Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as timber and aluminum.

Cleaning and lubricating regularly UPVC windows and uPVC window repair doors is essential. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good shape.

Single-pane windows are relatively simple to replace and generally fit into old frames very easily. However If windows with double panes are held in place by internal beading, it will be more difficult to take out the existing panes and install new ones. In this case you'll need to find some plastic spacers that assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any shards fall onto the cloth instead of landing on the floor where they can be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop drafts and water from entering the property until a professional comes out and repair the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the distance between the window and the door is substantial, you may prefer security screens that has an opening. This will give you the best of both.

2. Sagging

Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, over time they may be afflicted by a variety of issues like sagging. A window that is sagging can cause problems with light, draughts, and even security. It's crucial to act when you realize that your uPVC windows are falling down.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to unblock the windows so you can reach the frame. Then, you can remove the hinges at the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in position.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, leading them to loosen. If this happens, it's essential to replace the seal as fast as possible to ensure your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. This is usually due to screws that have loosened over time, but it could be due to the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to close the window and do a test fitting. The corners of the sash need to align with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is important to take action if you get up each morning to discover mouldy walls and wet floors. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

This is a fairly simple fix that can be completed by any DIY expert. Based on the severity of the issue the caulking used previously may require removal before a fresh layer can be put on. It is essential to remember that when it comes to Upvc Window repair window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce the efficiency of your energy.

Make sure that the drainage holes have no debris in them and that the sill pan is properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Other indicators of water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread across the home.

If the leakage is occurring between the double-glazed glass it is more likely the issue is more related to the seal, not the frame. This can be easily corrected by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and blow open in a breeze it could be the hinges that are at fault. They can be easily repaired by any DIYer who is skilled and are usually completed in just a few minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. Changing a window hinge is essentially a very simple process but it can be easier if you have someone to help you hold the frame up.

Check that the uPVC hinges are closed and open in the right direction. You can do this by looking for the arrow on each hinge, this indicates the direction in which the window should be opened.

The problem with the hinges on windows can be caused by incorrectly opening the window in a particular manner or because of improper installation in the factory. Sending us a picture via our website will often solve the issue. We are more than happy to provide suggestions.

Regular lubrication of the hinges is also necessary. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using an oil that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 and other solvent based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges may also become disaligned as a result of wear, causing an opening between the frame and sash. If they're beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is located on the hinge side of the window, may also become misaligned, again it is possible to give them a good clean, but in some cases it might be necessary to have them replaced.

The seals may wear out or become damaged over time, Upvc window Repair allowing air escape. Installing high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. They can keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and they may reach an point at which it is more efficient to replace them than fix them. If you have any problems with your upvc window you should consult an expert immediately.