easier if someone helps hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation in the factory. This issue can be fixed by sending us a picture through our website and we will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window getting stuck and stop corrosion. The ideal time to do this once a year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. The hinges can also become misaligned due to wear, which can cause a gap where the sash meets frame. These can be easily repaired by giving them a good clean, but when they're beyond repair, it could be necessary to have them aligned or replaced. The interlock, which is located on the hinge side of the window and can also be misaligned, and again it is feasible to give them a clean but in certain cases, it may be necessary to get them replaced.

The next common reason for draughts are the window seals, these are prone to wear or damaged over time, and allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will lessen the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler, which can be hung over your window sill. They can help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. It is crucial to recognize that windows last for a certain period of time and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.